Collection: Genuine/Aftermarket Parts: Aftermarket parts

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×6×6mm
Inner diameter 4×4×4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter: 6x6x6mm
Inner diameter: 4x4x4mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Outer diameter: 6 x 8 x 8 mm
Inner diameter: 4 x 5 x 5 mm

■Size: Outer diameter 15mm, inner diameter 7mm

Takenoko elbow socket for waterline one-touch coupler

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

[Adaptation] 46mm to 48mm MIKUNI
[Quantity] 1 piece

This gasket has higher performance than the genuine product.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the gasket uses a metal material, so there is no tearing during maintenance!
Manufactured using a special manufacturing method, it has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

●Contains 10 female terminals.

●Compatible with SEA-DOO [Genuine product number: 710000837 710000836].

[Quantity] 2 pieces
This is a pin blind seal.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

●Replacement terminal.
●Quantity: 2 pieces

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

1/8 x 1/8 x 1/8 outer diameter 4mm inner diameter 1.8mm.

Attach between cooling hoses and use when changing routing or creating a bypass line.

[Compatible models] Sea-Doo
SEA-DOO 4-stroke 260/255/230/215/185/155/130 horsepower model (up to 2017)
(*Equivalent to genuine product number 420956741)

*Excluding SPARK 2018 and later models

External oil filter (*equivalent to genuine part number 420956741)

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

• Choosing a selection results in a full page refresh.
• Opens in a new window.