Collection: 新商品

Compatible with PWC 3 manufacturers
SEADOO <2015 and later models> Excluding SPARK Kawasaki, YAMAHA

The float is located on the life vest side to prevent the weight of the cord from swinging around.
When new, it will continue to remain buoyant even if left in a tank filled with calm water for a week.

■Size: Total length approx. 40cm, when extended approx. 1m30cm

【please】
*Before use, please check the cord for cracks and the crimped parts at any time.
*SD key registration is required, so please check with the dealer you purchased the hull from.
*This product is not compatible with the SD SPARK series.

*For Kawasaki and YAMAHA models, please select UFL2101, which is compatible with two manufacturers.

*Compatible with 2 manufacturers of Kawasaki YAMAHA models

The weight of the float on the life vest side prevents the cord from going wild.
When new, it will remain buoyant even if left in an aquarium filled with water without waves or wind for a week.

■Size: Total length approximately 40cm, approximately 1m30cm when extended

【please】
*Before use, please check the cord for cracks and the crimped part from time to time.
*For SEADOO models, please select UFL2201A, which is compatible with all manufacturers.

[Applicable] Hose outer diameter Φ15.8mm

[Application] To prevent the hose from coming off [Material] Clamp: All stainless steel, Body: Aluminum

We will make your hose look stylish.

JL80052BL Blue
JL80052RD Red
JL80052BK Black
JL80052PU Purple
JL80052SL Silver

■ Jet Ski / Motocross / Off-road / Trials / Enduro Goggles
■ Model: O Frame 2.0 PRO MX O-Frame Pro
■ Lens: Lexan®
■ Lens Color: Light Grey

■ Accessories: Microfiber storage bag
- Dual Switchlock® mechanism to securely hold the lens to the frame
- Contoured frame construction provides comfort
- Prizm™ lenses for maximum contrast and enhanced visibility
- Scratch-resistant anti-fog / impact-resistant Plutonite® lenses

■Applicable Models: KAWASAKI
16097-0007 ULTRA300/310 Series

【!】For ULTRA300/310, always use 16097-0007.

【About Oil Filters】
Inside the engine, sludge generated from impurities in fuel and oil, and metal particles from friction between cylinders and piston rings, etc., are produced.
Engine oil washes these away, allowing the engine to continue functioning normally.

Over prolonged periods, engine oil becomes dirty and degrades.
The filter cleans it, preventing re-adhesion of dirt and degradation.
The role of the oil filter is to maintain the oil's lifecycle for an extended period.

【Please Read Before Ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

■Compatible models: KAWASAKI
16097-0008 ULTRA260/250 Series (excluding 300/310) /STX-15F/12F(04)/15S

[!] For ULTRA300/310, always use 16097-0007.

[About Oil Filters]
Sludge generated from impurities in fuel and oil, and metal powder from friction between cylinders and piston rings, etc., accumulate inside the engine.
Engine oil washes these away, allowing the engine to continue functioning normally.

As this process repeats over a long period, the engine oil becomes dirty and degrades.
The filter cleans the oil, preventing re-adhesion of dirt and degradation.
The role of the oil filter is to extend the lifecycle of the oil.

[Please read before ordering]
This product is a **manufacturer-ordered item (genuine part)**.
Once an order is confirmed, it is promptly placed with the manufacturer, so cancellations or changes to order details due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We appreciate your understanding and ask you to place your order accordingly.

【Compatible models】
RXT/RXT-X/GTX/WAKE Pro (2018~) models without suspension

※For WAKE Pro (2010-2017), the part number is 295100720
※For WAKE (2011-2017), the part number is 295100724

295100697

Genuine SEA-DOO PWC Cover
Designed for a perfect fit, made with UV-resistant fabric.

●When selecting a product, please be sure to check the following items before placing your order.
1. Please carefully check the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About displayed prices
Prices and specifications are subject to change without notice.
If the listed price differs from the selling price due to manufacturer part number, price changes, etc., we will ship the product after receiving your approval.

【Information regarding genuine products】
※This is an ordered product※
※As this is a genuine product, cancellations and returns after ordering are not possible※

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we promptly place the order with the manufacturer. Therefore, cancellations and changes to order details due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

【Compatible Models】
SEA-DOO WAKE (2011-2017)

※For WAKE Pro (2010-2017), use part number: 295100720
※For WAKE Pro (2018), use part number: 295100697

Genuine SEA-DOO PWC Cover.
Designed for a perfect fit and made with UV-resistant fabric.

【Important Information Regarding Genuine Products】
※This is an取り寄せ商品 (ordered-in-item)※
※As this is a genuine product, cancellations and returns after ordering are not accepted※

●When selecting a product, please ensure you check the following items before placing your order:
1. Please carefully confirm the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; thank you for your understanding.

【Please Read Before Ordering】
This product is a **manufacturer取り寄せ商品 (ordered-in-item) (genuine part)**.
As we promptly place orders with the manufacturer after your order is confirmed, cancellations and changes to order content due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Compatible models】SEA-DOO
GTR215 (2012-2017)
GTR230/GTR-X230 (2017-2019)
*For GTR-X, part number: 295100721 (280000543)

Genuine SEA-DOO PWC cover.
Designed for a perfect fit, made with UV-resistant fabric.

【Information regarding genuine products】
*This is an取り寄せ item*
*As this is a genuine product, cancellations and returns are not possible after ordering.*

●When selecting a product, please be sure to confirm the following before ordering:
1. Please carefully check the manufacturer, 2. model name (common name), 3. model year, etc., before purchasing.
●Regarding listed prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; thank you for your understanding.

【Please read before ordering】
This product is a **manufacturer取り寄せ item (genuine part)**.
Once an order is confirmed, we promptly place an order with the manufacturer. Therefore, cancellations or changes to order contents due to customer convenience are generally not accepted.
Furthermore, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Applicable Models】SEA-DOO GTI / GTI SE / GTI Limited

GTI130 / GTI SE130 / 155 / GTS
*All models from 2011 onwards

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an ordered product*
*As this is a genuine product, cancellations and returns are not possible after ordering*

●When selecting a product, please be sure to check the following before ordering.
1. Please confirm the manufacturer, 2. model name (common name), 3. model year, etc., before purchasing.
●Regarding displayed prices
Prices and specifications are subject to change without notice. The listed price and actual selling price may differ due to changes in manufacturer part numbers or prices. In such cases, we will contact you before shipping; your understanding is appreciated.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, we promptly place the order with the manufacturer. Therefore, cancellations or changes to the order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We ask for your understanding in advance when placing your order.

【Applicable models】SEA-DOO
RXP-X (2012-2017)
GTR-X

280000543

Genuine SEA-DOO PWC cover.
Designed for a snug fit and made with UV-resistant fabric.

【Information regarding genuine products】
*This is a back-ordered product.*
*As this is a genuine product, cancellations and returns after ordering are not permitted.*

●Please be sure to confirm the following before selecting a product and placing an order.
1. Please confirm the manufacturer, 2. model name (common name), 3. model year, etc., carefully before purchasing.
●Regarding listed prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; thank you for your understanding.

【Please read before ordering】
This product is a **manufacturer-取り寄せ商品 (genuine part)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience will generally not be accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Compatible Models】
SEA-DOO WAKE PRO (2010-2017)
*For WAKE (2011-2017), the part number is 295100724.
*For WAKE Pro (2018), the part number is 295100697.

Genuine SEA-DOO PWC Cover.
Designed for a precise fit and made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an取り寄せ (order-on-demand) product.*
*As this is a genuine product, cancellations and returns are not possible after ordering.*

●When selecting a product, please be sure to confirm the following before placing your order:
1. Please carefully check the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●Regarding Displayed Prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers or prices, the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; your understanding is appreciated.

【Please Read Before Ordering】
This product is an **order-on-demand item (genuine part)**.
As orders are placed with the manufacturer immediately after confirmation, cancellations or changes to order details due to customer convenience are generally not accepted.
Additionally, delivery may take time depending on the manufacturer's stock status. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Compatible Models】SEA-DOO GTX/RXT Series (2010-2017) *Models without suspension
GTX 155/215／Limited
GTX Limited
RXT 260
RXT-X260 / RXT-X300RS
*For iS-equipped GTX series (2017), GTX-S, please refer to part number: 295100718
*For iS-equipped GTX series (2009-2016), please refer to part number: 280000460
*For RXT-Xas (with suspension), please refer to part number: 280000586

●Genuine SEA-DOO PWC cover.
●Designed for a perfect fit and made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an取り寄せ (order-on-demand) product.*
*As this is a genuine product, cancellations and returns are not accepted after your order has been placed.*
--------------------------------------------------------------------------
●Please ensure you check the following points before selecting a product and placing an order.
1. Please confirm the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About Displayed Prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price.
In such cases, we will contact you before shipping. Thank you for your understanding.

【Please Read Before Ordering】
This product is a **manufacturer order-on-demand item (genuine part)**.
As we promptly place orders with the manufacturer upon confirmation of your order, cancellations or changes to your order content due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these points in advance.

【Compatible Models】SEA-DOO GTX *Models with iS (suspension)
GTX S155 (2012-2016)
GTX Limited S (2017)

*For GTX models without iS, use part number: 280000472
*For GTX Limited iS (2009-2016), use part number: 280000460

Genuine SEA-DOO PWC cover.
Designed for a snug fit, made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an order-to-stock item.*
*As this is a genuine product, cancellations and returns are not permitted after ordering.*

●Please ensure you check the following before ordering to select the correct product.
1. Please carefully confirm the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About Displayed Prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers or prices, the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; please be aware of this in advance.

【Please Read Before Ordering】
This product is an **order-to-stock item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

【Compatible models】SEADOO SPARK 3-seater

* Previously, the shape varied depending on whether the "Adjustable Riser" accessory part was installed, but now it is common to all types. Therefore, there may be some tab formation. Please be aware of this in advance. 295100789 (Old part numbers: 280000688 / 295100707)

Genuine SEADOO PWC cover. Easy to install due to its strap-free design. The fabric is dyed to enhance UV protection. It also comes with a patented air release vent system for trailering, and an interior pouch to store the cover when not in use.

【Information on Genuine Products】
* This is an ordered product *
* As this is a genuine product, cancellations and returns are not possible after ordering *
--------------------------------------------------------------------------
● When selecting a product, please be sure to check the following items before ordering.
1. Please check the manufacturer, 2. model name (common name), 3. model year, etc., carefully before purchasing.
● About displayed prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you before shipping. Please be aware of this in advance.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

【Compatible Models】SEADOO SPARK 2-seater
※Previously, the shape differed depending on whether the "Adjustable Riser" accessory part was installed or not, but now it is common to all types.
※Therefore, there may be some looseness. Please be aware of this in advance.
295100671 / 295100706 / 295100912

SEADOO genuine PWC cover. Easy to install due to its strap-free design.
The fabric is dyed to enhance UV protection.
It also comes with a patented air release vent system for trailering and an interior pouch to store the cover when not in use.

【Information Regarding Genuine Products】
※This is an ordered product※
※As this is a genuine product, cancellations and returns are not possible after order placement※

●When selecting a product, please be sure to check the following items before placing your order.
1. Please check the manufacturer, 2. model name (common name), 3. model year, etc., carefully before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price and the actual selling price may differ due to changes in manufacturer part numbers, prices, etc. In such cases, we will contact you before shipping; please be aware of this in advance.

【Please Read Before Ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to order content due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
We ask for your understanding and cooperation when placing your order.

Compatible with SEA-DOO DESS system (programming required).
As this is a genuine product, prices are subject to change without notice.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
To promptly place an order with the manufacturer after your order is confirmed, cancellations or changes to your order are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

This is a life jacket from Slippery, a popular brand designed with children's safety in mind.
Being a nylon type, it's lightweight, and post-use maintenance is as simple as rinsing with water.
It's part of the same series as the adult model, so you can enjoy coordinating colors with your child.

■Recommended Height
Child: 100-120cm (with crotch strap)

Sea bathing, river play, pool, water play, safety aid, kickboard for children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP, paddleboarding, canoeing, snorkeling, personal watercraft, jet ski

■Material: Brass
JL003-6: 1/8 x 1/8 pulse 90° (thread 10mm: P0.9: outer diameter 7mm)

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IWF-22 / BR7HS
[2] Compatible with IWF-24 / BR8HS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IWF-22 / BR7HS
[2] Compatible with IWF-24 / BR8HS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IW-24 / BR7ES/8ES
[2] Compatible with IW-27 / BR9ES
[3] Compatible with IW-31 / BR9ES~10ES

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IW-24 / BR7ES/8ES
[2] Compatible with IW-27 / BR9ES
[3] Compatible with IW-31 / BR9ES~10ES

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IU-24A / CR8EK
[2] Compatible with IU-27 / CR9EB/PMR9B

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IU-24A / CR8EK
[2] Compatible with IU-27 / CR9EB/PMR9B

[Manufacturer part number/compatible model]
[1] IK-16 / ZFR-4F-11 compatible SEA-DOO DI
[2] IXU-24 / DCPR8E compatible SEA-DOO 4st (excluding SPARK) -
[3] Compatible with IKH-20 / LFR6A-11 YAMAHA SHO/FZR/FZS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible model]
[1] IK-16 / ZFR-4F-11 compatible SEA-DOO DI
[2] IXU-24 / DCPR8E compatible SEA-DOO 4st (excluding SPARK) -
[3] Compatible with IKH-20 / LFR6A-11 YAMAHA SHO/FZR/FZS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible model]
[1] IK-16 / ZFR-4F-11 compatible SEA-DOO DI
[2] IXU-24 / DCPR8E compatible SEA-DOO 4st (excluding SPARK) -
[3] Compatible with IKH-20 / LFR6A-11 YAMAHA SHO/FZR/FZS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

●Applicable YAMAHA [003-520]: 003-505 replacement 155mm
[003-521]: 003-506 & 507 replacement 144mm
[003-522]: 003-508 replacement 155mm

【please note】
This is a replacement wear ring exclusively for WSM housings.
Wear ring only, pump housing not included.
Colors may vary depending on arrival time. Thank you for your understanding.

The one-shaft slide lever reduces the frustration of not getting caught, which is common with two-shaft types. The 8” spoke wheels give it a cool look.

■Maximum load: 680kg/1500LBS
■Mounting frame: up to 76.2 x 127mm
■Stroke: Approx. 250mm
■Material: Steel
■Tire: Made of resin

[Staff comment]
The biggest feature of this jack is that it uses a "one shaft slide lever".
Most conventional jacks have two shafts, so they have a large clearance to fit two shafts into the holes at the same time, which tends to cause rattling.
As you use it, the shaft may not engage properly and may become wobbly.
The number of shafts is reduced from two to one, resulting in less rattling and clearance and superior durability.

The casters use spoke wheels and have a high quality and stylish finish.
The caster housing bracket is of the highest quality and durability, avoiding the use of cheap welding and using three-dimensional bending to strengthen its weight resistance.

【Compatible Models】
★YAMAHA SJ(96～) only
★KAWASAKI 550SXi/650SX/750SX/750SXi

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the hull's fiber parts.
This is a high-quality cover, from fabric to stitching, all made in Japan.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Reinforcement】Non-woven fabric is used as reinforcement on the mirror parts to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Please Note】
※The color of the stitching, tape, and bands may vary depending on the time of arrival.
※As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Applicable models】YAMAHA
VX Series (~2014)
VX / 110DX / CRUISER / VXR* / VXS
*For the new VXR, part numbers [Y-5S-1: Silver, Y-5B-1: Black] are compatible.

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to sewing.

1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as backing in the mirror area to prevent chafing.
3. 【Handle】The handle area is double-layered for reinforcement.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*Due to made-to-order production, returns, exchanges, and cancellations are not possible after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Y-5B (Y-1) Black

【Applicable Models】YAMAHA
FX (up to 2011 models), FZS (up to 2012 models)
FX140 / FX160 / HO (06-11) / SHO (08-11) / Cruiser / FZS (-16)
*For FX 2012 models and later, part number Y-12 is compatible.

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover produced domestically, from fabric to sewing.

1.【Tape】Colored tape is used to make it easier to identify the front when putting on the cover.
2.【Reinforcement】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3.【Handle】The handle area is also reinforced with double-layered fabric.
4.【Buckle】Securely fastens to the hull with a single touch.

【Disclaimer】
*The colors of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】YAMAHA EX Series

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. 【Tape】Colored tape is used to easily identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after an order has been placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】YAMAHA
FX140 / FX160 / SHO / CRUISER / FZS
*Compatible with 2012-2014 models; for models up to 2011, part number Y-4 is suitable.
2014-2021 FX SVHO (including Cruiser)

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body and prevent damage to the hull's fiberglass parts.
This is a high-quality cover, domestically produced from fabric to stitching.

1.【Tape】Colored tape is used to clearly indicate the front when installing the cover.
2.【Backing】Non-woven fabric is used as backing in the mirror area to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of stitches, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Y-12B Black

【Compatible Models】SEA-DOO
1 [S-2B(S-3B)]: RX/RX D.I/HX
2 [S-XPB(S-6B)]: XP (97-)/XP-L
3 [S-RXP-B(S-2B)]: RXP/RXP-X 255 (*)
*RXP-X 260 RS 2012 models and later are not compatible.

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts.
From fabric to sewing, domestically produced in Japan, high quality.

Special Features
1. 【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as reinforcement in the mirror area to prevent rubbing.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after your order has been placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible models】SEA-DOO
1【S-2B(S-3B)】 ：RX/RX D.I/HX
2【S-XPB(S-6B)】 ：XP（97-）/XP-L
3【S-RXP-B(S-2B)】：RXP/RXP-X 255(※)
*RXP-X 260 RS from 2012 onwards is not compatible

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
From fabric to sewing, all made in Japan, high quality

Features
1. 【Tape】The front is marked with a colored tape to make it easy to identify when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as a reinforcement on the mirror parts to prevent chafing.
3. 【Handle】The handle part is also reinforced with double fabric.
4. 【Buckle】Securely fastens the hull with one-touch buckle

【Please note】
*The color of stitches, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies depending on the season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
1 [S-2B (S-3B)]: RX/RX D.I/HX
2 [S-XPB (S-6B)]: XP (97-)/XP-L
3 [S-RXP-B (S-2B)]: RXP/RXP-X 255 (*)
* Not compatible with RXP-X 260 RS 2012 and later

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High-quality, domestically produced fabric and stitching.

Features
1. [Tape] The tape is colored to make it easy to identify the front when putting on the cover.
2. [Backing] Non-woven fabric is used as backing in the mirror area to prevent chafing.
3. [Handle] The handle area is reinforced with a double layer of fabric.
4. [Buckle] Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the production lot.
* As this is a made-to-order product, returns, exchanges, and cancellations are not accepted after the order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
RXT / GTX / iS255 / As / WAKE PRO215 (all models from 2010 to 2017)
*WAKE models can be used with the pole removed.

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body and fiber parts.
High-quality domestic production from fabric to sewing.

Features:
1. 【Tape】Colored tape is used to easily identify the front when putting on the cover.
2. 【Lining】Non-woven fabric is used as a lining to prevent scuffing around the mirror.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】One-touch buckles securely fasten the hull.

【Please Note】
*The color of stitching, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so please inquire in advance if you are in a hurry.

S-255ISB Black

【Compatible Models】SEA-DOO
GTR230(2017-2020)
GTI 130(2011-17)
GTI SE 130(2020-24)
GTI SE 155(2011-13)
GTI SE 170(2026)
GTR215(2012-16)
GTR-X 230(2017-19)
WAKE 155(2011-16)

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and safeguard the fiber parts.
From fabric to stitching, all made in Japan for high quality.

Features
1. 【Tape】Colored tape is used to make it easier to identify the front when putting on the cover.
2. 【Lining】Non-woven fabric is used as a lining for the mirror part to prevent chafing.
3. 【Handle】The handle part is reinforced with a double layer of fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Disclaimer】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*Since this is a build-to-order product, returns, exchanges, and cancellations are not possible after placing an order.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-17B Black

【Compatible Models】SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-24)

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to stitching.

Special Features
1. 【Tape】 Colored tape is used to easily identify the front when covering.
2. 【Backing】 Non-woven fabric is used as backing for the mirror part to prevent rubbing.
3. 【Handle】 The handle part is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and band may vary depending on the production lot.
* As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-13B Black

【Compatible Models】SEA-DOO
RXP-X 300 (2016-2019)
RXP-X 260 (2012-2015)

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
Fabric and sewing are made in Japan, high quality

Features
1. 【Tape】 Colored tape is used to easily identify the front when putting on the cover.
2. 【Reinforcement】 Non-woven fabric is used as reinforcement for the mirror area to prevent chafing.
3. 【Handle】 The fabric on the handle area is doubled for reinforcement.
4. 【Buckle】 Securely fastens the hull with a single touch

【Please Note】
* The color of stitches, tape, and bands may vary depending on the time of arrival.
* Due to made-to-order production, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so please inquire in advance if you are in a hurry.

S-11B Black

【Compatible models】Exclusive for KAWASAKI 800SXR
*Part number "K-12" is compatible with 1500SX-R

【Material】Polyester material
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to sewing

Commitment to Quality
1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Handle】The handle area is reinforced with double-layered fabric.
3. 【Buckle】Securely fastens the hull with a single touch

【Disclaimer】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*Returns, exchanges, and cancellations are not accepted for made-to-order products after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so please inquire in advance if you are in a hurry.

K-SXR-BK Black