Collection: New product

【Compatible models】

■Impeller wrench for SEA-DOO SOLAS SRZ-TP twin impeller

[Application] A special tool required for attaching and detaching SOLAS Twin Impeller SRZ-TP.

【Compatible models】

■SEA-DOO Impeller wrench for SOLAS SRX/SRZ

[Application] A special tool required for installing and removing the impeller.

【Compatible models】
SEA-DOO for Sea-Doo SOLAS SR/SRB

impeller wrench

[Application] A special tool required for installing and removing the impeller.

[Compatible models] YAMAHA
800GPR / 1200GPR / 1300GPR / 800XL / 1200XLT / 1200XL-L

■SOLAS Impeller YF/YG/YQ/YD (Concorde)
■155XL pump, drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 800/1200/1300GPR/1200XLT/1200XL-L/FX140/160

SOLAS impeller YF / YG / YQ YD (Concorde) compatible
Drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller [for YB/YD-SC]
144 pump diameter drive shaft 18mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

【Compatible models】
■KAWASAKI KAWASAKI ALL models (excluding 450/550)
■SEA-DOO 2-stroke model

[Application] A special tool required for installing and removing the impeller.

■Float size: 97 x 69 x 69 cm
■Rope length: 18m
■Compatible with 1-4 rider towable tubes
■PVC specifications

●This is a tow rope for towing tubes.
●This item improves the performance of 1-4 rider towable tubes.
●Rope length can be adjusted to suit the towable tube.
●Reduces rope contact with the water surface and wake.
●Reduces tube submersion, making it easier to glide.
●Keeps the tow rope straight during towing and reduces spray caused by the rope.

The angled tip reduces resistance at the start, allowing for smooth towing.
The backrest also prevents lateral sliding.

■Size: 190×160×62cm
■Max. capacity: 2 people
■2 towing points
■PVC tube
■Nylon full cover
■Easy-to-connector attached to main unit (non-removable)
*Main unit only; pump and rope are not included.

[Comes with a free JSPTOKAI original bag, convenient for storing gear!]
A 56L large-capacity bag that can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The bottom is made of mesh material for good drainage.
This bag solves all your problems with carrying and storing gear!
Size: 50x45x25cm, Fabric: Clear PVC black mesh

This is a repair kit for PVC fabric tow tubes and banana boats.
■Set includes: PVC (30G) fabric 20x20cm and PVC adhesive

＜Application Instructions＞
1. Clean the area to be repaired.
2. Cut the patch into a round shape, larger than the damaged area.
(*Cutting it into a square may make it peel off easily)
3. Place the patch over the damaged area and mark its size with an oil-based marker.
4. Apply adhesive to the main body.
5. Once the surface is slightly dry, apply the patch.
6. Finally, tap the applied area with your hand to remove air and ensure a firm bond, then you are done.

【Note】Not suitable for repairing fabric seams or pressure-bonded areas.
Also, the package may change depending on the incoming lot.

This classic deck tube, with its simple design, offers a top-class thrilling experience as you tow close to the water's surface.

【Front Towing Specifications】
■Size: 187.5×155cm
■Maximum Capacity: 3 people
■Nylon Full Cover
*Tube only; pump and rope are not included.

【Comes with a JSPTOKAI Original Bag, convenient for storing gear!】
This 56L large-capacity bag can store up to four life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The mesh bottom allows for water drainage.
This bag provides an instant solution for carrying and storing all those items you used to struggle with!
(Size: 50x45x25cm / Fabric: Clear PVC with Black Mesh)

●The backrest has been raised to prevent falling into the water.
●The handle position has been changed to be easier to grip.
●A new boarding handle has been added, making for a safer ride.

This is the same shape as the AURHEAD Marble series, and can be pulled from either the front or back, doubling the fun!
The backrest also makes it easy for women and children with less arm strength to maintain their posture.
[This series is available in 2-person, 3-person, and 4-person models]

■Size: 220 x 203 x 124 cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover
*Main unit only; pump and rope are not included.

●Higher backrest prevents falling into the water.
●The handle position has been changed to make it easier to grip.
●Additionally, a new boarding handle has been installed to allow for safe riding.

It's the same shape as AIRHEAD's marble series, and can be pulled from either the front or the back, making it twice as fun!
Also, the backrest makes it easy for women and children with limited physical strength to maintain their body shape.

■Size: 190×185×114cm
■Maximum capacity: 3 people
■PVC tube
■Nylon full cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

●Higher backrest prevents falling into the water.
●Handle position has been changed to be easier to grip.
●New boarding handles allow for a more secure ride.

This is the same shape as AIRHEAD's Marble series,
and can be pulled from either the front or back for double the fun.
The backrest also makes it easy for women and children with less arm strength to maintain their posture.

■Size: 167×152×101cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover
*Main unit only, pump and rope are not included.

[Comes with a JSPTOKAI original bag for convenient storage of gear]

This 56L large-capacity bag can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The bottom is made of mesh material for good drainage. With this bag,
you'll have all the goods you always needed (size
: 50x45x25cm /fabric: clear PVC black mesh)

A new sensation featuring a flexible fabric "Flex Foam Seat" in the seat area. Like a deck tube, you can lie down, kneel, or sit on the seat, allowing both adults and children to enjoy it in their preferred riding style.
[This series is available in 2-person and 3-person models.]

■ Size: 183×152cm
■ Max capacity: 2 people
■ PVC tube
■ Nylon full cover type
*Main unit only; pump and rope are not included.

[Comes with a JSPTOKAI original bag, convenient for storing gear!]
This 56L large-capacity bag can store up to four life jackets. The U-shaped zipper allows the top to open wide for easy storage of marine gear.
The mesh bottom allows water to drain out. This bag is perfect for all the gear you always needed.
(Size: 50x45x25cm / Fabric: Clear PVC with black mesh)

By making the classic donut-shaped tube into an arrow shape, stability and controllability are improved, making it a standard model that can be enjoyed by both adults and children!

■Size: 127×122cm
■Maximum capacity: 1 person ■PVC tube ■Nylon half cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

The basic shape is similar to the Bubba series,
but the Bingo can reduce the amount of air pumped in and out due to its lower backrest.
With a backrest that fully supports your bottom, it can be considered a series designed for energy conservation.
Towing is possible from two points (front and back).
[This series is available in 2-person, 3-person, and 4-person models.]

■ Size: 175 x 172 cm
■ Max Capacity: 2 people
■ PVC Tube
■ Nylon Full Cover
■ Easy-to-Connect included

※ Main unit only; pump and rope are not included.
[140] (Yu-Pack)

The flex wing gives you complete control over the tube.
For those who are tired of just being pulled along!
Experiment with various maneuvers such as jumps, slaloms, and barrel rolls by shifting your center of gravity through weight transfer and changing your sitting position.
Find the playstyle that suits you best.
It also requires less air, making inflation a little easier.

■ Size: 188 x 178 cm
■ Max Capacity: 4 people
■ PVC Tube
■ Nylon Full Cover
■ Easy-to-Connect main unit included (non-removable)

[Comes with a FREE JSPTOKAI Original Bag, convenient for storing gear]

A 56L large-capacity bag that can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The mesh bottom allows water to drain.
This bag will solve all your problems with carrying and storing your gear!
(Size: 50x45x25cm / Fabric: Clear PVC Black Mesh)

Inflatable design

●Stable buoyancy allows up to 6 people to ride.
●Zippers on the sides allow connecting water walkways.
●Can also be connected to the separately sold slider [Part No. W19-2210].
●Recommended for use as a connecting passage between moored boats or as a pontoon.

■Product size: 183×305cm
■Maximum capacity: 6 people
■PVC specification
*This product cannot be towed.

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

【Dimensions】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects the hull of your beloved boat from scratches caused by ratchets and belts.
This large type can easily accommodate large, reinforced ratchets.
Made of the same material as wetsuits, it is soft, stretchable, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt is set on the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: Set of 2
■Material (main body): Chloroprene
■Mounting method: Velcro specifications

【Disclaimer】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
Please note that we cannot accept exchanges or returns except for product defects.

Pad Trailer Parts Trailer Ratchet Strap Wetsuit Fabric

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your precious boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates even large, reinforced ratchets.
Made from the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt has been set to the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1 piece
■Material (main body): Chloroprene
■Attachment method: Velcro

【Please note】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
We cannot accept exchanges or returns other than for product defects.

Trailer parts Boat trailer Lashing belt Wetsuit fabric

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your boat's hull from scratches caused by ratchets and straps.
This large type easily accommodates even large, heavy-duty ratchets.
Made from the same material as a wetsuit, it is soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the strap is set on the cargo.
Compared to types that must be threaded onto the strap beforehand, this type is significantly easier to use and highly recommended.

■Quantity: 2 pieces per set
■Material (main body): Chloroprene
■Attachment method: Velcro closure

※Standard size 【ULT131-M】 has a white logo
※Large size【ULT131-L】 has a red logo

Trailer parts Boat trailer Lashing strap ULT131BK

【Size】
■When rolled: 90×290mm
■When unrolled: 250ｘ290mm

Protects your boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates large, reinforced ratchets.
Made of the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because you can attach it after setting the belt to the cargo.
Compared to types that need to be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1
■Material (main body): Chloroprene
■Attachment method: Velcro closure

*Standard size 【ULT131-M】 has a white logo
*Large size 【ULT131-L】 has a red logo

Trailer Parts Boat Trailer Lashing Belt

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm (10")

This is a standard logo sticker from UNLIMITED that is instantly recognizable.
It's a sticker that we hope you'll not only put on your jet ski, but also on your car and daily goods.

Waterproof Car Seat Cover for Single Seat
・Easy to install: simply hang it over the headrest to fit most seats.
・Made of wet-suit material (chloroprene), so the surface may get wet but the inside remains waterproof!
・Prevents stains and moisture from directly penetrating your car seat, even if you get in with dirt or water.
・The back of the fabric is non-slip skin to prevent shifting.
・The rubber back belt securely holds the seat.
・Includes footwell pockets!

It protects your car's seats from sweat and dirt after water sports, mountain activities, and other field sports, as well as wear and tear from pets. Perfect for camping, swimming, and other outdoor activities!
Available in three colors—black, gray, and khaki—to match various car models.

■ For independent seats such as driver's or passenger's seats
■ Quantity: 1 piece

■ Material
Surface: Chloroprene
Back: Sliced skin

■ Product Details
Overall length of product: 152cm
Main body (excluding headrest): approx. W64 x L132cm
Headrest part: W24 x H20cm x D10cm
Pocket: H12 x W21cm (total 3 pockets)
Back elastic belt: W3 x L33cm (each side)
Top logo: W7 x H32cm
Bottom left pocket logo: W10 x H2cm
*Due to the nature of the fabric, there may be an error of approximately 1cm.

The popular UNLIMITED car seat cover has been upgraded.
With three pockets in the footwell and a back belt on the rear, usability has been significantly improved.
The footwell pockets are convenient for storing parking tickets, drinks, sunglasses, cleaning supplies, or sanitizing wipes, and come in handy when you have a lot of items for an outing!
They can be stored in an inconspicuous area in the footwell, helping to keep your car interior tidy.

The back belt is made of stretchy rubber. With a 33cm belt on each side and a generous 30cm of hook-and-loop fastener adjustability, it is easy to adjust.
Made from chloroprene fabric, which is used in wetsuits, water will not seep through to the back even if the surface gets wet.
It provides peace of mind when going out for marine sports, camping, or when traveling with children or pets.
When not in use, the car seat cover can be compactly folded and stored in the headrest area.

【Care Instructions for Neoprene Fabric Products】
・Due to the delicate nature of the fabric, do not use a washing machine, dryer, or bleach.
・If washing, we recommend hand washing with fresh water or a detergent specifically designed for neoprene.
・Please note that there may be wrinkles from folding upon opening, but this is not a product defect.

【Disclaimer】
As this product is imported, there may be slight differences in color, fabric texture, and detailed design depending on the time of arrival (production lot). Please note that there are no issues with functionality or usability, and purchase with this understanding.

Car seat cover, simply drape, waterproof, universal, neoprene, stylish

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

To install, just hang it on the rear seat top.
It's made from chloroprene fabric, which is used in wetsuits, so even if the surface gets wet, water won't seep through to the back. It's safe to have when going outdoors such as marine sports or camping, or when going out with children or pets.
Even if you ride in a wetsuit, the seat will not get wet.
The back side is made of skin material, so it's not only waterproof, but also stays in place even when you get in a car in a hurry.

Also, if you hang it from the trunk space side, it can also be used as a dirt-proof cover for the back space, which is very convenient.
Since it can be rolled up and stored, it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for the trunk room, a flat sheet for outdoor use, and a cold-proof sheet.
It has the best texture and is not too thick.

Not only marine wear, but also sweat and dirt after various field sports, wear and tear caused by pets, etc., are all you need to protect your car seats.

■Surface: Chloroprene ■Back: Slice skin ■Size: W125xH130cm

*Due to the elastic material, there may be an error of ±1 to 2 cm during the manufacturing process.
*The image of all seats is for illustrative purposes only.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
・There may be creases when opening the package, but this is not a product defect.

This cap features a large "LOOK FAST and GO FAST" logo.

The front panel of the cap has a custom embroidered logo.
The thick embroidery gives it a luxurious feel. The back features a gold brand embroidery.

The wide, flat brim, popular in street style, offers excellent fashionability.
While a curved brim blocks more sunlight from hitting your face, it also narrows your field of vision.
The UNLIMITED cap has a wide brim that blocks sunlight while maintaining a clear field of vision.

The red color on the inside of the brim emphasizes the design.
Add the cap to your casual everyday wear of sweats, printed T-shirts, and board shorts for a street-style look...it's a popular casual style.

It also looks great worn backward with a collared shirt or polo shirt.
The UNLIMITED cap has a logo on the back, leaving no detail overlooked.

■One size fits all...features a snapback closure (adjuster) at the back.

■Capacity: 500ml
■Size Diameter: 73×189mm
Body weight: Approx. 83g
Caliber: approx. 26mm

■Material Body/Hook: Aluminum Cap: Polypropylene/Silicone rubber

New collaboration item with bright red bottle color and double names “UNLIMITED” and “OUTDOOR” now on sale!

Perfect for both the office and outdoors!
It is strong and has no seams because it is molded using pressure from a high-purity aluminum plate.

Stainless steel is heavy and plastic is prone to deterioration.
Aluminum bottles are lightweight and do not deform, covering these weaknesses.
Sports drinks OK! The special stock processing on the inside keeps the taste of your drink.
It also prevents lingering odors, so you can use it without worrying about the last drink you put in it.

■UNLIMITED logo color 2 colors: “black” and “white” (OUTDOOR logo is white only)

*Suitable for ages 6 and up *Please do not add boiling water, dry ice, or carbonated water.
*Other precautions for use are listed on the product box. Please be sure to check before use.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

【Compatible models】All SEA DOO models
【Material】Polished stainless steel

【Size】
・Mounting hole pitch: Approx. 44mm
・Screw part: M8 x 24mm
・Hook part: 136 x 87 x 40mm (width x height x depth)
・Weight: Approx. 345g

Luxurious mirror-finished stainless steel!
Replacing the cheap genuine hook with this one will definitely enhance the visual appeal!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

【Compatible Models】SEA-DOO ST3 Hull
※RXT-X 325/300 , GTX-L 325/300 , GTX 230/170 , Wake Pro 170 ’18 and later

【Quantity】1 set of 10 parts
【Material】Stainless steel
【Thickness】1.5mm

Washers used for the seat base engine cover of the SEA-DOO ST3 Hull series.
Perfect for preventing biting when tightening the genuine engine cover and as an accent part!

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.