Collection: New product

RX450h 20 Series Late Model (Modellista) LEXUS MODELLISTA Lexus

Compatible Models (October 2019 - November 2021)
DBA-AGL20W
DBA-AGL25W
DAA-GYL20W
DAA-GYL25W

■Towing Capacity: 750 kg
■Mount: Slant Low Up
■Hitch Ball: Short Ball

【Steel (Steel Type)】
Taito Hitch's basic type.

【Set Contents】
Steel Hitch Ball / Steel Ball Mount / Steel Ball Mount Lock Key / 6-Core Wire / Vehicle-side Electrical Wiring Connector / Wire Tap / High-Tensile Bolts for Hitch Installation

【Regarding the Product】
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●As these are made-to-order products, cancellations and changes after placing an order are not possible.
●For some vehicle models, we may ask for a fax of your vehicle inspection certificate for fitment confirmation.

【Disclaimer】
・Please confirm fitment before placing an order. We cannot confirm fitment after an order has been placed.
・The photos are examples; the installation method and shape vary by vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As these are made-to-order products, returns and exchanges are not possible.

【About Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

TOYOTA HIACE 200 Series MODELLISTA
TOYOTA HI ACE 200 MODELLISTA
*Type 4 / Type 4.5 / Type 5 / Type 6 / Type 7

*Applicable Models
KR-KDH 200V/205V/200K
ADF-KDH 201V/201K/206V/206K
LDF-KDH 201V/201K/206V/206K
QDF-KDH 201V/201K
QDF-GDH 201V/201K/206V/206K
CBF-TRH 200V/200K
3BF-TRH 200V/200K
GDF-KDH 201V
3DF-GDH 201V/201K/206V/206K

■Towing capacity: 750kg
■Mount: Slanted type
■Hitch ball: Short ball
■Compatible with both diesel and gasoline vehicles
*Through-bolts are used for the rear mounting bolts of the vehicle to increase strength.
*Through-bolts cannot be used if floor mats are laid inside the vehicle.
*If your vehicle has floor mats, please let us know before ordering and we will ship with stay-nuts.

【Steel (Steel Type)】
The basic type of TIGHT HITCH.

【Set Contents】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High-tension bolts for hitch installation

【Regarding the Product】
●All hitch members are made-to-order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●As these are completely build-to-order products, please note that cancellations and changes after ordering are not possible.
●For some vehicle models, we may request a FAX of the vehicle inspection certificate for fitment confirmation.

【Disclaimer】
・Please confirm suitability before ordering. Please refrain from suitability confirmation after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As these are build-to-order products, returns and exchanges are not possible.

【About Delivery】
Delivery to Okinawa Prefecture will be quoted separately each time.

Land Cruiser 70 Series 2023 Reissue Reinforced Version Product
TOYOTA LANDCRUISER

Compatible model: 3DA-GDJ76W

■Towing Capacity: 2,000kg
■Mount: Slant Long Type Downward
■Hitch Ball: Short Ball
*Requires drilling

【Steel (Steel Type)】
Tight Hitch's basic type.

【Set Contents】
Steel Hitch Ball / Steel Ball Mount / Steel Ball Mount Lock Key / 6-Core Wire / Vehicle-Side Electrical Wiring Connector / Wire Tap / High-Tension Bolts for Hitch Installation

【Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

Land Cruiser 70 Series 2023 Reissue
TOYOTA LANDCRUISER Toyota

Compatible model 3DA-GDJ76W

■Towing capacity: 750kg
■Mount: Slant long type, downward
■Hitch ball: Short ball
*Bolt-on installation

【Steel (Steel Type)】
Tight Hitch's basic type.

【Set Contents】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wiring tap / High-tension bolts for hitch installation

【Regarding the Product】
●All hitch members are ordered. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on car model and material.
●As this is made-to-order production, please note that cancellations and changes cannot be made after placing an order.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before ordering. Please refrain from compatibility checks after placing an order.
・The photos are examples, and the installation method and shape vary depending on the car model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【About Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

TOYOTA LANDCRUISER 250
・Land Cruiser 250 series
・Land Cruiser 250 series Modellista

■Compatible Model: 3DA-GDJ250W

■Towing Capacity: 1,000kg
■Mount Slant: Low, Downward ■Hitch Ball: Short
Ball
*Bolt-on installation / No bumper removal required Steel

[(Steel Type)] Tight Hitch
's basic type.

[Set Contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wiring tap / High-tension bolts for hitch installation

(Estimated delivery time: approximately 5 days to 2 weeks*) *Varies depending on car model and material. ●As this is a build-to-order product, cancellations and changes after ordering are not possible. ●For some
car
models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

[Important Notes]
・Please confirm compatibility before ordering. We will not be able to confirm compatibility after an order has been placed.
・The photos are examples, and the installation method and shape may differ. Also, processing may be required on the vehicle side, so please contact us for details.
.

【Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

Land Cruiser 300 Series Wald Aero Toyota
TOYOTA LANDCRUISER 300 WALD AERO
[SPORTS LINE BLACK BISON EDITION]

Applicable Model: 3BA-VJA300W

■ Towing Capacity: 750kg
■ Mount: Slanted low type
■ Hitch Ball: Long ball
*Bolt-on installation

[Steel (Steel Type)]
Tight Hitch's basic type.

[Set Contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wire tap / High-tension bolts for hitch installation

[Regarding the Product]
● All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on the car model and material.
● As this is made-to-order production, cancellations and changes after an order is placed are not possible. Please be aware of this.
● For some car models, we may ask you to fax your vehicle inspection certificate for fitment confirmation.

[Disclaimer]
・Please confirm compatibility before placing an order. We kindly request that you refrain from confirming compatibility after placing an order.
・Photos are examples, and the installation method and shape vary depending on the car model. In some cases, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[About Delivery]
Shipping costs for delivery to Okinawa Prefecture will be estimated separately.

Land Cruiser 200 Series Modellista Late Model
TOYOTA LANDCRUISER MODELLISTA
Minor change after August 2015

Compatible Model Numbers
CBA-UZJ200W
CBA-URJ202W

■Towing Capacity: 750kg
■Mount: Slanted Type
■Hitch Ball: Short Ball

【Steel (Steel Type)】
Tight Hitch's basic type.

【Set Contents】
Steel Hitch Ball / Steel Ball Mount / Steel Ball Mount Lock Key / 6-Core Wire / Vehicle-side Electrical Wiring Connector / Splicing Tap / High-Tensile Bolts for Hitch Installation

【Regarding the Product】
●All hitch members are order-based. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on the vehicle model and material.
●As these are made-to-order products, cancellations and changes after placing an order are not possible. Thank you for your understanding.
●For some vehicle models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from compatibility inquiries after ordering.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please inquire for details.
・Returns and exchanges are not possible for made-to-order products.

【About Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

- 20-inch outseam
- DuraStretch polyester body 8% spandex
- Adjustable closure with zip fly
- Left and right side zipper stash pockets with key loop
- Full body self-fabric panel and piping
- Sublimated and embroidered logos / Self-fabric waistband
- Triple stitched crotch panel throughout
- Custom trim

■ Material: 92% polyester, 8% spandex
■ Specifications: Zippered pocket on the right leg of both sides

■ Jetpilot Recommended Waist Sizes
　28 inches (76-80cm)
　30 inches (78-82cm)
　32 inches (82-86cm)
　34 inches (84-88cm)
　36 inches (86-90cm)
　38 inches (88-92cm)
*Applicable waist sizes vary by design.

Boardshorts, surf pants, swim shorts, beach, pool, resort
Jetski, personal watercraft, wakeboarding, surfing, flyboarding
Kite surfing, famous brand, popular, JET-PILOT, America, Australia
Outdoor, marine activities, SURF, WAKEBOARD, SUP, paddleboard
Kayak, canoe, trekking, river play, jet ski

This rash shirt offers a dry, quick-drying, and cool wearing experience.

It's a loose-fit hoodie rash guard designed to avoid showing body lines.
Its quick-drying properties have evolved it into a versatile piece of clothing for outdoor activities like the pool.

It features UPF50+ protection to shield your skin from UV rays.
Perfect for marine sports, field sports, and even running!
It can be used as a rash guard with the feel of a T-shirt.
*Sizes are manufacturer's guidelines, so there may be slight differences from the actual product.
*Please note that this is for the top only; pants are not included.

■Size
8/S: Length 55.5cm, Width 37cm, Shoulder Width 38cm, Sleeve Width 49cm
10/M: Length 60cm, Width 41cm, Shoulder Width 42cm, Sleeve Width 50cm
12/L: Length 62cm, Width 44cm, Shoulder Width 45cm, Sleeve Width 53cm

JETPILOT PACER LONG SLEEVE HOODIE RUSH BLACK
Pacer Long Sleeve Hood Rash (S24024) - Black

A new model equipped with a GoPro mount on the left chest!
It features never-before-seen specifications such as pockets with enhanced storage capacity on D-rings at various locations, and tandem grips on both sides.

This is a JCI preliminary inspection-approved life jacket that complies with inspections for small special vessels such as jet skis. It is made of soft neoprene material (wetsuit fabric) and fastens with a front zipper.

Neoprene types are popular for their comfortable feel, as well as a fit and luxurious feel not found in nylon types.
With buoyancy and a snug fit, this new type of life vest can be used not only for personal watercraft but also for all marine sports.
Another feature is the "Super Grips" on both sides, equipped for tandem riding.

■ Applicable chest sizes

M: 90-95cm (98/92cm)
L: 95-100cm (107/98cm)
XL: 100-105cm (113/106cm)

■ US Coast Guard certified product (JCI statutory equipment compliant)

Personal Watercraft PWC Jet Ski Kawasaki JETSKI SEADOOYAMAHA MARINEJET Marine Jet Life Vest Small VesselSpecial JCI Inspection Japan Craft Inspection Organization Boat Inspection SUP WakeboardMarine Sports Wetsuit River Play Sea Bathing Life VestLife Jacket

JETPILOT RX's "VAULT" is a new side entry model for 2025.

Durable nylon and high quality PVC foam ensure high safety standards.
Equipped with "Lanyard WD Ring".
The side entry type is easier to put on and take off than the pullover type.
We also recommend coordinating the series with gloves, tops, shorts, etc.

■ Suitable chest size
S/M(80-100cm)
L/XL(100-120cm)

■ Actual size when laid flat (chest circumference (inner dimension)/total length/body length)
S/M (104(85)cm/ 53cm/ 28cm)
L/XL(107(88)cm/55cm/32cm)
*Please note that there may be some errors due to measurements taken by our staff.

■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)

Personal watercraft PWC Jet ski Kawasaki JET Jet ski SEADOO YAMAHA MARINEJET Marine jet Life jacket Small vessel special JCI inspection Japan Small Craft Inspection Organization Ship inspection SUP Wakeboard
Marine sports, wetsuits, river activities, swimming, life vests, life jackets

VENTURE JETSKI BAR BAG

■Size: Outer dimensions approx. 22cm x 12cm x 12cm

・Water-repellent storage
・Touchscreen window
・Mesh smartphone shade with Velcro
・600D RPET polyester fabric
・Loops for attachment points
・Front pocket with rubber badge

*Not completely waterproof. We are not responsible for any damage, loss, or disappearance of belongings, including your body and smartphone, or data, when using this product.

These long pants are incredibly lightweight at just 400g and extremely comfortable!
They are robustly designed to withstand harsh conditions.
Please use them in various situations, such as outdoor activities and sports.

◎Lightweight material with patented JetLite™ thermoregulation
◎Ergonomically tailored for optimal comfort and functionality
◎Breathable inner gusset provides an ultra-lightweight feel
◎Triple-stitched construction with webbing for enhanced support and stability.
◎Abrasion and heat-resistant panels on the inside of the knees.
◎Covered zipper fly for durability and functionality, and fade-resistant sublimated graphics

※Not made of wetsuit fabric.
※Please wear them as outer pants over underwear or other garments.

■Manufacturer's Recommended Sizes
28 inches: W80cm H98cm  Hem width 14.5cm Rise 32.5cm Inseam 71.5cm Total length 99cm
30 inches: W84cm H103cm Hem width 14.5cm Rise 34cm Inseam 73cm Total length 100cm
32 inches: W87cm H109cm Hem width 15cm Rise 36cm Inseam 73cm Total length 102cm
34 inches: W94cm H114cm Hem width 15cm Rise 37.5cm Inseam 74cm Total length 104cm
36 inches: W97cm H120cm Hem width 16cm Rise 39cm Inseam 75cm Total length 106cm
38 inches: W100cm H128cm Hem width 16.5cm Rise 39.5cm Inseam 76cm Total length 107cm
40 inches: W103cm H134cm Hem width 16.5cm Rise 40cm Inseam 77cm Total length 109cm

Beach swimming pool resort personal watercraft jet ski wakeboard surfing flyboard kitesurfing famous brand popular JET-PILOT USA Australia outdoor marine activities SURFING WAKEBOARD SUP paddleboard kayak canoe trekking river play jet ski off-road motorcycle

- Leg length 20 inches
- DuraStretch polyester body 8% spandex
- Adjustable closure
Zipper fly
- Hidden zippered side pockets with key loops
- Full body self-fabric panels and piping
- Sublimation and embroidery logo syo-tu
Self-fabric waistband
- Triple stitched crotch panels on all sides
- Custom Trim

■Material: 92% polyester, 8% spandex
■Specifications: Zippered pockets on both sides and right leg

■Jetpilot recommended waist size: 30 inches (78-82 cm)
32 inches (82-86 cm)
34 inches (84-88 cm)
36 inches (86-90cm)

*Applicable waist size varies depending on the design.

Board shorts, surf shorts, swimming trunks, beach, pool, resort, jet ski, water bike, wakeboard, surfing, flyboard, kite surfing, famous brand, popular, JET-PILOT, USA, Australia, outdoor, marine activities, SURF WAKEBOARD, SUP, paddle board, kayak, canoe, trekking, river play, jet ski

- 20-inch inseam
- DuraStretch polyester body, 8% spandex
- Adjustable closure
- Zipper fly
- Left and right side zipper hidden pockets with key loop
- Full body self-fabric panel and piping
- Sublimated and embroidered logo shorts
- Self-fabric waistband
- Triple-stitched crotch panel throughout
- Custom trim

■ Material: 92% polyester, 8% spandex
■ Specifications: Zippered pocket on the right leg of both sides

■ Jetpilot Recommended Waist Sizes
30 inches (78-82cm)
32 inches (82-86cm)
34 inches (84-88cm)
36 inches (86-90cm)

*Applicable waist sizes vary by design.

Board shorts, surf pants, swim trunks, beach, pool, resort
PWC, jet ski, wakeboard, surfing, flyboard
Kitesurfing, famous brands, popular, JET-PILOT America, Australia
Outdoor, marine activities, SURF WAKEBOARD SUP paddleboard
Kayak, canoe, trekking, river play, jet ski

- Leg length 20 inches
- DuraStretch polyester body 8% spandex
- Adjustable closure
Zipper fly
- Hidden zippered side pockets with key loops
- Full body self-fabric panels and piping
- Sublimation and embroidery logo syo-tu
Self-fabric waistband
- Triple stitched crotch panels on all sides
- Custom Trim

■Material: 92% polyester, 8% spandex
■Specifications: Zippered pockets on both sides and right leg

■Jetpilot recommended waist size: 30 inches (78-82 cm)
32 inches (82-86 cm)
34 inches (84-88 cm)
36 inches (86-90cm)

*Applicable waist size varies depending on the design.

Board shorts, surf shorts, swimming trunks, beach, pool, resort, jet ski, water bike, wakeboard, surfing, flyboard, kite surfing, famous brand, popular, JET-PILOT, USA, Australia, outdoor, marine activities, SURF WAKEBOARD, SUP, paddle board, kayak, canoe, trekking, river play, jet ski

This MOTO JERSEY top is a loose-fitting style that doesn't show your body lines.
High water repellency means no friction with the skin from life jackets, etc.
UPF50+ sunscreen protects your skin from UV rays.

It can be coordinated with board shorts and gloves from the RX series.

■ Actual measurements when laid flat (chest circumference/length/sleeve length)
M size: 108cm/72cm/65cm
L size: 112cm/75cm/68.5cm
XL size: 114cm/76cm/70.5cm
*Please allow for some error as measurements are taken by our staff.

These are light gloves from the popular RX VAULT series.
This model prioritizes comfort by eliminating hard pads and other bulky features.
You can operate your smartphone while wearing them.

■Applicable sizes (Palm width/Overall length/Middle finger length)

(XS)18.0cm/18.0cm/9.0cm
(S)20.0cm/20.0cm/9.0cm
(M)20.5cm/20.5cm/9.0cm
(L) 21.0cm/21.0cm/10.0cm
(XL)21.5cm/21.5cm/10.0cm

*Please note that these are our company's flat measurements, so there may be slight errors.
(US standard sizes)

Introducing a new rash guard top with a slightly looser silhouette than before!
It provides body protection with just the right amount of stretch and a longer length.

By wearing a rash guard, there is no friction between your skin and the life jacket.
UPF50+ sunscreen protects your skin from UV rays.
It is also said that the stretch function reduces fatigue.
The design mainly features a logo that is easy to coordinate.

■ Flat measurements (chest circumference/length)
M size: 106cm/68cm
L size: 110cm/70cm
XL size: 113cm/72cm
*Please allow for some error as measurements are taken by our staff.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] SEA-DOO
RXP-X 300
RXT-X 300
GTX 300 ALL
GTX 230 ALL
WAKE Pro 230
GTR 230(2019-2020)

Since the stock intake hoses are not strong enough, the hoses connecting the supercharger to the intercooler and from the intercooler to the throttle become deformed, creating resistance to smooth intake.

This exclusive silicone hose has high strength and prevents deformation. In addition, the 50mm large-diameter blow-off valve releases unnecessary pressure and protects the supercharger unit when the throttle is turned off .

This is a dispenser exclusively for the salt removal and salt damage protection agent "DESALT".

This dispenser makes your work easier.
Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.

[Note] DESALT concentrate is sold separately.
DESALT is used in PWC and boat engine washing to clean, purify and help prevent salt build-up and inhibit engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

It can be used on boats, trailers, cars, diving gear, fishing rods and other marine items, home windows and anything that comes into contact with salt water or sea spray.

• The original solution can be used more easily with the Desalt dispenser.
• You can also dilute it and use it to soak parts.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• Please purchase the original solution (2L or 5L) together and use it.

DESALT is a cleaning agent that removes salt and protects surfaces from salt damage .

When used to wash PWC and boat engines, it cleans, purifies and helps prevent salt build-up, inhibiting engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

• Using the Desalt dispenser (sold separately) makes the process even easier.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• It can also be diluted and used to soak parts in water.
  Form: Liquid (5000ml) Country of Origin: New Zealand

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

Note: Dispenser sold separately.

DESALT is a cleaning agent that removes salt and protects surfaces from salt damage .

When used to wash PWC and boat engines, it cleans, purifies and helps prevent salt build-up, inhibiting engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

• Using the Desalt dispenser (sold separately) makes the process even easier.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• It can also be diluted and used to soak parts in water.
  Form: Liquid (2000ml) Country of Origin: New Zealand

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

Note: Dispenser sold separately.

A waterproof and dustproof sacoche.
Made of durable PVC material, it can be used in a wide range of situations, including outdoor activities, marine sports, and travel.
The interior has a wide gusset and is well protected from water with a water-resistant zipper and Velcro.
You can carry small items such as smartphones, wallets, and towels without getting them wet.

Product Specifications
■ Compatible devices: Smartphones up to approximately 81(W) × 25(D) × 160(H)mm
■ Body size: Approximately 160(W) × 70(D) × 320(H)mm
■ Body weight: Approximately 87g (excluding accessories)
■ Waterproof performance: IP66
■ Material: PVC
■ Accessories: Shoulder strap ×1, Warranty card

[Precautions when using the waterproof case]
* Please be careful not to put sharp objects inside, as they may damage the product.

[Disclaimer]
Due to the delicate material of the product, returns or exchanges will not be accepted after opening. Please be aware of this in advance.

[About delivery]
* Single item orders will be delivered by Nekoposu. (Delivery date/time cannot be specified, cash on delivery not available)
* If there are other items ordered at the same time, the delivery method may differ depending on the purchase details and packing situation.

Jet Ski, Marine Jet, PWC, Personal Watercraft, Surfing, Diving, Bodyboarding, Wakeboarding, Wakesurfing, Kiteboarding, Flyboarding, SUP, Windsurfing, Kayaking, Canoeing, Snorkeling, Marine Sports, Boating, Trekking, Boarding, Fishing, Sea, River, Lake, Travel, Pool, Bath, Shower, Gym

Newly released in two cute aurora colors!
It has achieved the highest level of dustproof and waterproof performance, IPX8, and is also glow-in-the-dark, shining in dark places.
The included strap can be used two ways, around the neck or diagonally across the shoulder.
The strap has a two-point attachment, so it resists twisting and always stays facing the right way, which is great.
The strap length can also be adjusted at both ends.

Product Specifications
■Compatible size: Approx. 80(W) × 15(D) × 165(H) mm
■Body size: Approx. 121(W) × 15(D) × 222(H) mm
■Body weight: Approx. 45g *Excluding accessories
■Waterproof performance: IPX8
■Material: ABS/PVC
■Accessories: Shoulder strap ×1

Sparkling Aurora Colors
・Glow-in-the-dark material for peace of mind in dark places
・Highest waterproof rating IPX8
・Smooth touch operation and photography
・Included strap can be used in 2 ways
・Waterproof check sheet included

*This product is designed for simple waterproofing. Never use it underwater before checking the waterproofing, or for water sports or activities.
*Always perform a "waterproof check" before initial use and before each subsequent use. For details on how to perform the waterproof check, please read the instruction manual included with this product.
*For iPhones (7/8 series, SE (2nd/3rd gen)), the fingerprint authentication function cannot be used when the phone is in the waterproof case.
Therefore, please enable the "AssistiveTouch function" and set a home button on the screen before use.

[Precautions when using a waterproof case]
*Do not touch non-waterproof devices with wet hands.
*This product maintains its waterproofness only when it is securely sealed.
*Please be careful not to put sharp objects inside, as they may damage the product.

[Disclaimer]
Due to the delicate nature of the material, returns or exchanges cannot be accepted after opening. Thank you for your understanding.

[About delivery]
*Single item orders will be delivered by Nekoposu. (Delivery date/time cannot be specified, cash on delivery not available)
*If you order multiple items simultaneously, the delivery method may vary depending on the contents of your purchase and packaging status.

Jet ski, personal watercraft, water bike, surfing, diving, bodyboarding, wakeboarding, wakesurfing, kiteboarding, flyboarding, SUP, windsurfing, kayaking, canoeing, snorkeling, marine sports, boating, trekking, boarding, fishing, sea, river, lake, travel, pool, bath, gym

Floats on water! New waterproof case in nuanced colors now available!

This convenient, large-sized waterproof case allows you to insert your smartphone with its case still on.
Made from float material, it floats on water and boasts the highest dustproof and waterproof rating of IP68.
The included strap is a 2-way design that can be worn around the neck or diagonally across the shoulder.
The strap has two attachment points, so it won't twist and change the case's orientation. The strap length is also adjustable.

Product Specifications
■ Max compatible size: Approx. 90(W) x 15(D) x 180(H) mm
■ Main unit size: Approx. 138(W) x 15(D) x 235(H) mm
■ Main unit weight: Approx. 55g (excluding accessories)
■ Waterproof performance: IP68
■ Material: ABS/PVC
■ Accessories: Shoulder strap ×1

Fully waterproof and dustproof IP68, tested to 30m depth: Acquired international dustproof and waterproof standard "IP68"
It meets the criteria of "no ingress of dust (dust-tight)" and "no ingress of water when continuously submerged (submersible type)", has passed a 30m depth submersion test, and is equipped with IP68-compliant waterproof/dustproof functions.

One side is half transparent, allowing you to tap and flick your smartphone while it's inside.
When completely sealed, its structure allows it to float on water without sinking, so you can use it with peace of mind around water.
While inside the waterproof case, you can tap and flick, and even make calls.
You can check emails, watch videos, browse the web, etc., without the hassle of taking your smartphone out. It's also designed to be easy to unlock even with wet hands.

【Precautions when using the waterproof case】
※Do not touch devices that are not waterproof with wet hands.
※This product maintains its waterproofness only when securely sealed.
※Please be careful not to insert sharp objects, as they may damage the product.

【Disclaimer】
Due to the delicate nature of the product's material, we cannot accept returns or exchanges after opening. Please be aware of this in advance.

Jet ski, marine jet, personal watercraft, surfing, diving, bodyboarding, wakeboarding, wakesurfing, kiteboarding, flyboarding, SUP, windsurfing, kayaking, canoeing, snorkeling, marine sports, boating, trekking, board sports, fishing, ocean, river, lake, travel, pool, bath, bathing, gym

It has a gusseted shape that allows small items to be stored together. It can accommodate large smartphones up to 6.7 inches! The internal partition ensures the smartphone remains easy to use. Made from durable PVC material, it can be used in a wide range of situations, including outdoor activities, marine sports, and travel. The included strap can be used in two ways. You can store smartphones, wallets, electronic keys, and various other items without getting them wet. The gusseted bottom allows it to stand upright. Product Specifications ■ Maximum compatible size: Approx. 90 (W) x 15 (D) x 180 (H) mm ■ Main unit size: Approx. 160 (W) x 70 (D) x 320 (H) mm ■ Main unit weight: Approx. 58g (excluding accessories) ■ Waterproof performance: IPX8 ■ Material: ABS/PVC ■ Accessories: Shoulder strap x 1 [Precautions when using a waterproof case] * Do not touch non-waterproof devices with wet hands. * This product maintains its waterproofness only when it is securely sealed. * Please be careful not to put sharp objects inside, as they may damage the product. [Disclaimer] Due to the delicate nature of the product's material, returns or exchanges after opening cannot be accepted. Please be aware of this in advance. Jet ski, marine jet, personal watercraft, surfing, diving, bodyboarding, wakeboarding, wake surfing, kiteboarding, flyboarding, SUP, windsurfing, kayaking, canoeing, snorkeling, marine sports, boat, trekking, board, fishing, sea, river, lake, travel, pool, bath, bathing, gym

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

Drilling required.
[Traction force] C (750kg or less)
[Estimated installation time] Approximately 5 hours

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

benz slope

[Compatible car models] G550, G350, 463236, 463244, 463272 (Armor game)

[First year registration] H6.12~

*Screw holes tapped in 4 locations M10→M12

Traction force: B (500kg or less)
Estimated installation time: 4 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

Drilling required.
[Traction force] C (750kg or less)
[Estimated installation time] Approximately 5 hours

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

benz slope

[Compatible car models] G550, G350, 463236, 463244, 463272 (Armor game)

[First year registration] H6.12~

*Screw holes tapped in 4 locations M10→M12

Traction force: B (500kg or less)
Estimated installation time: 4 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

Cherokee

[Compatible car model] ABA-KK37

[First year registration] June 2008 to April 2013

Traction force: C (750kg or less)

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

benz slope

[Compatible car models] G550, G350, 463236, 463244, 463272 (Armor game)

[First year registration] H6.12~

*Screw holes tapped in 4 locations M10→M12

Traction force: B (500kg or less)
Estimated installation time: 4 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

Cherokee

[Compatible car model] ABA-KK37

[First year registration] June 2008 to April 2013

Traction force: C (750kg or less)

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

RAV4

[Compatible car model] MXAA54 *TRD aero compatible

[Traction force C (750kg or less)
[Estimated installation time] Approximately 3 hours

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

RAV4

[Compatible car model] MXAA54 *TRD aero compatible

[Traction force C (750kg or less)
[Estimated installation time] Approximately 3 hours

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

hiace van just low

[Compatible models] LH113V, 119V, 172V, 178V, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

hiace van

[Compatible models] LH113V, 119V, 172V, 178V, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

hiace van just low

[Compatible models] LH113V, 119V, 172V, 178V, etc.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SF5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with license plate embedded in bumper NG (H20.9~?)

[Compatible model] ABA-H58A

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Duke not allowed, type with license plate embedded in bumper NG (H20.9~?)
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.