Collection: Best Selling Products

SEA-DOO 4-stroke 1503 / 1630 ACE
OEM Part Number: 420851754

SGS Spark Plug Pipe
●For 1 cylinder
●An affordable aftermarket repair part with performance equivalent to genuine parts.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

■Bolt size AxBxC: 80x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

For 10-inch wide tires
Size: L845×W265mm

■Sales unit: 1 piece per side (2 pieces required for left/right replacement)

【Requests and notes when ordering】
*Please provide the following trailer information when ordering. (Model, year, chassis number)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*Please refer to the image "Requests when ordering" for more details.

【Delivery information】
●Cannot be combined…To prevent scratches and damage, shipping is for individual items only. Cannot be "bundled (combined)" with other products.
●Direct shipment…This product is shipped directly from the manufacturer, so "cash on delivery" and "bundled (combined)" are not possible.
●Limited payment methods…Bank transfer and credit card only (cash on delivery not possible)
●Shipping will be calculated per item [shipping cost × quantity].

SUZUKI JIMNY

[Compatible models] JB64W/74W

[Towing capacity] B (trailer gross vehicle weight less than 550kg)
[Ball mount] B-7
[UP/DOWN ] UP
[Installation difficulty] ☆
*Due to thin vehicle wiring, simultaneous purchase of a relay kit (SRX-142) is recommended. Installation while avoiding the license plate.

This hitch member is a combination of an oval-shaped, stylish steel hitch member manufactured by lost-wax (investment casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and removable pin are made of stainless steel, and the member part and mounting stays are baked-painted.
The ball mount also features an O-ring to reduce rattling noise.

[Half stainless steel / Combination hitch (CHC)]
*Main bar is steel, accessories (ball mount, hitch ball, removable pin) are stainless steel type*

[Set contents]
Stainless steel ball mount / Stainless steel hitch ball / Stainless steel removable pin / Steel mounting stay and bolts / Wiring socket mounting stay / Wiring kit

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

A large size bag that can store a complete set of clothing.

Top zipper length: 78cm
Height: 45cm
Gusset: 25cm

Genuine SUZUKI Engine Oil made by MOTUL
●SAE Viscosity: 10W-40
●API Classification: SL Class

Semi-synthetic oil developed for Suzuki 4-stroke outboard engines.
This oil has excellent oxidation stability and provides superior rust protection even under severe conditions.

【Compatible Models】 Estimated Engine Oil Capacity
DF2: 0.38L
DF5/5A/6A: 0.7L
DF8A/9.9A: 0.8L
DF9.9/9.9B/15/15A/20A: 1.0L
DF25(V2)/DF25A/30A: 1.5L
DF25/30 (3-cylinder): 3.0L
DF40/50: 2.2L
DF40A/50A/60A/60AV: 2.7L
DF60/70: 4.5L
DF70A/80A/90A: 4.0L
DF90/100/100A/115/115A/140/140A: 5.5L
DF150/150TG/175/175TG/200A/200AP/200/225/250/250AP/300/300AP: 8.0L

【Disclaimer】
*Part numbers for genuine products may change without prior notice.
*Due to part number changes, the part number displayed on the page may differ from the part number delivered. Thank you for your understanding.
99000-22B60-4T1

【Compatible Models】KAWASAKI
ULTRA310X / ULTRA310LX / ULTRA310SE / ULTRA310R (-2021)
ULTRA300X / ULTRA300LX
ULTRA260X / ULTRA260LX
ULTRA250X
ULTRA LX
*For 2022- ULTRA310LX/LX-S, "J2606-0041" is the compatible product, not this one.

●Genuine Kawasaki JETSKI hull cover
●Protects your valuable hull from UV rays and dirt.
●Equipped with ventilation functions on both sides for good airflow and reduced stuffiness.
●Not completely waterproof.
*Image for illustration purposes (actual shape may differ as images of other models are used)

J2606-0040BK Black【Sales Discontinued】
J2606-0040GR Green

Old Part Numbers J2606-0031 / J2606-0036

【Please Read Before Ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once an order is confirmed, we promptly place the order with the manufacturer. Therefore, cancellations or changes to order content due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

The long brim and flap provide the ultimate protection from UV rays, even in the strong summer sun.
The stretchy fabric fits any size child perfectly.
This is an amphibious summer cap.

■Material: 88% polyester, 12% polyurethane

■Size: FREE (head circumference 50-52cm)

*The red ribbon on top is not included.
*The rash guard worn is not included.

[Staff comments]
Made of rash guard material, it does not absorb water and does not become heavy even when wet.
It also protects the back of the neck, which is prone to sunburn, and protects children's delicate bare skin. If you pour water on it, the evaporative cooling effect will make it feel even cooler!
This is a convenient hat that can be worn outdoors in the strong sunlight at the beach or pool, as well as for everyday use.
The stretchy fabric fits snugly around your head and won't slip off.

Children, Kids, Elementary school students, Toddlers, Beach, River play, Water play, Glamping, Camping, Sunburn, UV care, Evaporative cooling, Cool cap hat with brim, chin strap, neck flap

A new, convenient item is now available that allows you to change bands and can be used in 2 ways: goggle mode and sunglass mode!

【SPEC】
・Polarized lenses
・UV cut
・JETPILOT logo jacquard band
・Lightweight, flexible sunglass arms: EVA
・Inner cushion foam

【Accessories】Storage case

This life jacket is made of soft wet suit material, gentle on children's delicate skin.
Compared to nylon types, it is thicker and offers superior protection.

■MATERIAL Chloroprene

■Applicable Height Sizes
　M (8-10): 110-120cm
　L (12-14): 120-130cm

■Actual Waist Measurement / Length
　M (8-10): 70cm / 43cm
　L (12-14): 78cm / 45cm

■US Coast Guard Approved
*Conforms to special statutory equipment for small vessels.
*When registering children's items as statutory equipment, please refer to the Japan Craft Inspection Organization's website.

【Compatible models】SEA-DOO
RXT-X300/230 (2018～)
GTX LIMITED 300 (2018~)
GTX 155/230(2018~)
WAKE PRO (2018~)

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body and the fiber parts.
High-quality domestic production from fabric to stitching.

Special Features
1. 【Tape】Colored tape is used to easily identify the front when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as reinforcement for the mirror section to prevent chafing.
3. 【Handle】The fabric around the handle is doubled for reinforcement.
4. 【Buckle】Securely fastens the watercraft with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the production lot.
* As this is a made-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-15B Black only

【Compatible Models】
★YAMAHA SJ(96～) only
★KAWASAKI 550SXi/650SX/750SX/750SXi

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the hull's fiber parts.
This is a high-quality cover, from fabric to stitching, all made in Japan.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Reinforcement】Non-woven fabric is used as reinforcement on the mirror parts to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Please Note】
※The color of the stitching, tape, and bands may vary depending on the time of arrival.
※As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Applicable models】YAMAHA
VX Series (~2014)
VX / 110DX / CRUISER / VXR* / VXS
*For the new VXR, part numbers [Y-5S-1: Silver, Y-5B-1: Black] are compatible.

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to sewing.

1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as backing in the mirror area to prevent chafing.
3. 【Handle】The handle area is double-layered for reinforcement.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*Due to made-to-order production, returns, exchanges, and cancellations are not possible after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Y-5B (Y-1) Black

【Compatible Models】SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-24)

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to stitching.

Special Features
1. 【Tape】 Colored tape is used to easily identify the front when covering.
2. 【Backing】 Non-woven fabric is used as backing for the mirror part to prevent rubbing.
3. 【Handle】 The handle part is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and band may vary depending on the production lot.
* As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-13B Black

【Compatible Models】KAWASAKI 800X-2

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to sewing.

Key Features
1. 【Tape】The tape is colored to make it easier to identify the front when putting on the cover.
2. 【Handle】The handle area is reinforced with double-layered fabric.
3. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Applicable models: YAMAHA
YAMAHA 4-stroke FX (excluding FX-SHO/FZR/FZS)/VX
(*) Cannot be used with FX-SHO/FXR/FXS

Guidance regarding genuine parts
---------------------------------------------------------------------
*As this product is a genuine part, cancellations or returns after order placement are not accepted.*
Please confirm the following items before placing your order.
1. Manufacturer
2. Model Name (Common name): Please check your ship inspection logbook (under "Subject" on the inside back cover) or the decal on the hull.
3. Year: The year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate attached to the side or rear of the hull or in the ship inspection logbook (under "Subject" on the inside back cover).
---------------------------------------------------------------------
● About the displayed prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please be aware of the above in advance.

Please read before ordering.
This product is a **manufacturer-ordered product (genuine part)**.
As we will promptly place an order with the manufacturer after your order is confirmed, cancellations or changes to order details due to customer convenience are not accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order with prior understanding.

SUZUKI Outboard 16510-87J02 Oil Filter

[Compatibility]
DF25(V2), DF25/30(3-cylinder), DF25A/30A
DF40/50, DF40A/50A/60A/60AV, DF60/70

[Note]
*Genuine part numbers may be changed without prior notice.
*Due to part number changes, the part number displayed on the page may differ from the part number delivered. Thank you for your understanding.
16510-87J00 → 16510-87J01 → 16510-87J02

[Fits] SUZUKI Outboard Motors DF8A/9.9A/9.9/15/9.9/15A/20A
SUZUKI Outboard Motor Oil Filter

[Disclaimer]
*Genuine parts are subject to part number changes without prior notice.
*Due to part number changes, the part number displayed on the page may differ from the part number delivered. Please be aware of this in advance.
16510-45H10

Applicable models: KAWASAKI 1100-1200/4-stroke
Purpose: Tool for holding the coupling

Genuine Parts Information
---------------------------------------------------------------------
*As this product is a genuine part, cancellations and returns are not accepted after ordering.*
Please be sure to confirm the following before placing your order.
1. Manufacturer
2. Model name (common name): Please confirm from the Ship Inspection Handbook (the "Subject" on the inside back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate attached to the side or rear of the hull, or in the Ship Inspection Handbook (the "Subject" on the inside back cover).
---------------------------------------------------------------------
Regarding Displayed Prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please be aware of the above in advance.

Please be sure to check before ordering.
This product is a **manufacturer-ordered product (genuine part)**.
As we promptly place orders with the manufacturer after your order is confirmed, cancellations and changes to order details are generally not accepted due to customer convenience.
Additionally, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery time as soon as it is confirmed.
Please place your order with prior understanding.

【Compatible models】KAWASAKI 4-stroke ALL models

【Regarding genuine parts】
---------------------------------------------------------------------
*As this is a genuine product, we cannot accept cancellations or returns after your order has been placed.*
Please be sure to confirm the following items before placing your order.
1. Manufacturer
2. Model name (common name): Please check from your vessel inspection logbook (the "Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN).
(Example) Hull identification number: KAW12345A607 → 2007 model year
The hull identification number (HIN) is stated on a plate attached to the side or rear of the hull, or in the vessel inspection logbook (the "Subject" inside the back cover).
---------------------------------------------------------------------
●Regarding displayed prices
1. Prices and specifications are subject to change without notice.
2. The listed price and actual selling price may differ due to changes in manufacturer part numbers, prices, etc. In such cases, we will contact you.
Thank you for your understanding in advance.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, as a general rule, we cannot accept cancellations or changes to order details due to customer convenience.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding in advance, and please place your order.

【Compatible models】
Yamaha FX1 700 1994-1995
Yamaha Wave Blaster 700 1993-1996
Yamaha Wave Blaster 760 1996-1997
Yamaha Exciter 220 1100 1996-1998

●OEM Part Number: 62E-44517-00-5B, 63M-44517-01-5B equivalent

■Sales unit: 1 piece
Essential for improving engine durability, and economically priced.

【Disclaimer】
Colors may vary depending on the production lot.
Please note that if you purchase multiple items, the colors may not match.

[Product Specifications]
■Ideal for carrying spare fuel! Since it is a plastic tank, there is no need to worry about rust, and it is lightweight and easy to carry.

■The included nozzle has an air intake vent, allowing you to pour fuel smoothly.

■Size: Approx. 265 x 250 x 135 mm
■Aperture: Φ40mm
■Material: HDPE (high density polyethylene)
Capacity: 5 liters

*The product is a hazardous materials transport container that complies with international recommendations (UN standards) regarding the international transportation of hazardous materials.
*Although this product is UN certified, it may not be possible to fill it up at gas stations, including self-service stations.
*This product cannot be refueled and transported in a passenger vehicle for the purpose of using it as automobile fuel. (*1)
*This product cannot be used for refueling for storage purposes (*2).

(*1) Notification prescribing details of technical standards for the control of dangerous goods (Article 68-4), Regulations on the Control of Hazardous Materials (Article 43-2)
(*2) Fueling for storage purposes refers to fueling for stockpiling. This does not apply if the purpose is to use it immediately. There is no clear definition of the time between refueling and use.

【Compatible Models】SEA-DOO GTX/RXT Series (2010-2017) *Models without suspension
GTX 155/215／Limited
GTX Limited
RXT 260
RXT-X260 / RXT-X300RS
*For iS-equipped GTX series (2017), GTX-S, please refer to part number: 295100718
*For iS-equipped GTX series (2009-2016), please refer to part number: 280000460
*For RXT-Xas (with suspension), please refer to part number: 280000586

●Genuine SEA-DOO PWC cover.
●Designed for a perfect fit and made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an取り寄せ (order-on-demand) product.*
*As this is a genuine product, cancellations and returns are not accepted after your order has been placed.*
--------------------------------------------------------------------------
●Please ensure you check the following points before selecting a product and placing an order.
1. Please confirm the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About Displayed Prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price.
In such cases, we will contact you before shipping. Thank you for your understanding.

【Please Read Before Ordering】
This product is a **manufacturer order-on-demand item (genuine part)**.
As we promptly place orders with the manufacturer upon confirmation of your order, cancellations or changes to your order content due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these points in advance.

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

For SEA-DOO 4-stroke 155mm pump (for 185/155/130 horsepower)
[Compatible] SEA-DOO pump diameter 155mm
[Representative models] GTX155('04-) / GTX SC 185 / WAKE155 / GTI155 / GTI130

●Genuine part number (OEM): 267000419 (old part number: 267000104)

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

[Compatible models] SEADOO Spark
●Genuine part number (OEM): 267000925, etc.

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

SEA-DOO 4-stroke 1503 (excluding 2018 and later models, 300 and SPARK)
●Genuine part number (OEM): 296000307

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Compatible Models]
YAMAHA GP1800 (2017-2018) / GP1800R SVHO (2019-)

The intake grate is the part that acts as the inlet for the water flow that sends water to the pump case, and it has the effect of improving contact with the water surface.

【Compatible Models】YAMAHA
FX SVHO (2014-2022)
FX SHO/HO (2012-2022)

This part serves as the water inlet that feeds water to the pump,
and it has the effect of improving grip on the water's surface.

Intake Gate

●Genuine rubber boot (SEALING CUP) for SEA-DOO 4-stroke ignition coil.

※Cannot be installed on ROTAX 1630 ACE, ROTAX 1500 HO ACE, ROTAX 900 HO ACE

【Please confirm before ordering】
This product is **a manufacturer-ordered item (genuine part)**.
As we promptly place orders with the manufacturer after your order is confirmed, cancellations or changes to your order are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will notify you of the delivery time as soon as it is confirmed.
We kindly ask for your understanding before placing your order.

●Narrow Type: Uses LEDs with a narrow illumination range.
●Mounting Hole Pitch: 50mm
●Sales Unit: One side (left/right distinction) *Please select left or right when looking at the trailer from behind.

【Water-Resistant Specification】
Designed to withstand water from above, such as rain or car washing.
Please be careful not to immerse the light portion in water, such as by putting the trailer into the water. Water may enter the lamp and cause damage.

【Note】There are two types of combination lamps: "Wide" and "Narrow." Although they look similar, please note that their illumination ranges are different, and the shapes of their plug-in ports are also different.
Customers wishing to confirm compatibility should inquire via the inquiry form in advance or provide the trailer model and chassis number when ordering.

●A trailer jack made of aluminum with a novel design.

●Wide single wheel. Comes with wheel lock.

■Mounting frame: up to 76.2 x 101.6mm
■Material: Aluminum
■Maximum load: 725kg
■Stroke: 250mm
■Wheel diameter: 178mm

[120 size]

This suit, which pursues cost performance, is perfect for fun riding.
This is a slightly thinner 2mm wetsuit that can be worn during the summer season.
[Sleeveless long johns + front zip jacket 2-piece suit]

(M) Height 173-180cm Chest 94-101cm Weight 64-77kg
(L) Height 178-185cm Chest 101-104cm Weight 77-86kg
(XL) Height 180-188cm Chest 104-109cm Weight 82-90kg

[Caution] Special offer, non-returnable item