Collection: Best-selling products

[Marine coat with life jacket that is legally required]

This riding wear has a flotation function as a life jacket with buoyancy elements on the sleeves, chest, back, and inner layer.
This jumper style is windproof and cold resistant and can be easily worn over a wetsuit.

●Equipped with a highly durable front zipper ●Equipped with Velcro closures on the cuffs and neck to prevent wind from entering

■Applicable chest size
S:89-94cm
M:94-100cm
L:100-104cm
XL:104-109cm

■Material: Made of 200 denier nylon ■US Coast Guard certified product (PWC limited JCI legal equipment compatible)

The body is made of comfortable wet material, and the neck, hand, and foot seals are made of neoprene with less constriction than conventional dry suits, eliminating the hassle of traditional dry suits.
This is winter wear suitable for runabout models.

Usually, wetsuits are custom-made to fit tightly to the body,
and use 3-5mm neoprene fabric to enhance warmth.
Wet dry suits, on the other hand, maintain the style of a fabric dry suit with a loose full-body fit while also enhancing warmth.
Of course, they can be adjusted with innerwear, and the synergy with the neoprene's own warmth provides both thermal protection and mobility.
The deterioration of latex rubber seal rubber, which was a weakness of fabric dry suits,
is not a concern with wet dry neoprene waterproof seals. (See notes)

■Height suitability
S size: 150-160cm
M size: 160-170cm
L size: 175-180cm
XL size: 180-185cm

■MATERIAL: Chloroprene
[Please note that due to the nature of the product, returns and exchanges are not accepted.]

Jet Ski Wakeboard

The body is made of comfortable wet material, and the seals on the neck, hands, and feet are made of neoprene that doesn't feel tight, so it eliminates the constricted feeling of conventional dry suits.
This winter wear is suitable for runabout models with minimal water ingress.
Typically, wetsuits are custom-made to fit tightly to the body,
and use 3-5mm neoprene fabric to enhance warmth.
Wet-dry suits, while enhancing warmth, maintain a full-body loose fit, preserving the style of fabric dry suits.
Of course, adjustments can be made with innerwear, and the synergistic effect with the inherent thermal insulation of neoprene provides both warmth and mobility.

(See Notes)
■Suitable Height :
M size 160-170cm
ML size 170-175cm
L size 175-180cm
XL size 180-185cm

■MATERIAL: Chloroprene
*Due to the nature of the product, returns and exchanges are not accepted.

"Create a beautiful body line"
Women's wetsuit featuring an elegant lace pattern. The cute and stylish design is a perfect match for swimwear and is ideal for the beach and marine sports.

Features

• 2-piece set of topper jacket & long pants: The three-dimensional ACT structure and loose silhouette flexibly adapt to aggressive movements. It ensures comfort even after long periods of wear and minimizes strain.
• Flat seam stitching: The seams do not irritate the skin, providing a comfortable fit.
• Lightweight & highly elastic: Made with super light foam material, it achieves a lightweight and highly elastic fit.
• Convenient zipper: Equipped with zippers at the ankles as standard for easy and smooth donning and doffing.
• 2-way specification: The waist can be worn as a low-rise. You can freely style it to suit your preferences.
• Breathable & quick-drying: The sides of the jacket are made of air-plane material, which is excellent for breathability and drainage, supporting a comfortable wearing experience.

Material

• Material: 2mm Neoprene
• Jacket: ACT structure, front zipper specification
• Long pants: ACT structure, ankle zippers

Suitable sizes (all in cm)

*Sizes are approximate. The correct size may vary depending on individual physique and preferred fit.

Personal Watercraft (PWC)Jet Ski, Marine Jet, Kawasaki, YAMAHA, SEADOO, Wetsuit, Jacket, Long John, Women's, Female

This is a full-suit type dry suit that is waterproof and heat-retaining.
The body is made of wet material that emphasizes comfort, and the neck, hand, and foot shields are made of neoprene that feels less constricting, so you don't have the hassle of traditional dry suits.

■Specifications Front entry zipper Wide opening from arms to chest for easy on and off! The back is stress-free and easy to move.

YKK Aqua Seal Zipper The new simple waterproof zipper uses a zipper that is lighter and more flexible than conventional zippers.It has excellent flexibility and operability, making it easy to put on and take off the dry suit, and the slider movement is light.

Wristband (wrist can be adjusted with the included wristband)

Chloroprene seal (reinforced with Melco tape, so it can be cut to size)

■Applicable height: M size 160-170cm
ML size 170-175cm
L size 175-180cm
XL size 180-185cm

■Color: Black ■Material: 3mm Chloroprene, Chloroprene Seal, YKK Aqua Seal ■Specifications: Front entry zipper

Please note that due to the nature of the product, we cannot accept returns or exchanges.

■Back zipper and ankle seal specifications

Adopts a material that combines excellent waterproof and windproof properties with smooth moisture permeability. The surface of the fabric prevents water from entering, and also allows moisture from perspiration to escape, improving comfort.
This dry suit is not only lightweight but also uses the best know-how and materials.

1.The latex on the neck and wrists is adjustable and fits tightly to prevent water from entering.
2. Suspenders: Prevents the inseam from getting too tight, so you don't have to worry about your lower body shifting during intense movements.
3. Comes with a convenient storage bag that is compact and easy to carry.

■Applicable height S size: Height 150-160cm
M size: Height 160-170cm
L size: Height 170-180cm
XL size: height 175-185cm

■MATERIAL/Nylon Ox Dinner Dry Rider Super Latex

[Notes on Dry Sweets]
The material itself does not retain heat, so the innerwear needs to be adjusted according to the outside and water temperatures.
If you don't need heat retention, we recommend wearing absorbent innerwear to prevent sweat.
Also, please cut the latex for the neck, wrist, and ankle parts according to your body shape.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

This is an essential item for sunburn prevention that thoroughly protects children's skin, which has less melanin pigment than adults and is therefore vulnerable to harmful UV rays.
The soft thread used in the stitching prevents the garment from rubbing and causing pain even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.
It's sure to be a big hit at the beach, the pool, or playing in the river.

For customers who will be using it for marine sports, we recommend a fitted size, just like swimsuits.

[Applicable size]
100: 90-110cm
120: 110-130cm
140: 130-150cm
150: 140-160cm

[Actual measurements when laid flat/Chest circumference, Hem circumference, Total length]
120cm/58cm, 54cm, 45cm
140cm/66cm, 62cm, 49cm
*Please note that these measurements were taken by our staff while the item was laid flat, so there may be some margin of error.

*Returns and exchanges are not accepted for special price items.

This is the Moby's brand's top-of-the-line model, fully equipped with features such as a front zipper that allows you to put it on and take it off by yourself, an integrated sock design that is a great ally in keeping you warm, and a small zipper for men's genitals.

■ Color: Black/Gray

■ Suitable height: M (165-168cm) L (170-175cm) XL (175-180cm)

■Material: High-performance breathable waterproof material "VAPOR PRO" & abrasion-resistant material "600D"

■Features
TIZIP waterproof zipper with waterproof seal
CR neck and wrist stickers,
2 pockets TPR patch Adjustable cuffs Dynamic panel design

■Specifications
Neck: Chloroprene Wrist: Chloroprene Socks: Latex

Features
1. Chest zipper for easy on and off by yourself
2. The fabric is made of breathable and waterproof material, VAPOR PRO.
3. Waterproof sealing keeps it from getting wet
4. "ACT" motion pattern technology makes it easy to move
5. The knees are made of urethane knee pads, and the hips are made of wear-resistant material.
6. Pockets on sleeves and chest (pockets are not waterproof)
7. Small zipper for easy access to men's restroom

[Notes on dry suits]
The material itself does not have any heat retention properties, so you will need to adjust your innerwear according to the outside air and water temperature.
If you don't need warmth, we recommend wearing a water-absorbent inner layer to protect against sweat. The nylon lining is specially coated, so if the inner fabric is scratched by hard fabrics like denim or metal fittings like key chains, the waterproofing may be reduced, so please be careful when putting on the inner layer. Also, since the material is nylon, it is vulnerable to heat, so please avoid bonfires, etc.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

This 1.5mm men's full suit can be used all year round!

Suitable for all water sports including surfing, diving, wakeboarding, flyboarding, snorkeling, SUP, kayaking, etc.
It is lightweight and compact, making it ideal for travel.
Thin, easy-to-wear wetsuits are recommended for first-time swimmers.
This wetsuit will keep you in comfortable conditions at all times.

[Compact storage] Made of 1.5mm chloroprene, which is thinner than conventional diving or surfing wetsuits, it is approximately half the weight!

[Lightweight and easy to carry] The material does not feel oppressive like traditional wetsuits and does not wrinkle easily even when folded.

[Protects from injury] The chloroprene rubber covering the entire body acts as a cushion to protect the skin from injury.

[Keeps body temperature] Although it is thin, it is made of the same chloroprene material as diving and surfing wetsuits, so its excellent heat retention keeps you comfortable at all times.

[Sun protection] Protects your skin from strong sunlight and harmful UV rays.

[Supports muscles] The new material "SOFLEX" with excellent elasticity is used all over the body, so it is easy to put on and take off! The optimal stretch provides accurate support for muscles all over the body.

■ Thickness 1.5mm
■Material: Chloroprene ■Sizes (Men's): M, ML, MLB, L

Not only does it keep you warm, it also protects your body from UV rays and traumatic jellyfish.
The back zipper design keeps the front of the body neat. The zipper is made of rust-proof plastic and closes flat. The long tape ribbon attached to the puller is useful when putting on and taking off the jacket, so please do not remove it.

[Storage] Wash as soon as you get out of the ocean. Do not use hot water! Dry on a sturdy, thick hanger, avoiding direct sunlight! A well-ventilated shady area is best! Store by hanging to avoid wrinkles!

This is a special life jacket designed for your child's safety.
In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

There are three safety buckles, two on the torso and one on the crotch belt, to prevent the life jacket from loosening or floating around the shoulders due to the influence of water currents. Available in sizes S to L, please choose the size that best suits your child. We recommend choosing the right size as a safety item.

■ Suitable height size M: 120-140cm
L:130-150cm
■MATERIAL: Reflective tape/Rescue whistle included

【Note】
This is a special life jacket designed for your child's safety.
In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

There are three safety buckles, two on the torso and one on the crotch belt, to prevent the life jacket from loosening or floating around the shoulders due to the influence of water currents. Available in sizes S to L, please choose the size that best suits your child. We recommend choosing the right size as a safety item.

■ Suitable height size
S: 110-130cm
M:120-140cm
L: 130-150cm
■MATERIAL: Reflective tape/Rescue whistle included

[Caution] Not compatible with legal equipment for small boat inspections. This product is a swimming aid and should always be used under parental supervision.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, beat board, children, toddlers, infants
Kids Junior Marine Sports Activities WATERSPORTS Boat Yacht Kayak SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest

These board shorts are made of 4-way stretch fabric that stretches in all four directions.
They provide a comfortable fit and allow for all kinds of movement.
The color-block stripes add a stylish touch to the simple colors.

◆Material: 89% Polyester, 11% Polyurethane

◆Size (Total Length / Hip / Waist / Hem Width) cm
28 inches: 48 / 98 / 74 / 26
30 inches: 48 / 100 / 78 / 26
32 inches: 51 / 104 / 82 / 27
34 inches: 51 / 108 / 86 / 27
*Measurements taken flat
*Please note that there may be slight variations depending on the design.

Chain Brake Assy
ST-089-42 Mounting Bolt42×100mm
ST-089-47 Mounting Bolt47×100mm
ST-089-52 Mounting Bolt52×100mm

[Ordered products]

■Wooden bank ■Total length: 1,850mm

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Ball mount with O-ring (SRX-071) to reduce rattling noise during towing
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Due to individual differences, processing may be required due to misalignment of hole positions.

【Notes on ordering】
*Please provide the "car model" so that the class can be stamped.
*Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
SOREX ball mounts are available in matte (SRX-123), mirror (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Types different from your existing mount may not be usable. Please be careful.

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

Ensures stability when parked.

■SRX-117-1 For NF-1/NF-E
■SRX-117-2 For boat trailers

【Requests and Precautions When Ordering】
*When ordering, please provide the "trailer model and installation position at time of order."
*This information will be used to confirm compatibility with the manufacturer when arranging the product.

[Requests and Precautions When Ordering]
*Please provide the following trailer information when ordering: (model, year, VIN)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

[Shipping Information]
●Cannot be combined with other items...To prevent scratches and damage, this item will be shipped individually. Cannot be combined with other items in one package.
●Direct shipment product...This product is shipped directly from the manufacturer, so "cash on delivery" and "combined packaging" are not possible.
●Limited payment methods...Bank transfer or credit card only (cash on delivery not accepted)
●Shipping will be calculated as [shipping cost x quantity] per item.

[Delivery]
Shipping costs to Okinawa Prefecture will be estimated separately each time.

Stainless steel ball mount with O-ring (SRX-071) to reduce rattling noise during towing.
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Processing may be required due to misalignment of hole positions caused by individual differences.

【Precautions when ordering】
*Please provide your "car model" so that we can engrave the class.
*Cancellations, changes, and returns will not be accepted if the model confirmation result is not a mismatch.

【Information】
Solex ball mounts are available in matte (SRX-123), mirror finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

Steel Ball Mount
■Shaft Diameter: φ19mm
■For SOREX Square Type (SX3002) Hitch Members Only

※Hitch ball and quick-release pin are not included.
※Processing may be required due to misalignment of hole positions caused by individual differences.

【Notes on Ordering】
※Please provide your "vehicle model" for grade stamping.
※Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
Sorex ball mounts are available in matte finish (SRX-123), polished finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

■Lineup
SRX-016-B1 45x75 for Side Frame
SRX-016-B2 75x75 for Tongs
SRX-016-B3 for Wide

*10-inch wide tires
are mounted vertically to the side frame using the wide bracket (SRX-016-B3).

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

【Compatible models】KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035W-GR Green
SE-101035W-RD Red

・NEW-WIDE (The base is 8mm wider than conventional models, improving running stability!)
・The angle of the side fins can be adjusted steplessly from 0 to -12 degrees relative to the lower edge of the sponson plate.
・The protrusion amount of the side fins is 25mm from the sponson plate surface.
・The sponson plate with side fins has its rear end cut, reducing the protrusion amount.
・The mounting position of the sponson plate can be selected from 4 positions: up to 24mm in the front-back direction and up to 11mm in the up-down direction, similar to conventional models.
・The flap at the rear end of the base plate can also be adjusted steplessly from 0 to -14 degrees, similar to conventional models.
Guide lines are engraved, making it easy to align the angles on both sides.

【Compatible models】 YAMAHA FZR / FZS

【1】SE-027020 For STD standard handlebars (STD bar Φ22.4)
【2】SE-027020F For FAT fat handlebars (FAT bar Φ28.6)

● Developed in collaboration with Krismackle Gauge!
● The handlebar position is set as low as possible to suit racing conditions.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRT1008: Outer diameter 8 x 10 x 10mm / Inner diameter 5 x 7 x 7mm
NHRT1210: Outer diameter 10 x 12 x 12mm / Inner diameter 7 x 8 x 8mm
NHRT1412: Outer diameter 12 x 14 x 14mm / Inner diameter 8 x 10 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRE0806: Outer diameter 6 x 8mm / Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm / Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm / Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14mm / Inner diameter 8 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Select a size
NHRC0806: Outer diameter 6x8mm / Inner diameter 4x5mm
NHRC1008: Outer diameter 8x10mm / Inner diameter 5x7mm
NHRC1210: Outer diameter 10x12mm / Inner diameter 7x8mm
NHRC1412: Outer diameter 12x14mm / Inner diameter 8x10mm

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

●This kit converts a 2-wheel launcher to a 4-wheel type.

*However, it cannot be attached to the "J-130SX Single Compact".
*Processing work such as cutting to length is required.

*Please note that the type differs depending on the model.
★JL222: J-130/J-1300/J-1300X *Cannot be attached to J-130SX
★JL223: J-1480/J1480X

【Product Information】
●To prevent scratches and damage, this product is shipped individually and cannot be combined with other items.
●Due to direct manufacturer shipping, "cash on delivery" and "combined packaging" are not possible.

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

[1: 97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2: 97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3: 97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4: 97-4339] 3/8×1/2×1/2 Outer diameter 11mm・14mm Inner diameter 6mm・8.5mm.

Shape: T-shape
Used when changing the routing by installing it between cooling hoses, or when establishing a bypass line.

Parts PWC personal watercraft engine parts jetski jet ski

Colored Plug Cap
●Quantity: 1 piece

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

●Teardrop-shaped air fender.
●Thick-walled with reinforced ribbed holes for rope attachment, making it durable and suitable for use as a course buoy when inverted.
●Easily inflatable with an air compressor or air gun.

【Product Specifications】
■Size: Diameter / Overall Length / Eye Diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm / 590mm / 25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【Please Note】
Air inflation nozzle is not included.
※If you require an air inflation nozzle, please purchase the separately sold item [Part No.: 97561].
※Products are delivered deflated.

・Material: Steel
・Plate thickness: 2.0mm
・Product details: Plate only (screws etc. not included)

Size: Please check A/B/C/D along with the image.
●L-shaped / Manufacturer: 0103-01 ■A: 60 /B: 95/C: 50/D: 35mm
●L-shaped long / Manufacturer: 0103-04 ■A: 60 /B: 95/C: 50/D: 90mm
●Straight* / Manufacturer: 0103-03 ■A: 115/B: 95/C: 50/D: 0mm
*Straight is a flat plate without bends

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Please use compatible main jets and slow jets for CV and CDCV carburetors.
■WSM products
*Some products may not have the number stamped on them.
*Due to the material, some discoloration that does not affect use may be observed.

006-7080

006-7110　110
006-7115　115
006-7120　120
006-7125　125
006-7128　128
006-7130　130
006-7132　132
006-7135　135
006-7138　138
006-7140　140
006-7142　142
006-7145　145
006-7148　148
006-7150　150
006-7152　152
006-7155　155
006-7158　158
006-7160　160
006-7162　162
006-7165　165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fittings used when removing the carburetor choke shaft.

[For KEIHIN]
006-538 Primer Inlet
006-539 Blind Cap

This is a cap to be installed when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

【Compatibility】 MIKUNI SBN Carburetor
006-438 for SBN38mm
006-444 for SBN44mm
006-446 for SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetors.
●Kit includes: shaft, butterfly, E-clip, seal, bushing, nylon washer

Better value than genuine parts!!

Sea-Doo Driveshaft Carbon Ring
【003-110-01】For 22mm driveshaft
●Genuine part number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., S.C., Wake

-------------
【003-110-02】For 27mm driveshaft
●Genuine part number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC