Collection: bestseller

Drain Plug

●OEM Part Number: 292002022

●This is an aftermarket replacement part that offers performance equivalent to OEM parts at a lower cost.

SEA-DOO 4 stroke
●Genuine parts (OEM: 420256919

●SGS Oil Pressure Switch ●This is an inexpensive aftermarket repair part with performance equivalent to the genuine part.

[Applicable model] KAWASAKI Kawasaki
ULTRA130 / ULTRA150

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*As this is a made-to-order item, it will take approximately one week. No returns or exchanges or cancellations

【 SEADOO 】 SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019-2025)

● Deck mats for SEADOO, newly released by UNLIMITED.

● In addition to excellent cushioning from a two-layer mat structure,
designed with the latest laser processing technology,
these durable mats eliminate surface tension for smooth deck drainage
and provide high grip even when wet.

● The double-sided tape used is not conventional 3M tape,
but PSA2, newly developed based on 3M 9786, which offers superior resistance to wrinkles, durability, and adhesion.

● Double-sided tape included

【Disclaimer】
Due to the nature of the product material and color, certain colors (green, orange, red, pink, yellow)
may fade over time or with use.
Please note that fading and discoloration are not covered by warranty.

【Regarding "Backorder/Pre-order" items】
These items will be produced upon order by the manufacturer.
Please note that changes or cancellations after ordering are not possible due to custom production.
Please allow approximately 2 to 2.5 months for backordered items.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Weather resistance that resists deformation, discoloration, deterioration, etc.

●Capacity: 4.2 gallons (16L)

●Roto mold cooler box with excellent rigidity and durability

●High cold retention performance with high quality insulation foam

●Equipped with seawater LinQ hardware as standard

OIL SEAL

Performance equivalent to SEA-DOO genuine part number (OEM): 93200089 etc.

SEAL

Performance equivalent to SEA-DOO genuine part number (OEM): 271002071 etc.

●Seal set for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The locations used are #1130 and #1110 in the third photo.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats of 15 to 19 feet.

●Opening diameter: 1.5m

●Tow rope length: 9m

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats up to 15 feet.

●Opening diameter: 1m

●Tow rope length: 8m

A stainless steel bracket for fixing navigation lights to pipes, etc.
Made of 316 stainless steel material that is resistant to rust and corrosion.

■Mounting part diameter: 90mm
■For 25mm diameter pipe
■Material: Stainless steel (SUS316/lost wax casting)

Navigation light mast made by Koito Seisakusho Co., Ltd.
■NO.55221, NO.95973…Open deck mast
■NO.95973…Japanese ship mast
This is the same as the standard equipment above.

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

■Rod diameter: 20-34mm compatible
■It's very convenient to be able to easily swap rods if you set this up on another rod in advance.
■This is a clamp for holding rods for Boat Power Holder Sokkou.

-Size: width 165 x height 100 x (base 76 x 76mm)
●Good because it's made of rubber so it won't scratch the hull!

■Set of 2
・Easy-to-attach and detach SEA-DOO genuine fenders
・Highly visible fluorescent orange body

When using these Snap-in Fenders,
the dedicated installation kit must first be installed on the hull. (Not required for SPARK)
●iBR models before 2017: Snap-In Fenders Installation Kit (Part No: 295100550)
●RXT, RXT-X, GTX and WAKE Pro (2018): Snap-In Fenders Installation Kit (Part No: 295100729)

【Please confirm before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we immediately place the order with the manufacturer, so cancellations or changes to the order content are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

-Material: Steel (black paint)

-Mounting hole size: 13-14.8cm x 13-14.8cm

■Roller diameter (A): 75.6mm
■Width (B): 99.0mm
■Shaft diameter (C): 16.0mm

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 25Ф pipe

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 1" x 14 screw threads

●Made of stainless steel

[Compatibility] SEA-DOO RXT, RXT-X, GTX and WAKE Pro (2018)

■2 pieces/set
※This is for one side. If you need 4 places (left and right), you will need 2 sets.

This is a necessary part for installing SEA-DOO genuine fenders (Part No.: 295100418).
Snap-In Fenders Installation Kit

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience will not be accepted in principle.
Also, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging this in advance.

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

●This tool is used to crimp bands on fuel hoses and engine boots.

[Guidance Regarding Genuine Parts]
---------------------------------------------------------------------
※As this product is a genuine part, cancellations and returns after ordering are not accepted.※
Please be sure to confirm the following items before ordering.
1. Manufacturer
2. Model name (common name): Please confirm from the marine inspection handbook (under "Subject" on the inside of the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate affixed to the side or rear of the hull or in the marine inspection handbook ("Subject" on the inside of the back cover).
---------------------------------------------------------------------
●About Displayed Prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. We will contact you in such cases.
Please be aware of the above in advance.

[Please Read Before Ordering]
This product is a **manufacturer-ordered item (genuine part)**.
As we promptly place orders with the manufacturer after your order is confirmed, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

SEA-DOO Genuine Wear Ring 159mm

【Compatible】SEA-DOO 260/255/215
GENUINE WEAR RING

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, we generally cannot accept cancellations or changes to order details due to customer convenience.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please understand this in advance before placing your order.

■Boat base attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Dimensions: 60 x 101 x thickness 22mm

■Material: SUS316

*Mounting bolts are not included

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 1" x 14 screw threads

●Made of stainless steel

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to the left and right to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 123x length 20x height 26x rope opening width 14x mounting hole distance 85mm

●SEA-DOO Genuine Wear Ring 155mm

【Compatibility】SEA-DOO pump diameter 155.5
【Representative Models】GTX 4-TEC (2002-03) / 951 models

【Please confirm before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Due to the prompt ordering from the manufacturer after order confirmation, cancellations or changes to order contents due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

[Compatibility] SEADOO RXT, RXT-X, GTX, and WAKE Pro (2018)

Upgrade hardware kit essential for using the LinQ TUNNEL BAG (Part No.: 860201740) in saltwater.
LinQ hardware kit includes highly corrosion-resistant stainless steel parts.
Easy and quick installation.

*Standard equipment for LinQ Cooler boxes.

[Please read before ordering]
This product is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, it is immediately placed with the manufacturer; therefore, cancellations or changes to the order are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●Can be installed on either flat or side surfaces.

●For 1" x 14 screw threads

●Made of stainless steel

【Compatibility】SEADOO 800/951 engine
●Support tool used to remove flywheel bolts.

【Information regarding genuine parts】
---------------------------------------------------------------------
*As this product is a genuine part, cancellations and returns after ordering are not accepted.*
Please confirm the following before ordering.
1. Manufacturer
2. Model name (common name): Please check from the vessel inspection certificate (under "Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is listed on a plate affixed to the side or rear of the hull or in the vessel inspection certificate (under "Subject" inside the back cover).
---------------------------------------------------------------------
●About displayed prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please be aware of the above in advance.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Because orders are placed with the manufacturer immediately after your order is confirmed, cancellations or changes to order content due to customer reasons are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will notify you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

Rail attachment for Boat Power Holder Sokko

■ Compatible with 19-32mm rails
■ Very convenient, no construction required
■ Used when installing Boat Power Holders.
Please use for mounting REGAR Boat Power Holder series, Boat Base series, etc. to the boat.

■Long arm, sturdy system, and the pinnacle of high-performance rod holders.

■If you set the quick clamp on another rod in advance, it is very convenient as you can easily change the rod.

■A best-selling, sturdy and easy-to-use rod holder that can also be used for outrigger fishing.

■It can be easily installed on the deck with 4 screws, so there is no need to worry about water getting into the boat.

■The angle and direction can be adjusted with the knob.

■Made of stainless steel

■Mounting base: 70×120mm・Pipe inner diameter: 40.4φ

●Genuine parts (OEM) part number: 292002022

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

■MAX TRAILER triangle reflector

■Size: 160mm on one side (with bolts)

■Upper and lower mounting holes

■Quantity: 1 piece

●A retractable stand bar to prevent falls and damage to the license plate when washing the car without connecting the trailer to the car or maintaining the jet.

●Equipped with rubber that prevents rattling and chattering noises when running, making it extremely quiet.

■Material: Steel plating
■Mounting plate and bolt set included
*Maximum 50cm

Tire & Base Only

■For TIGHTJAPAN Stopper Jack (0702-00, 0702-06)
■Material: Steel
■Wheel diameter: 150mm, Stroke length: 280mm

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Stainless steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Made of steel★Black painted
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material Tower: Stainless steel Winch: Steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

*If you are looking for stainless steel mounting bolts, please use [Product number: 0908-01 (sold separately)].

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●Tight Japan genuine product.

■Material: Aluminum

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-80
●Total weight: approx. 1.7kg
●Drug amount: 0.8kg
●Protection volume: 4 cubic meters
- Total height: approx. 265 mm, total width: approx. 97 mm, depth: approx. 102 mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 4 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4299
●Validity period: 6 years

*Includes recycling fee.

[Product specifications]
■Material: Plastic resin
■Size: Width 162x Height 42x Depth 65mm

●Resin handle that can also be used as a step.
●Fix to the transom etc. with screws, etc.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-150
●Total weight: approx. 4kg
●Drug amount: 1.5kg
●Protection volume: 8 cubic meters
- Overall height: approx. 475mm, overall width: approx. 110mm, depth: approx. 107mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 6 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport model No. 4142
●Validity period: 6 years

【please note】
*Recycling sticker is not attached.

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 575 x Width 355 x Height 330mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

[Product Specifications]
■Ideal for carrying spare fuel! Since it is a plastic tank, there is no need to worry about rust, and it is lightweight and easy to carry.

■The included nozzle has an air intake vent, allowing you to pour fuel smoothly.

■Size: Approx. 265 x 250 x 135 mm
■Aperture: Φ40mm
■Material: HDPE (high density polyethylene)
Capacity: 5 liters

*The product is a hazardous materials transport container that complies with international recommendations (UN standards) regarding the international transportation of hazardous materials.
*Although this product is UN certified, it may not be possible to fill it up at gas stations, including self-service stations.
*This product cannot be refueled and transported in a passenger vehicle for the purpose of using it as automobile fuel. (*1)
*This product cannot be used for refueling for storage purposes (*2).

(*1) Notification prescribing details of technical standards for the control of dangerous goods (Article 68-4), Regulations on the Control of Hazardous Materials (Article 43-2)
(*2) Fueling for storage purposes refers to fueling for stockpiling. This does not apply if the purpose is to use it immediately. There is no clear definition of the time between refueling and use.

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 610 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

●An hour meter that detects the ignition signal of the gasoline engine and measures the cumulative operating time of the engine.
●Measurements can be made by simply wrapping the included antenna lead wire around the spark plug cord.
●With reset function to return the count to 0

【Product details】
*Cannot be used with diesel engines and direct ignition types.
■Dimensions: L30 x W30 x H15mm
■Body weight: 15g
■Accessories: Antenna lead wire (50cm)
■Daily waterproof specifications
■Measurement method: Pulse sensing method
■Measurement time: Maximum 9999 hours 59 minutes
■Battery life: Approximately 5 years
■Using temperature: -10℃～+60℃