Collection: SPARK

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

【Compatible Models】SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-24)

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to stitching.

Special Features
1. 【Tape】 Colored tape is used to easily identify the front when covering.
2. 【Backing】 Non-woven fabric is used as backing for the mirror part to prevent rubbing.
3. 【Handle】 The handle part is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and band may vary depending on the production lot.
* As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-13B Black

[Compatible models] SEADOO SPARK Spark

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/14
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Made-to-order product] Please note that it may take approximately one month from the time of order.
*Orders cannot be canceled as they are made-to-order. Thank you for your understanding.

[Compatible models] SEADOO SPARK
[Color] Silver (*Photo shows pink; actual product will have the pink part in silver)

Billet Sponsons
Strong and cool finish with a machined aluminum base

【Compatible Models】SEA-DOO
SPARK 2-up (2014-19)
SPARK 2-up TRIXX (2017-19)

【Material】Polyester
The inner side uses long-fiber non-woven fabric to protect the body and fiber parts.
High quality, domestically produced from fabric to sewing

Features
1. 【Tape】 Colored tape is used to make it easy to identify the front when covering.
2. 【Backing】 Non-woven fabric is used as backing for the mirror parts to prevent chafing.
3. 【Handle】 The handle part is reinforced with double-layered fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please note】
* The color of the stitching, tape, and bands may vary depending on the production batch.
* As this is a made-to-order product, returns, exchanges, or cancellations are not accepted after placing an order.
Production lead time is 2 weeks to 1 month. As it varies by season, please inquire in advance if you are in a hurry.

S-14B Black

【Compatible Models】SEADOO SPARK

Applicable models: SEA-DOO SPARK

This part serves as the inlet for the water flow that feeds the pump, and it has the effect of improving the grip on the water surface.

Intake Gate

【Compatible models】
SEA-DOO SPARK (Compatible models listed below)

Bypasses the resonator between the muffler and the water box to increase exhaust efficiency.

【Please note】
・If marked "Order" or out of stock, it will take time to prepare.
・As this is an overseas order product, cancellations, returns, and exchanges are not accepted after an order has been placed.

Compatibility details
2025 Sea-Doo Spark (2up)
2025 Sea-Doo Spark (3up)
2025 Sea-Doo SPARK TRIXX (1up)
2025 Sea-Doo SPARK TRIXX (3up)
2024 Sea-Doo Spark (2up)
2024 Sea-Doo Spark (3up)
2024 Sea-Doo SPARK TRIXX (1up)
2024 Sea-Doo SPARK TRIXX (3up)
2023 Sea-Doo Spark (2up)
2023 Sea-Doo Spark (3up)
2023 Sea-Doo SPARK TRIXX (2up)
2023 Sea-Doo SPARK TRIXX (3up)
2022 Sea-Doo Spark (2up)
2022 Sea-Doo Spark (3up)
2022 Sea-Doo SPARK TRIXX (2up)
2022 Sea-Doo SPARK TRIXX (3up)
2021 Sea-Doo Spark (2up)
2021 Sea-Doo Spark (3up)
2021 Sea-Doo SPARK TRIXX (2up)
2021 Sea-Doo SPARK TRIXX (3up)
2020 Sea-Doo Spark (2up)
2020 Sea-Doo Spark (3up)
2020 Sea-Doo SPARK TRIXX (2up)
2020 Sea-Doo SPARK TRIXX (3up)
2019 Sea-Doo Spark (2up)
2019 Sea-Doo Spark (3up)
2019 Sea-Doo SPARK TRIXX (2up)
2019 Sea-Doo SPARK TRIXX (3up)
2018 Sea-Doo Spark (2up)
2018 Sea-Doo Spark (3up)
2018 Sea-Doo SPARK TRIXX (2up)
2018 Sea-Doo SPARK TRIXX (3up)
2017 Sea-Doo Spark (2up)
2017 Sea-Doo Spark (3up)
2017 Sea-Doo SPARK TRIXX (2up)
2016 Sea-Doo Spark (2up)
2016 Sea-Doo Spark (3up)
2015 Sea-Doo Spark (2up)
2015 Sea-Doo Spark (3up)
2014 Sea-Doo Spark (2up)
2014 Sea-Doo Spark (3up)

【Compatible Models】SEADOO
For SPARK 2UP only (Cannot be installed on SPARK 3UP) (Separate product for 3UP, Part No.: RS15130-C)

By bypassing the resonator after the waterbox and directing exhaust to the rear,
engine performance is improved.

Applicable models: SEA-DOO SPARK

Increasing the air intake and feeding a large volume of air to the engine
improves low-to-mid range acceleration and increases top speed.

[Applicable model] SEA-DOO SPARK 2-seater

■Color: Black x Green

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam
[Back side] 3M adhesive tape included

[Compatible] For SEA-DOO SPARK
*Equivalent to OEM part number: 278002843

A lanyard that attaches to your vest
It is more reasonable than genuine parts.