Collection: lights

- Lamp size: 102 x 51 x 28mm

●Water resistant specifications

●Sold per unit

It has a ``water resistant'' design that can withstand water from above, such as rain and car washes.
Avoid submerging the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

● Wide Type: Uses LEDs with a wide illumination range.
● Mounting Hole Pitch: 50mm
● Sales Unit: One side (left/right distinction) *Please select left or right when viewing the trailer from the rear.

【Water-Resistant Specification】
Designed to withstand water from above, such as rain or car washes.
Please do not immerse the light unit in water, such as by backing the trailer into water. Water may enter the lamp and cause damage.

【Important】There are two types of combination lamps: "Wide" and "Narrow." Although they look similar, please note that their illumination ranges are different, and the shape of their connectors varies.
If you wish to confirm compatibility, please contact us beforehand via the inquiry form or provide your trailer model and chassis number when placing your order.

[In 2018, the white base has been changed to a black base. ]

■Size: Height 52 x Width 101 x Thickness 9mm
■Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

◆For ZERO 500Z Avanzard◆
【Limited Model Special Specifications for Advanced LED Combination Lamps】
・Bronze color reflector for a sharper rear view
・Vivid red light bar
・Advanced sequential turn signal

●Wide type: Uses LEDs with a wide illumination range.
●Mounting hole pitch: 50mm
●Unit of sale: One side (left/right distinction) *Please select left or right when looking at the trailer from the rear.

【Water-resistant specifications】
Designed to withstand water from above, such as rain or car washing.
Please note that the lights should not be submerged in water, such as by putting the trailer into water. Water may penetrate the lamp and cause damage.

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

SOREX genuine parts combination lamp
A lamp that is standard equipment on SOREX trailers since 2011.

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63

Triangle reflector with built-in LED 18 chips
Waterproof performance that clears IP67 standard

●Size: 160mm on one side
●Lights up in conjunction with brake and small.
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

There are two holes for attaching parts for Solex PWC trailers from 2013 onwards, vertically on the reflector.

■For trailer installation. With bolt ■Size: 160mm on one side
■Mounting bolt spacing: 65mm

A combination lamp that combines water resistance and visibility.

●Lamp size: 255 x 110 x 65 mm
Mounting hole pitch: 225 x 52 mm
●Look at the trailer from behind and choose left or right.
● (Sold in units of 1

★Water-resistant★
It is designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the light part in water, such as by putting the trailer underwater. Water may get inside the lamp and cause it to break.

Right: SX00-10 (ST-012)
Left: SX00-20 (ST-012)

●Narrow Type: Uses LEDs with a narrow illumination range.
●Mounting Hole Pitch: 50mm
●Sales Unit: One side (left/right distinction) *Please select left or right when looking at the trailer from behind.

【Water-Resistant Specification】
Designed to withstand water from above, such as rain or car washing.
Please be careful not to immerse the light portion in water, such as by putting the trailer into the water. Water may enter the lamp and cause damage.

【Note】There are two types of combination lamps: "Wide" and "Narrow." Although they look similar, please note that their illumination ranges are different, and the shapes of their plug-in ports are also different.
Customers wishing to confirm compatibility should inquire via the inquiry form in advance or provide the trailer model and chassis number when ordering.

●Trailer side waterproof connector

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

■Set contents: stay, license lamp, rivet

[Please note] Riveters are required for installation.

●SOREX license lamp.

■Size: 125 x 238 x 50mm (length x width x thickness)
■24V compatible
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
This is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
There is also a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63, 1216-64

●For trailer installation. Comes with bolts. *Type with mounting holes on both left and right sides.

■Size: 156mm on one side
■Left and right screw pitch: 110mm

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

■Size: 95 x 45 x 10 mm
■Mounting hole pitch: 39 mm
■Sales unit: 1 piece

■Water-resistant
Designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the lighting part underwater, such as by putting the trailer in water. Water may penetrate inside the lamp and cause damage.

Genuine SOREX Combination Lamp

■Product Size: Φ118 x 50mm
■Mounting Pitch: 70mm
■Units for Sale: 1 (2 required for left/right replacement) Universal left/right shape

■Water-resistant specifications
Designed to withstand water from above, such as rain and car washing.
Please do not immerse the light in water, such as by backing a trailer into the water, as water may enter the lamp and cause damage.

●Size: 170×50×45mm
●Mounting pitch: 225 x 52mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●Lamp size: 102 x 51 x 28mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

●Size: Height 60 x Width 230 x Thickness 30mm
●Sales unit: 1 piece/left and right common shape
●24V compatible

*Water resistant specifications: Built to withstand water from above, such as rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

-Size: 125 x 238 x 50mm (length x width x thickness)
●24V compatible
●Sold as one unit per side (common shape for left and right)

The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
Set includes raise lamp, smoothing cover, bumper base, and number bracket.
"RAYS Tail Lamp Kit" is also available. Product number 1216-61, 1216-62, 1216-63

●Size: 120 x 120 x 30mm (thickness)
●Symmetrical design (sold individually)

★Water-resistant specifications★
Designed to withstand water from above, such as rain or car washes.
Please note that the light should not be submerged in water, such as when launching a trailer into the water.
Water entering the lamp may cause damage.

back lamp
Size: Height 105 x Width 30 x Thickness 30mm

●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

It lights up in conjunction with the small light, improving the visibility of following vehicles.

●Sold in units of 1 piece.
●Size: 1 side 160mm

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

The left and right lights flash alternately in red.

●Application: Flashlight
●Mounting screws are not included. Please prepare separately.
●Equipped with 20 LED lights
●Size: 101x50x26mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
If the light part is submerged in water, such as when a trailer is placed in water, water may enter the lamp and cause it to break.