Collection: Accessories/Tools/Others

[KAWASAKI]
ULTRA 310LX / 310LX-S / 160LX (2022-)

- Deck mat for Kawasaki ULTRA 310LX / 310LX-S /160LX ( 20 22-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

【Purpose】Flywheel puller
【Compatible models】KAWASAKI 750-800 engines

Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki ST 750 1994-1995
Kawasaki STS 750 1995-1997
Kawasaki STX 750 1998
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki XiR 750 1994
Kawasaki ZXi 750 1995-1997
Kawasaki SX-R 800 2003-2011

【Note】
For models equipped with 440-650 engines, please purchase "003-319 (discontinued)".

*Shear pin (58131-ZV0-000) and cotter pin (94201-30402) are not included.

Genuine Honda outboard engine parts.
We recommend replacing this part when replacing the propeller, etc.

●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.

[Disclaimer]
*Color may vary depending on shipping time. please note that.

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

[Applications] A highly versatile puller that can be used for pulling out steering wheels, flywheels, motorcycle crankcases, gears, etc.

[Usage range] 38-96(mm)

[Tools used] 14mm wrench (*not included)

[set content]
・1 puller body
・1 center screw
・3 center screw adapters
・3/8” (24TPI) x 1-1/2” puller bolts 3 pieces
・3/8” (16TPI) x 2” puller bolts 3 pieces
・3/8” (16TPI) x 3” puller bolts 3 pieces
・2 3/8” (16TPI) x 4-1/2” puller bolts
・2 5/16” (18TPI) x 6” puller bolts
・3 5/16” (18TPI) x 3-1/2” puller bolts
・2 5/16” (24TPI) x 3” puller bolts
・3 5/16” washers
・2 1/4” (28TPI) x 2-1/2” puller bolts
・2 1/4” washers
・M10 (P1.5) x 35mm puller bolt 3 pieces
・3 10mm washers
・M8 (P1.25) x 45mm puller bolt 3 pieces
・M8 (P1.25) x 65mm puller bolt 2 pieces
・M8 (P1.25) x 90mm puller bolt 2 pieces
・3 8mm washers

[Application] Ideal for locking 2 to wire
An indispensable item for installing seals, grips, etc.

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

● Band width: 38mm
●Diameter: Can be used with pistons from 54 to 127 mm.

The band that tightens the ring is a quick release type that can be easily removed and attached by removing the clip.

This is the most basic form of limescale pumping.

[Product specifications]
■Material: Made of floating polyethylene
■Size: H85 x W140 x D190mm

【please note】
*Please note that the color may differ from the photo depending on the arrival time.

[Application] A tool to measure the pop pressure of the valve seat.

●Used for carburetor setting and tuning.

[Applicable models] KAWASAKI Kawasaki 900/1100
[Application] Flywheel removal tool

STS 900(2001-2002)
STX 900(1997-2006)
ZXi 900(1995-1997)
STX 1100(1997-1999)
STX-DI 1100(2000-2003)
Ultra130-DI 1100(2001-2004)
ZXi 1100(1996-2003)

【Compatibility】SEADOO 800/951 engine
●Support tool used to remove flywheel bolts.

【Information regarding genuine parts】
---------------------------------------------------------------------
*As this product is a genuine part, cancellations and returns after ordering are not accepted.*
Please confirm the following before ordering.
1. Manufacturer
2. Model name (common name): Please check from the vessel inspection certificate (under "Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is listed on a plate affixed to the side or rear of the hull or in the vessel inspection certificate (under "Subject" inside the back cover).
---------------------------------------------------------------------
●About displayed prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please be aware of the above in advance.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Because orders are placed with the manufacturer immediately after your order is confirmed, cancellations or changes to order content due to customer reasons are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will notify you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

●This tool is used to crimp bands on fuel hoses and engine boots.

[Guidance Regarding Genuine Parts]
---------------------------------------------------------------------
※As this product is a genuine part, cancellations and returns after ordering are not accepted.※
Please be sure to confirm the following items before ordering.
1. Manufacturer
2. Model name (common name): Please confirm from the marine inspection handbook (under "Subject" on the inside of the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate affixed to the side or rear of the hull or in the marine inspection handbook ("Subject" on the inside of the back cover).
---------------------------------------------------------------------
●About Displayed Prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. We will contact you in such cases.
Please be aware of the above in advance.

[Please Read Before Ordering]
This product is a **manufacturer-ordered item (genuine part)**.
As we promptly place orders with the manufacturer after your order is confirmed, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

[Outlet reason] Special price for stock replacement

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.

●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

POWERBUILT Ratchet Box Handle 12mm

[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.

POWERBUILT Ratchet Box Handle 10mm

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

[Size] Total length 15cm
[Application] Stops leaks by clamping the hose [Compatible] Hose diameter up to 13 mm

The lock ring in the middle of the clamp moves freely and locks the hose in the crushed position.
To release it, simply squeeze it again and return the lock ring to the lever's raised position.