Collection: bestseller

【Compatible models】
SEA-DOO SPARK 3-seater

※The ski pylon cannot be used for tubes, etc.

※Cannot be used with SPARK 2-seater.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience cannot be accepted in principle.
In addition, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Compatibility】
RXT-X300, GTX-L300, WAKE Pro 230, GTX170/155 (2018 and up)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the current required for proper charging time, preventing overcharging of equipment.

●Standard equipment on 2018 - GTX Limited300 models.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this.

●This kit contains the necessary parts for installing the SEA-DOO genuine fender (Part No.: 295100418).

●Snap-In Fenders Installation Kit

●2 pcs/set

※This kit is for one side. If you need to install fenders at 4 points (left and right), you will need 2 sets.

【Compatibility】
●SEA-DOO iBR models 2017 and older (※Not required for SPARK.)

【Please read before ordering】
This is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, it is promptly placed with the manufacturer, so cancellations or changes to order contents due to customer convenience cannot be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
We kindly ask for your understanding and cooperation when placing an order.

A spray-type solvent for cleaning the exterior of engines.
Used to remove grease, oil, and other dirt.

Net weight: 400g

[Disclaimer]
*Due to the nature of the container, shipping to Okinawa Prefecture and remote islands in all prefectures is not possible.
*Due to the nature of the product, some items cannot be shipped together.

[Please confirm before ordering]
This product is a **manufacturer-ordered product (genuine parts)**.
As orders are placed with the manufacturer immediately after confirmation, cancellations or changes to order contents due to customer convenience are generally not accepted.
Furthermore, delivery may take time depending on the manufacturer's stock status. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging the above.

【Applicable Models】SEA-DOO
RXT-X *aS (suspension) equipped models
RXT-X aS 260 (2011-2016)
*For RXT-X without aS, use part number: 280000472

Genuine SEA-DOO PWC cover.
Designed for a perfect fit and made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an取り寄せ商品 (ordered item).*
*Due to this being a genuine product, cancellations or returns after order placement are not possible.*

●When selecting a product, please be sure to check the following items before ordering.
1. Please purchase after carefully checking the manufacturer, 2. model name (common name), and 3. model year.
●About the displayed price
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers or prices, the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; please be aware of this in advance.

【Please read before ordering】
This product is a **manufacturer取り寄せ商品 (genuine part)**.
To promptly place an order with the manufacturer after your order is confirmed, we generally cannot accept cancellations or changes to your order due to customer convenience.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We appreciate your understanding and ask that you place your order accordingly.

【Compatible models】SEA-DOO
RXP / RXP-X (2004-2011 models)

Genuine SEA-DOO PWC cover.
Designed for a perfect fit and made with UV-resistant fabric.

【Information regarding genuine products】
*This is an order-only product*
*As this is a genuine product, cancellations and returns after ordering are not possible*

●When selecting a product, please be sure to check the following items before ordering.
1. Please carefully check the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About displayed prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you before shipping. Thank you for your understanding.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery date as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

● Ergonomically designed grip for easier and more aggressive machine control.

● Genuine grip adopted by SEA-DOO since 2016.

● Easy to replace from normal grips on Sea-Doo models from '99 onwards (excluding '14-'15 SPARK).

【Compatibility】Sea-Doo models from '99 onwards (excluding '14-'15 SPARK)

【Contents】1 piece per side. *Two pieces (left and right) are required for one machine.

【Installation】Bolts, washers, inserts, and caps are not included. Please use existing ones.

*The first photo shows both left and right grips.
*If you need a set for one machine, please order one left and one right grip.

【Please read before ordering】
This product is a **manufacturer's取り寄せ商品 (genuine part)**.
As orders are promptly placed with the manufacturer after confirmation, cancellations or changes to order content due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging these points.

●This is a genuine SEA-DOO STARTER RELAY.

【Compatible Models】
SEA-DOO 4-stroke / 2-stroke (580, 650, 720, 800, 951 engines)

【Please Read Before Ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once an order is confirmed, we promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery time as soon as it is confirmed.
Please understand this in advance and place your order.

【Compatible Models】SEA-DOO
GTX / RXT *iS (suspension) models
RXT iS (2009-2016)
GTX iS (2009-2016)
GTX Limited iS (2009-2016)

For 2017 GTX models (without suspension), please use item number: 280000472
For 2017 GTX models (with suspension), please use item number: 280000587.

Genuine SEA-DOO PWC cover.
Designed for a snug fit, made with UV-resistant fabric.

【Information regarding genuine products】
※This is an取り寄せ (order-to-stock) product※
※As this is a genuine product, cancellations and returns are not possible after ordering※

●Please ensure you check the following items before ordering to select the correct product.
1. Please verify the manufacturer, 2. model name (common name), and 3. year before purchasing.
●About displayed prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; please be aware of this in advance.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to order contents due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

【Compatible Models】SEA-DOO RXT(-'09) / RXT-X(-'09)

【Important】
This is an internationally sourced product, so delivery may take a long time.
Detailed delivery times will be provided after your order is placed.

Genuine SEA-DOO PWC cover.
Designed for a perfect fit, made with UV-resistant fabric.

【Regarding Genuine Products】
*This is an取り寄せ商品 (ordered item)*
*As this is a genuine product, cancellations and returns are not possible after ordering.*

●When selecting a product, please be sure to check the following items before ordering.
1. Please confirm the manufacturer, 2. model name (common name), 3. model year, etc., before purchasing.
●Regarding displayed prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers or prices, the listed price may differ from the actual selling price. In such cases, we will contact you before shipping; thank you for your understanding.

【Please Read Before Ordering】
This product is an **取り寄せ商品 (ordered item) from the manufacturer (genuine parts)**.
Since we promptly place orders with the manufacturer after your order is confirmed, cancellations or changes to order content due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

●SEA-DOO Genuine Wear Ring 161mm

【Compatible Models】
RXT-X 325 / RXT-X 300
RXP-X 325 / RXP-X 300
GTX-L 325 / GTX-L 300

【Please Read Before Ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer reasons cannot be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these terms.

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.
The arm part is made of stainless steel and is resistant to rust, and the grip part is made of rubber for easy grip.

■Mountable bolt pitch: approx. 74-79mm
(Mounting hole center - center size: approx. 75mm)
■Bolt diameter: Approximately 8-13mm

【please note】
Only the coupler handle and other items are not included.
Mounting bolts are not included.

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

The left and right lights flash alternately in red.

●Application: Flashlight
●Mounting screws are not included. Please prepare separately.
●Equipped with 20 LED lights
●Size: 101x50x26mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
If the light part is submerged in water, such as when a trailer is placed in water, water may enter the lamp and cause it to break.

■In addition to fixing the jet handle pole, you can also freely adjust the length with the stopper part.

■Length: 100cm

■Compatibility: For Honda outboard motors (from 2001) 3/8” hose 8900-7 (17650-ZW9-003)
■Compatible with 9.5mm inner diameter hose

By installing this fitting, the connection to the fuel tank can be installed and removed with one touch.
It is used by securing it to a hose with an inner diameter of 9.5 mm using a clamp.

*The fitting for the tank side hose is part number: 99524.

【please note】
Can only be used with square hole type outboard motors.
Please note that some Honda outboard motors manufactured before or around 2001 have round holes instead of the square holes shown.

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Suzuki outboard motors (75hp or more) 1/4” NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 52 x depth 38mm
Cleat width: 145mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm

*When installing, a space of 80mm or more is required under the cleat base.
...
■With water drain hole

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 114x depth 33mm
Cleat width: 110mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm
*When installing, a space of 80mm or more is required below the cleat base.
...
■With water drain hole

■Compatibility: 3/8” hose 8902-7 (17660-ZV5A00) for Honda outboard motors
■Compatible with 9.5mm inner diameter hose

Fitting for outboard motor fuel tank hose
Secures to a 9.5mm inner diameter hose with an optional clamp.
It can be attached and removed with one touch to the tank side fitting.

*The fitting for the outboard motor side is part number: 99522.

■Compatibility: 1/4” NPT 8901-7 (16977-ZV5A00) for Honda outboard motors
■Tank part screw size: 1/4 inch outer diameter 13mm

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Type: Hose side fitting (for diameter: Φ13mm)

■Compatibility: For Suzuki outboard motors (75 HP or more) 3/8” hose

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●For general metal threaded pipe fittings. Contains Teflon so there is no galling when tightening.
●It has high clay and thixotropic properties, so even large diameters have instant sealing properties.
●Low strength type that can be removed using regular tools.

【detail】
●Contents: 50ml
●Breakdown/Escape Torque (N・m): 7
●Operating temperature range: -55 to 150℃

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 33mm
■Total length: 76mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

- Compatible with A series fender, G series fender, F series fender, HTM series fender
●A hand pump for manually inflating air.
●Since the amount of air injected is small, please use it to replenish air when it leaks.

*Exclusively made by Polyform (for fenders that use 97561 nozzle).
*Please note that it cannot be used with other companies' fenders!
*Nozzle is not required when using this pump.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 32mm
■Total length: 84mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 61mm
■Maximum thickness when inserting flange: 43mm
■Effective length of hose insertion part: 37mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 430 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

●A22mm B34mm C89mm D44mm E17mm
●Small roller attached to the end of the bow keel
●Made of hard rubber

[Product Specifications]
■Material: Plastic
■Diameter: 180φ
Hole diameter: 16mm

●It is also possible to set up courses and float rope nets, etc.

[Product specifications]
■Material: Plastic
■Diameter: 300φ
■Hole diameter: 19mm

●You can also set up courses and float rope nets.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 28.5mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30cm.

【please note】
*Suruharu in the photo is not included.

[Product specifications]
■Material: Plastic
■Diameter: 360φ
■Hole diameter: 23mm

●You can also set up courses and float rope nets.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 19mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

【please note】
*Suruharu in the photo is not included.

●By attaching this support before putting on the boat cover, you can make it easier to put on the cover.
Furthermore, the cover can be stretched while applying tension, which prevents rainwater from collecting on the cover.
●The cover support pole comes with three types of tip shapes: button, rubber holder, and thin rod shape, so it is a cover support pole that can be fixed in a variety of ways.

[Product specifications]
■Material: Aluminum
■Pole length: 91cm to 162cm
■Included: 3 types of adapters are standard equipment

●An eye plate with two-point fixation suitable for installation in places with limited installation space.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 76 x Width 22 x Height 25mm

●Attach to the tip of the hitch coupler to protect the towed vehicle from scratches.
● To install, just clip it onto the edge of the coupler.
●Made of rubber
●Coupler is not included.

●A navigation light mast made of rust-resistant stainless steel.

●The base part can be easily collapsed by loosening the knob, making it convenient for storing or passing under bridges.

-Pedestal dimensions: 57mmX95mm

- Total height: 450mm

●Pipe used: diameter 25φ stainless steel pipe

*The main body and navigation light installation screws are not included.

[Product specifications]
■Capacity: 6 gallons / 22.7 liters
■Size: L552 x W375 x H267mm (*Height is up to the cap surface)
■Gauge is included with the main unit

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●A foldable, hanging type radar reflector.

[Product specifications]
■Material: Aluminum
■Dimensions: 215 x 215 x 280mm

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

[Product specifications]
■Type: Wall-mounted type
■Body material: Plastic
■Size:
Length 345 x height 65 x depth 33mm
...
■Set of 2

● Gently secure the handle and tip of the rod with foam.
●The soft foam protects the rod from vibrations from the boat and prevents damage to the rod.
●Fix using the hole on the side of the plastic frame.