Collection: bestseller

The height and front and rear positions of the rollers can be adjusted to suit the hull.
Compatible with single boats of each manufacturer.
It is designed to be fixed by co-tightening with the rail and to have the optimal rail width for single boats.

■Size: 80x25mm (diameter x thickness)
■Set of 2

■An essential item when mooring your boat! A retractable boat hook that can be fixed in any position.

■Adjusting the length of the handle is very easy, just twist the aluminum pipe part to the desired length, and then twist it the other way.

■Material: Aluminum (body), plastic rubber (handle tip)

■Specifications: 2-stage expansion and contraction

■Stretch width: 124-217cm

■Pipe diameter: 29mm

[Content capacity] 2L, 5L
[How to use] Put the detergent in a plastic bucket, apply it to the hull with a brush, etc., and wash it with water after 5 to 10 minutes.
[Application] A detergent for removing red rust from iron on FRP ships and dirt at the same time.

【please note】
*As this is an acidic detergent, please be careful not to get it in your eyes or directly on your skin.
*The rust remover may turn yellow, but there is no problem with the ingredients.

●Made by Takeuchi Kasei Co., Ltd.

This is a great value kit that can repair FRP and includes the necessary amount.

[Kit contents]
■Resin: 2kg (with paraffin)
■Hardening agent: 50cc
■Polyester putty: 200g
■Glass mat: 2m x 1m
■Wool roller: 75mm x 1
■ Spatula tree: 1 piece
■Cleaning acetone: 1L
■Polypoid: for 10cc

[Product specifications]
■Material: Stainless steel SUS
■ Breaking strength: 800kg

●A safety hook that is resistant to rust and corrosion.
●The hook has a spring mechanism.

●Drilling size: 24φmm
●Flange size: 51×34mm
●Screw screw hole: φ6mm
- Distance between screw centers: approx. 38mm

*Main body only, mounting screws etc. are not included.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 5500kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

●Draining water from boats without power sources, such as canoes and rubber boats,
It can also be used to drain water from pools and cages.

●A cordless pump that can be used with seawater or fresh water and uses batteries.

●Since it uses batteries (3 AA batteries), no wiring is required.

●Maximum discharge rate 12.6L/min
●Pumping height: 100cm
● Can be used continuously for about 5 hours (when using alkaline batteries)
●Dimensions: Height approx. 16.2x Diameter approx. 13.3cm
●Weight: Approximately 900g
●Hose length: 1m

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 15000kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 10300kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

■Length: 1,170mm (excluding hook)
■Hook: 110mm

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Stainless steel SUS304

For tight japan hitch

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Since it uses an L-shaped cylinder, it is easy to attach and detach at the center of the hitch member, which tends to be narrow.

■Pin diameter: 16mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Compatibility: 3/8” hose 8894-7 for Yamaha outboard motors

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with YAMAHA outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use the product. For fitting compatibility, please check the diameter shape before making your selection.

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Yamaha outboard motors 1/4”NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with YAMAHA outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use the product. For fitting compatibility, please check the diameter shape before making your selection.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Product specifications]
■Type: Twin
■Material: Stainless steel
■Current: 6A
■Voltage: 12V
■Output: 109dB
■Basic frequency: H490±20/L440±20HZ
■Size: 210×83×55mm

●This is a horn for ships.
●A compact type made of rust-resistant stainless steel material.
●Since it can be installed anywhere, it is ideal for boats with limited space.
●Since it is a twin type with high and low notes, it produces a more spacious tone compared to a single type.

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

[Product specifications]
■Material: Polyethylene
■Total length: approx. 60cm
■Hose diameter: 19.0mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

A bracket for navigation lights made of rust-resistant 304 stainless steel.

■Adaptation: Bracket for Ibuki Kogyo's navigation light "NAUTILIGHT NAVI"
■Material: Stainless steel (SUS 304)
■Mounting surface dimensions: Width 110 x Height 30 x Depth 90mm
■Electrolytic polishing finish

【please note】
*Bracket only; screws and rubber gaskets to secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

●It is a strong and stable eye plate because it is firmly fixed at 4 points.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 50 x Width 40 x Height 29mm

●It is a strong and stable eye plate because it is firmly fixed at 4 points.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Length 41 x Width 36 x Height 22mm

[Product specifications]
■Type: Single
■Current: 3A
■Voltage: 12V
■Output: 106dB
■Basic frequency: 440±20
■Size: 93×83×55mm

●This is a horn for ships.
●A compact type made of rust-resistant stainless steel material.
●Since it can be installed anywhere, it is ideal for boats with limited space.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 55mm
■Maximum thickness when inserting flange: 31mm
■Total length: 65mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal Straight. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 39mm
■Maximum thickness when inserting flange: 23mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Material: Polyethylene
■Total length: approx. 60cm
■Hose diameter: 28.5mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

【Applicable Models】
Yamaha Wave Raider700 1994-1997
Yamaha Wave Raider Deluxe700 1995
Yamaha Wave Runner III700 1994-1995
Yamaha Wave Runner III700 1997
Yamaha Wave Venture700 19951996
Yamaha Wave Venture700 1998
Yamaha XL700 1999-2004
Yamaha Wave Runner GP800 1998-2000
Yamaha XL800 2000-2001
Yamaha XLT800 2002-2004
Yamaha GP1200 1997-1999
Yamaha XL1200 1998

●Genuine Parts: Equivalent to 6M6-44517-00-5B, 6M6-44517-A1-8P, 6M6-44517-A1-5B

■Sales unit: 1 piece
Essential for improving engine durability, and economical to purchase.

【Please note】
Colors may vary depending on the time of arrival.
If you purchase multiple units, the colors may not be consistent, so please be aware of this in advance.

【Compatible Models】
Yamaha GP 800 2001-2002
Yamaha GP-R 800 2003-2005
Yamaha FX 1000 2005-2008
Yamaha FX 140 1000 2002-2004
Yamaha FX Cruiser 1000 2003-2008
Yamaha FX Cruiser HO 1100 2004-2008
Yamaha FX HO 1100 2004-2008
Yamaha V1 1100 2015-2016
Yamaha V1 Sport 1100 2015-2016
Yamaha VX 1100 2007-2009
Yamaha VX Cruiser 1100 2007-2017
Yamaha VX Deluxe 1100 2005-2017
Yamaha VX LTD 1100 2016-2017
Yamaha VX Sport 1100 2005-2015
Yamaha GP-R 1200 2000-2001
Yamaha GP-R 1300 2004-2008
Yamaha FX Cruiser HO 1800 2009-2015
Yamaha FX Cruiser SHO 1800 2008-2015
Yamaha FX Cruiser SVHO 1800 2016
Yamaha FX Cruiser SVHO LTD 1800 2017
Yamaha FX HO 1800 2009-2015
Yamaha FX SHO 1800 2008-2015
Yamaha FX SVHO 1800 2016
Yamaha FZR 1800 2009-2015
Yamaha FZS 1800 2009-2015
Yamaha GP 1800 2017
Yamaha VX Cruiser HO 1800 2016
Yamaha VXR 1800 2011-2014
Yamaha VXS 1800 2011-2014

Genuine parts: Equivalent to 68A-44517-00-9M, 68A-44517-00-8P, 67X-44517-00-8P,
67X-44517-10-94, 67X-44517-00-5B, 67X-44517-10

■Sales unit: 1 piece
Essential for improving engine durability, and it's affordable and economical.

【Disclaimer】
Colors may vary depending on the time of arrival.
If you purchase multiple items, the colors may not match. Please be aware of this in advance.

【Compatible models】YAMAHA 1200XLT (01-05) / XL-LTD (99-00)
OEM parts: Equivalent to 68N-44517-00, 68N-44517-00-8P, 68N-44517-00-94, 66V-44517-00-8P

■Sales unit: 1 piece
Essential for improving engine durability, and affordable.

【Please note】
Colors may vary depending on the time of arrival.
If you purchase multiple items, the colors may not be consistent, so please be aware of this in advance.

When setting it in the connector, ensure that it is installed on the screw to prevent non-electricity.

[Quantity] 6 pieces 1 set