Collection: New product

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Sold separately for left and right (1 piece each) (Please choose left and right when looking from the rear of the trailer.)

●Additional fixing hook ●Mounting plate required for removing the retractable transom tie-down ●Hook compatible with advanced LED combination lamps

■Includes mounting bolts and nuts

Ball mount with O-ring (SRX-071) to reduce rattling noise during towing
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Due to individual differences, processing may be required due to misalignment of hole positions.

【Notes on ordering】
*Please provide the "car model" so that the class can be stamped.
*Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
SOREX ball mounts are available in matte (SRX-123), mirror (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Types different from your existing mount may not be usable. Please be careful.

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

Ensures stability when parked.

■SRX-117-1 For NF-1/NF-E
■SRX-117-2 For boat trailers

【Requests and Precautions When Ordering】
*When ordering, please provide the "trailer model and installation position at time of order."
*This information will be used to confirm compatibility with the manufacturer when arranging the product.

[Requests and Precautions When Ordering]
*Please provide the following trailer information when ordering: (model, year, VIN)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

[Shipping Information]
●Cannot be combined with other items...To prevent scratches and damage, this item will be shipped individually. Cannot be combined with other items in one package.
●Direct shipment product...This product is shipped directly from the manufacturer, so "cash on delivery" and "combined packaging" are not possible.
●Limited payment methods...Bank transfer or credit card only (cash on delivery not accepted)
●Shipping will be calculated as [shipping cost x quantity] per item.

[Delivery]
Shipping costs to Okinawa Prefecture will be estimated separately each time.

Stainless steel ball mount with O-ring (SRX-071) to reduce rattling noise during towing.
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Processing may be required due to misalignment of hole positions caused by individual differences.

【Precautions when ordering】
*Please provide your "car model" so that we can engrave the class.
*Cancellations, changes, and returns will not be accepted if the model confirmation result is not a mismatch.

【Information】
Solex ball mounts are available in matte (SRX-123), mirror finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

Steel Ball Mount
■Shaft Diameter: φ19mm
■For SOREX Square Type (SX3002) Hitch Members Only

※Hitch ball and quick-release pin are not included.
※Processing may be required due to misalignment of hole positions caused by individual differences.

【Notes on Ordering】
※Please provide your "vehicle model" for grade stamping.
※Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
Sorex ball mounts are available in matte finish (SRX-123), polished finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

■Lineup
SRX-016-B1 45x75 for Side Frame
SRX-016-B2 75x75 for Tongs
SRX-016-B3 for Wide

*10-inch wide tires
are mounted vertically to the side frame using the wide bracket (SRX-016-B3).

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

【Compatible models】KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035W-GR Green
SE-101035W-RD Red

・NEW-WIDE (The base is 8mm wider than conventional models, improving running stability!)
・The angle of the side fins can be adjusted steplessly from 0 to -12 degrees relative to the lower edge of the sponson plate.
・The protrusion amount of the side fins is 25mm from the sponson plate surface.
・The sponson plate with side fins has its rear end cut, reducing the protrusion amount.
・The mounting position of the sponson plate can be selected from 4 positions: up to 24mm in the front-back direction and up to 11mm in the up-down direction, similar to conventional models.
・The flap at the rear end of the base plate can also be adjusted steplessly from 0 to -14 degrees, similar to conventional models.
Guide lines are engraved, making it easy to align the angles on both sides.

【Compatible models】 YAMAHA FZR / FZS

【1】SE-027020 For STD standard handlebars (STD bar Φ22.4)
【2】SE-027020F For FAT fat handlebars (FAT bar Φ28.6)

● Developed in collaboration with Krismackle Gauge!
● The handlebar position is set as low as possible to suit racing conditions.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select the size
NHT08: Outer diameter 8 x 8 x 8mm / Inner diameter 5 x 5 x 5mm
NHT10: Outer diameter 10 x 10 x 10mm / Inner diameter 7 x 7 x 7mm
NHT12: Outer diameter 12 x 12 x 12mm / Inner diameter 10 x 10 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRT1008: Outer diameter 8 x 10 x 10mm / Inner diameter 5 x 7 x 7mm
NHRT1210: Outer diameter 10 x 12 x 12mm / Inner diameter 7 x 8 x 8mm
NHRT1412: Outer diameter 12 x 14 x 14mm / Inner diameter 8 x 10 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRE0806: Outer diameter 6 x 8mm / Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm / Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm / Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14mm / Inner diameter 8 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Select a size
NHRC0806: Outer diameter 6x8mm / Inner diameter 4x5mm
NHRC1008: Outer diameter 8x10mm / Inner diameter 5x7mm
NHRC1210: Outer diameter 10x12mm / Inner diameter 7x8mm
NHRC1412: Outer diameter 12x14mm / Inner diameter 8x10mm

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

●This kit converts a 2-wheel launcher to a 4-wheel type.

*However, it cannot be attached to the "J-130SX Single Compact".
*Processing work such as cutting to length is required.

*Please note that the type differs depending on the model.
★JL222: J-130/J-1300/J-1300X *Cannot be attached to J-130SX
★JL223: J-1480/J1480X

【Product Information】
●To prevent scratches and damage, this product is shipped individually and cannot be combined with other items.
●Due to direct manufacturer shipping, "cash on delivery" and "combined packaging" are not possible.

Tether for YAMAHA

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

T-shaped
Made of aluminum with a plated finish, it adds a stylish touch to water areas.
The pipe body is also very compact.

■Quantity: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: Different diameters (Outer diameter 9.5mm, 6.3mm; Inner diameter 7.7mm, 5mm)
3/8 x 3/8 x 3/8: Same diameter (Outer diameter 9.5mm; Inner diameter 7.7mm)

[1: 97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2: 97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3: 97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4: 97-4339] 3/8×1/2×1/2 Outer diameter 11mm・14mm Inner diameter 6mm・8.5mm.

Shape: T-shape
Used when changing the routing by installing it between cooling hoses, or when establishing a bypass line.

Parts PWC personal watercraft engine parts jetski jet ski

When the tension of this spring is weakened, throttle response improves, but it becomes more prone to burning due to vibrations and the like. If it is strengthened, the opposite effect occurs.
As the grammage increases, the tension becomes stronger.

■Quantity: 1 piece

Colored Plug Cap
●Quantity: 1 piece

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

●Colors: 4
●Width: 50mm
●Strap Length: 5,000mm

The addition of a multi-strap feature to the hook reduces damage to the hull!
It also makes it easy to secure to PWCs, which are typically difficult to attach hooks to, improving functionality.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue - Discontinued

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

●Teardrop-shaped air fender.
●Thick-walled with reinforced ribbed holes for rope attachment, making it durable and suitable for use as a course buoy when inverted.
●Easily inflatable with an air compressor or air gun.

【Product Specifications】
■Size: Diameter / Overall Length / Eye Diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm / 590mm / 25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【Please Note】
Air inflation nozzle is not included.
※If you require an air inflation nozzle, please purchase the separately sold item [Part No.: 97561].
※Products are delivered deflated.

・Material: Steel
・Plate thickness: 2.0mm
・Product details: Plate only (screws etc. not included)

Size: Please check A/B/C/D along with the image.
●L-shaped / Manufacturer: 0103-01 ■A: 60 /B: 95/C: 50/D: 35mm
●L-shaped long / Manufacturer: 0103-04 ■A: 60 /B: 95/C: 50/D: 90mm
●Straight* / Manufacturer: 0103-03 ■A: 115/B: 95/C: 50/D: 0mm
*Straight is a flat plate without bends

■For MIKUNI
■WSM product
*Some items may not have a stamped number depending on the gauge.
*Due to the material, some discoloration that does not affect use may be observed. We appreciate your understanding in advance.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Please use compatible main jets and slow jets for CV and CDCV carburetors.
■WSM products
*Some products may not have the number stamped on them.
*Due to the material, some discoloration that does not affect use may be observed.

006-7080

006-7110　110
006-7115　115
006-7120　120
006-7125　125
006-7128　128
006-7130　130
006-7132　132
006-7135　135
006-7138　138
006-7140　140
006-7142　142
006-7145　145
006-7148　148
006-7150　150
006-7152　152
006-7155　155
006-7158　158
006-7160　160
006-7162　162
006-7165　165