Collection: engine parts

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

Insert into the male flasher adapter with one touch,
If used with a mixer, it can be used on KAWASAKI and SEA-DOO boats.

During engine flushing using salt remove fluid
This product connects the hull and mixer and washes with water.

【Compatible models】SEA-DOO
●300hp models & 2018 and later models (equivalent to genuine part number 420956744)
●260/255/230/215/185/155/130hp models (-2017) (equivalent to genuine part number 420956741)

*Excludes GTI90/SPARK

・・
This aftermarket oil filter offers excellent cost performance at a lower price than genuine parts.
■Accessories: 1 thin O-ring, 1 thick O-ring, 1 small O-ring

【About Oil Filters】
Sludge generated from impurities in fuel and oil, and
metal powder from friction between cylinders and piston rings, etc., are produced inside the engine.
Engine oil washes away these contaminants,
allowing the engine to continue to function properly.

However, over repeated long-term use, engine oil becomes dirty and degrades,
so the filter cleans it to prevent re-adhesion of dirt and degradation.
The role of the oil filter is to maintain the long life cycle of the oil.

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■For MIKUNI
■WSM product
*Some items may not have a stamped number depending on the gauge.
*Due to the material, some discoloration that does not affect use may be observed. We appreciate your understanding in advance.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL56008SL Silver
UL56008BK Black
UL56008GR Green
UL56008BL Blue
UL56008OR Orange
UL56008RD Red

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL56009SL Silver
UL56009BK Black
UL56009GR Green
UL56009BL Blue
UL56009RD Red

- Enhances the whistle from the supercharger at idle, creating a nice hiss when you lightly crack the throttle and a supersonic charger noise when you back off the throttle at full boost.

- Can be installed in 5 minutes and includes a block-off cap for the air box and a low-profile hose clamp for attaching the vent hose.
・Instructions are also included

*The last few pictures are just to show how it will fit into the vent, the real vent is not included.

[Compatible with] YAMAHA Yamaha
760/800/1100/1200/1800 (*700 is not possible)

●The hose spigot is a one-touch joint connector type, so it can be used in conjunction with general-purpose one-touch connectors.

●When flushing the engine using salt remove liquid, it can be used in conjunction with the mixer to connect the hull and mixer.

●Made of aluminum billet

●Sold in units of 1 piece.

Used to adjust the amount of fuel supplied within the carburetor.
The larger the size, the greater the supply.

Product number/size
006-360/1.5
006-361/2.0
006-362/2.3
006-363/2.5

●O-ring for Salt Away mixer (SA-M)

T-shaped
Made of aluminum with a plated finish, it adds a stylish touch to water areas.
The pipe body is also very compact.

■Quantity: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: Different diameters (Outer diameter 9.5mm, 6.3mm; Inner diameter 7.7mm, 5mm)
3/8 x 3/8 x 3/8: Same diameter (Outer diameter 9.5mm; Inner diameter 7.7mm)

When the tension of this spring is weakened, throttle response improves, but it becomes more prone to burning due to vibrations and the like. If it is strengthened, the opposite effect occurs.
As the grammage increases, the tension becomes stronger.

■Quantity: 1 piece

●UL14101: Inner diameter Ф60 x total length 70mm
●UL14102: Inner diameter Ф70 x total length 70mm

This is an exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

Exhaust nozzle for SE ULTRA310/300/260/250
This part adds a stylish touch to the exhaust port.

【Applicable models】YAMAHA
FX Cruiser HO (1.8L) 2019-2023
FX Cruiser HO (1.9L) 2024-2026
FX Cruiser SVHO 2019-2026
FX HO (1.8L) 2019-2023
FX HO (1.9L) 2024-2026
FX Limited SVHO 2019-2026
FX SVHO 2019-2026

Bypasses the resonator, improving exhaust flow and enhancing performance.

【Please note】
・If marked "Made to order" or out of stock, please allow time for preparation.
・Due to being an international取り寄せ product, we cannot accept cancellations, returns, or exchanges after an order has been placed.

【Compatible models】 SEA-DOO
RXT-X 300 (2020-2021)
GTX-LTD 300 (2020-2021)

Bypasses the resonator between the muffler and the water box to improve exhaust efficiency.

【Disclaimer】
・If the product is marked as "取り寄せ" (backorder) or out of stock, it will take time to procure.
・As this product is imported, cancellations, returns, or exchanges after ordering are not accepted.

2025 Sea-Doo Explorer Pro 230
2025 Sea-Doo GTI 130 (iBR)
2025 Sea-Doo GTI SE 130 (iBR)
2025 Sea-Doo GTI SE 170
2025 Sea-Doo GTR 230
2025 Sea-Doo GTR-X 300
2025 Sea-Doo GTX 170
2025 Sea-Doo GTX 230
2025 Sea-Doo GTX 300
2025 Sea-Doo GTX Limited 325
2025 Sea-Doo RXT-X 325
2024 Sea-Doo Explorer Pro 230
2024 Sea-Doo GTI 130 (iBR)
2024 Sea-Doo GTI SE 130 (iBR)
2024 Sea-Doo GTI SE 170
2024 Sea-Doo GTR 230
2024 Sea-Doo GTR-X 300
2024 Sea-Doo GTX 170
2024 Sea-Doo GTX 230
2024 Sea-Doo GTX 300
2024 Sea-Doo GTX Limited 300
2024 Sea-Doo RXT-X 325
2023 Sea-Doo GTI 130 (iBR)
2023 Sea-Doo GTI SE 130 (iBR)
2023 Sea-Doo GTI SE 170
2023 Sea-Doo GTR 230
2023 Sea-Doo GTX 170
2023 Sea-Doo GTX 230
2023 Sea-Doo GTX 300
2023 Sea-Doo GTX Limited 300
2023 Sea-Doo RXT-X 300
2022 Sea-Doo GTI 130 (iBR)
2022 Sea-Doo GTI SE 130 (iBR)
2022 Sea-Doo GTI SE 170
2022 Sea-Doo GTR 230
2022 Sea-Doo GTX 170
2022 Sea-Doo GTX 230
2022 Sea-Doo GTX 300
2022 Sea-Doo GTX Limited 300
2022 Sea-Doo RXT-X 300
2021 Sea-Doo GTI 130 (iBR)
2021 Sea-Doo GTI SE 130 (iBR)
2021 Sea-Doo GTI SE 170
2021 Sea-Doo GTR 230
2021 Sea-Doo GTX 170
2021 Sea-Doo GTX 230
2021 Sea-Doo GTX 300
2021 Sea-Doo GTX Limited 300
2021 Sea-Doo RXT-X 300
2020 Sea-Doo GTI 130 (iBR)
2020 Sea-Doo GTI SE 130 (iBR)
2020 Sea-Doo GTI SE 170
2020 Sea-Doo GTR 230
2020 Sea-Doo GTX 170
2020 Sea-Doo GTX 230
2020 Sea-Doo GTX Limited 230
2020 Sea-Doo GTX Limited 300
2020 Sea-Doo RXP-X 300
2020 Sea-Doo RXT-X 300

[Compatible models] YAMAHA
FX CRUISER HO (2012-2021)
FX CRUISER SHO (2012-2014)
FX HO (2012-2021)
FX SHO (2012-2014)
FX CRUISER SVHO(2014-2021)
FXSVHO(2014-2021)

Exhaust air can flow better and performance will improve.

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select the size
NHT08: Outer diameter 8 x 8 x 8mm / Inner diameter 5 x 5 x 5mm
NHT10: Outer diameter 10 x 10 x 10mm / Inner diameter 7 x 7 x 7mm
NHT12: Outer diameter 12 x 12 x 12mm / Inner diameter 10 x 10 x 10mm

【Compatible models】
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can also be used with models other than ULTRA by drilling holes.

【Note】Flushing requires the company's Billet Flush Adapter 【UL18003】

Engine Flushing Aluminum Fitting
Simply replace the genuine stock part to add an accent to the rear-end view.

The brass adapter is attached and detached many times for each wash, so smoothness is important.
Since genuine (resin) parts wear out easily against metal, smooth washing cannot be performed with damaged screw threads.
By replacing it with this product (aluminum), compared to genuine (resin) parts,
Wear and削れ of the screw threads will be eliminated.

【Size】
■Mounting space φ56
■Drilled hole 34mm
■Hose barb outer diameter 18.5mm
■Inner diameter 12.5mm

■Compatible with: 500/800 bilge pump

■Material: Aluminum ■Hose piercing port: Ф19mm
■Exit hole: Ф15mm
■Mounting hole: Ф26mm

A straight type that can be installed flat on the hull.

UL013SL Silver
UL013BK Black
UL013GR Green
UL013BL Blue
UL013PU Purple

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

Applicable models:
●YAMAHA FX SVHO (19-)

●Far exceeds the intake efficiency of the standard filter.

●The power filter provides a stable supply of cool air to supercharged engines, providing significantly improved acceleration and RPM.

【Compatible Models】
KAWASAKI STX-15F / 15S / 12F

●Increases air intake, supplying a larger volume of air to the engine,
improving low to mid-range acceleration and increasing top speed.

●Directly mounts to the throttle body to enhance intake efficiency.

■Includes water-repellent pre-filter
■Accessories: Small breather filters × 2

■Material: Rust-resistant stainless steel

[Product specifications]
■Size/Quantity
JL50-120140: 120-140mm / 2 pieces
JL50-140160: 140-160mm / 2 pieces
JL50-1625: 16-25mm / 10 pieces
JL50-4060: 40-60mm / 10 pieces
JL50-6080: 60-80mm / 5 pieces
JL50-816: 8~16mm / 10 pieces

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

This is a genuine Yamaha hose adapter.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer's convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Thank you for your understanding and cooperation.

This is an authentic supercharger overhaul kit for SEA-DOO 255/215 HP (16-tooth).

OEM #: 420881102

【Compatible Models】
MakeModelCC / HPYear
Sea-DooGTR 21515032012-2016
Sea-DooGTX LTD Super Charged 21515032006-2016
Sea-DooGTX LTD Super Charged 25515032009
Sea-DooGTX LTD Super Charged 26015032010-2016
Sea-DooGTX Super Charged 21515032008-2013
Sea-DooGTX Wake Pro 21515032009-2016
Sea-DooGTX Wake Super Charged 21515032007-2008
Sea-DooRXP Super Charged 21515032006-2009
Sea-DooRXP X 25515032008-2011
Sea-DooRXP X 26015032012-2015
Sea-DooRXT is 25515032009
Sea-DooRXT is 26015032010-2012
Sea-DooRXT Super Charged 21515032006-2010
Sea-DooRXT X 25515032008-2009
Sea-DooRXT X 26015032010-2016

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
As we will promptly place an order with the manufacturer once your order is confirmed, cancellations or changes to your order initiated by the customer will not be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We ask for your understanding and request that you place your order accordingly.

[Compatible models] YAMAHA
FX CRUISER HO (2012-2021)
FX CRUISER SHO (2012-2014)
FX HO (2012-2021)
FX SHO (2012-2014)
FX CRUISER SVHO(2014-2021)
FXSVHO(2014-2021)

Exhaust air can flow better and performance will improve.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

【Applicable Models】
RXT/GTX/Wake Pro/FishPro Trophy/Explorer Pro (ST3) models from 2023 onwards

Required when installing a RIVA Free Flow Exhaust Kit, RIVA Rear Exhaust Kit, or RIVA Dual Rear Exhaust Kit.

【Please note】
・If marked "Out of Stock" or currently out of stock, please allow time for preparation.
・As this is an internationally sourced product, cancellations, returns, and exchanges are not accepted after an order has been placed.

CYLINDER HEAD GASKET

SEA-DOO genuine part number (OEM): 420950772 etc.

●Cylinder head gasket for SEA-DOO 1630 for ACE

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is No. 1 in the second photo.

【Compatible models】SEA-DOO
RXT-X 325('24-)
RXT-X 300('20-)
GTX LIMITED 325('25-)
GTX LIMITED 300('20-)
WAKE PRO 230('20-)
GTX230('20-)

● Pro Series Water Box improves horsepower and performance by reducing exhaust restriction and back pressure. Developed in a flow bench, our water box features radial exhaust tubes and end caps for optimal exhaust flow. Its innovative short design allows supercharger service without removing the exhaust system. High-strength aluminum construction and precision welding ensure it can withstand backfires and overheating. Powder-coated for corrosion protection. Includes detailed installation instructions in English.

Main Features
Up to 10hp increase on modified crafts.
Beaded tube flanges securely hold couplers.
Radial exhaust tubes and end caps.
Powder-coated for corrosion protection.
Fits all 2020+ models with 1630 engines.

【Please note】
・If marked "取り寄せ" (backorder) or out of stock, it will take time to prepare.
・As this is an overseas order product, cancellations, returns, or exchanges after ordering are not accepted.

【Compatible models】SEA-DOO
RXT-X 300('18-'21)
GTX LIMITED 300('18-'21)
WAKE PRO 230('18-'21)
GTX230('21)

Improves engine performance by bypassing the resonator after the water box and directing exhaust rearward.

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

The billet knob eliminates the Phillips screws that secure the conventional engine cover.
Provides quick and easy hand access to the engine for maintenance/cleaning.

Just a direct replacement for the original steel mounting screws securing the corrosion-prone engine cover.
It installs in minutes and is a great-looking, practical upgrade.

- Provides quick and easy access to the engine during maintenance/cleaning.
- You can easily dress up your engine room.
-Easy to turn by hand billet aluminum knob made of threaded stainless steel shaft.

*If the screw part comes loose from the head body, please use an adhesive such as Locktite to attach it.

【Compatible Models】All Yamaha 1.8L HO, SHO, SVHO Engines
*Not compatible with 1.9L engines

The billet oil cap is a direct replacement for the conventional resin oil cap with a corrosion-resistant aluminum oil cap.
It can be installed in minutes, providing a practical and attractive upgrade.
Easily dress up your engine bay.

■O-ring included
■Durable 6061 billet construction

[Adaptation]
UL15012 KEIHIN Carburetor [Photo: Right]
UL15013 MIKUNI carburetor (*) [Photo: left]
(*) Cannot be used with genuine SBN40.

●The throttle becomes lighter and reduces fatigue.

[Compatible models] KAWASAKI SXT series ULTRA series
ULTRA310X/310LX/310R/310SE
ULTRA300X / 300LX /
ULTRA260X/260LX
ULTRA250X
ULTRA LX
STX12F / STX15F / STX 160X / 160LX

*For the SX-R series and X-2 series, the following products are compatible.
*Product number: UL010 / UL14020

3-piece construction: base plate, spacer, and face disc.
Anodized exhaust cover. Creates a stylish rear view.
Machined aluminum specification with excellent strength and corrosion resistance.
A dress-up item with a wide variety of colors.

[Kit contents]
Base plate x 1,
Spacer x 1,
Face disk x 1,
Mounting bolts: M6-10 (button) x 3,
M6-28 (cap) x 3

[Compatible models] KAWASAKI
New 1500SX-R
800SX-R
800X-2
STX900

*For the ULTRA series and STX series, the following products are compatible.
*Product number: UL14010, UL011, UL14001

Made of aluminum A6061 with excellent strength and corrosion resistance, this cover is chemically polished anodized and has an excellent design.
■JJSF certified parts

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

[Applicable] Hose outer diameter Φ15.8mm

[Application] To prevent the hose from coming off [Material] Clamp: All stainless steel, Body: Aluminum

We will make your hose look stylish.

JL80052BL Blue
JL80052RD Red
JL80052BK Black
JL80052PU Purple
JL80052SL Silver

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.