Collection: Boating Supplies

DF2

Lightweight, minimal engine with high functionality and ease of use
Equipped with a built-in 0.9-liter fuel tank. Its compact and lightweight (14kg) design makes it easy to handle, transport, and store. This compact body packs high functionality and maneuverability, including a highly efficient water-cooling system, a twist-grip throttle, and a large carrying handle.

Key Features

■ Durability & Reliability

Suzuki Anti-Corrosion Finish

Feature: Protects aluminum exterior parts by creating a strong bond between a special protective film and the aluminum surface.

Benefit: Enhanced corrosion resistance improves overall engine durability.

■ Convenience & Comfort

OHV 4-Stroke Engine
Equipped with a highly efficient single-cylinder OHV 4-stroke engine. The 1.49 kW (2 PS) of power produced by its 68 cm3 displacement makes it ideal for powering small inflatable boats and tenders. It boasts high functionality, including a reliable water-cooling system, smooth and quiet operation, a 1-liter built-in fuel tank that allows for approximately one hour of full-throttle operation, and a battery-free recoil starting system.

Convenient Features
Equipped with a large, integrated carrying handle for easy gripping. This makes tilting up and carrying the engine easy. Additionally, the oil level indicator on the side of the engine allows for easy checking of the oil level.

Excellent Maneuverability
Features a twist-grip throttle, 360-degree full-turn steering, and F-N (forward-neutral) shifting for precise control. The emergency stop switch, which stops the engine if the cord wrapped around your wrist detaches from the switch, is mounted on the handle so that the cord does not get in the way when rotating the main unit to steer.

Specifications

• Engine display has changed from "PS/rpm" to "kW/rpm". Values in parentheses are reference values in the old unit.
• All models come with pre-delivery inspection.
• Specifications are subject to change without notice.

Genuine Honda outboard engine part.
This is a replacement part for when the rope breaks.
We recommend carrying a spare in case it breaks while at sea.

Genuine Honda outboard parts.
We recommend replacing this part when replacing the propeller.

Genuine Honda outboard engine parts.
We recommend replacing this part when replacing the propeller, etc.

*Shear pin (58131-ZV0-000) and cotter pin (94201-30402) are not included.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

Please select your desired prefecture type.

● JCI Compliant (Mandatory Equipment for Small Vessels)
● Contents: 2 pieces per set
● Size: Approx. 100 mm (width) x Approx. 80 mm (height)

■Advance Plus / Entry Set
Honda's BF2 series outboards, previously manufactured overseas (BF2DH), are now produced in domestic factories and reintroduced as "BF2DK3".

【Set Contents】Boat + 3 items
★3m Inflatable Boat (SV-IBA300)
・HONDA 2hp Outboard Motor (BF2DK3-SCHJ)
・HONDA Engine Oil 1L (08238-99951)
・Outboard Motor Stand (JP-HR001)

■Model without preliminary inspection
■An inflatable boat that does not require a license or boat inspection when equipped with a 2hp outboard motor.
■The transom is 50mm higher than standard, allowing for greater speed with the same horsepower.
■Comes with one bench mat to decorate the aluminum bench.
※The color of the bucket in the product image is for illustrative purposes only, and you cannot specify the color.

【Boat Specifications】
■Material: PVC
■Capacity: 4 people
■Load Capacity: 500kg
■Overall Length x Overall Width x Tube Diameter: 300 x 150 x 42cm
■Inner Length: 215cm
■Inner Width: 73cm
■Total Weight: 34kg
■Bottom Type: High-pressure air floor
■Max Horsepower: 10HP
■1-year warranty included

【Standard Accessories】7-piece set
Aluminum oars x 2 (one pair),
Carry case,
Foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

【Notes on Outboard Motor Stand】
※The outboard motor stand requires assembly.
※The plate color of the transom holder may vary depending on the time of arrival. Thank you for your understanding. 

【Delivery】
Shipping costs for delivery to Okinawa Prefecture will be quoted separately.

Very convenient for maintenance and storage of outboard motors.
When not in use, it can be folded and stored compactly.

●Material: Steel (black paint)
●Applicable horsepower: Up to 5 horsepower class of 4st outboard motor

●Size: width 540 x depth 640 x height 1000mm
●Outboard motor fixing plate dimensions: width 46 x height 11.5 x thickness 3.5cm
●Height from the top of the outboard motor fixing plate to the ground: Approximately 89.5cm
●Body weight: Approximately 6.0kg

【please note】
*This product requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

NGK Spark Plugs for HONDA Outboards - DR (Heat Range) HS Series
【DR5HS Compatible Models】BF8A/BF8M, BF9.9A
【DR6HS Compatible Models】BF15A

●Sold Individually
*Image is for illustration purposes only.

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

●Teardrop-shaped air fender.
●Thick-walled with reinforced ribbed holes for rope attachment, making it durable and suitable for use as a course buoy when inverted.
●Easily inflatable with an air compressor or air gun.

【Product Specifications】
■Size: Diameter / Overall Length / Eye Diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm / 590mm / 25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【Please Note】
Air inflation nozzle is not included.
※If you require an air inflation nozzle, please purchase the separately sold item [Part No.: 97561].
※Products are delivered deflated.

■ No preliminary inspection model
■ An inflatable boat that does not require a license or boat inspection if equipped with a 2-horsepower outboard motor.
■ The transom is 50mm higher than usual, allowing for greater speed with the same horsepower.
■ Includes one bench mat that can be used to decorate the aluminum bench.
* The color of the bucket in the product image is for illustrative purposes only and cannot be specified.

【Boat Specifications】
■ Material: PVC
■ Capacity: 4 people
■ Load capacity: 500kg
■ Overall length x Overall width x Tube diameter: 300 x 150 x 42cm
■ Internal length: 215cm
■ Internal width: 73cm
■ Total weight: 34kg
■ Bottom type: High-pressure air floor
■ Maximum horsepower: 10HP
■ Number of air chambers: 3
■ 1-year warranty

【Standard Accessories】7-piece set
Aluminum oars x 2 (one pair),
Carry case,
Foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

[Product specifications]
■Type: Recessed type
■Material: Stainless steel
■Total length: 220mm
■Holder inner diameter: 41mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.
...
■With base gasket integrated rubber cap

This is a stainless steel rod holder made by Atwood.
Comes with a UV-resistant cap to prevent water from entering.

Made by ATTWOOD

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]
■Material: Made of reinforced vinyl
■Diameter: Approximately 20cm

●Multi-use float that can be used as a marker buoy or fender.
●This buoy is ideal for setting up courses for water skiing, wakeboarding, personal watercraft, etc.
●Made of marine grade reinforced vinyl, the same as commonly used air fenders,
It is less susceptible to deterioration due to UV rays.

●Three fluorescent colors that are highly visible even on water.
●It is a product that does not easily fade even after long-term use.

【please note】
Air injection nozzle is not included.
*Please purchase the air injection nozzle (product number: 97560) separately.

【Product Specifications】
■New Standard Compliant Model/TYPE: A
■Applicable Weight: 40kg or more. Can be used for children.
■Initial Buoyancy: 7.5kg
■Waist Size: Up to 105cm
■Material: (Body) Polyester, (Buoyancy Material) Oil-resistant foamed polyethylene

This is a fixed-type life vest that boasts absolute safety.
Because it is worn like a vest, it is less likely to come off in the event of falling into the water.
The front closure is zippered.

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

[Product specifications]

■Size: Diameter/Total length/Eye diameter
F-1: 150mm /640mm /18mm
F-2: 191mm /635mm /22mm
F-3: 208mm/635mm/22mm
F-5: 279mm /762mm /24mm

●Polyform's air fender and F fender are extremely strong fenders.
●The eye part is reinforced with thick rubber, making it extremely durable.
●Can withstand the high pressure of not only small ships but also large ships.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

■A triple rod holder for wall mounting.

■Equipped with holes for convenient storage and organization of knives, pliers, fishing tackle, etc.

■By using UV-resistant polypropylene as the material, there is less deterioration due to ultraviolet rays and excellent weather resistance.

■Size: Height 305 x Width 320 x Depth 65mm

■Holder inner diameter: 45φ

■Assembly type

■Mounting screws included

●A freely bendable bellows hose that connects the bilge pump and the Suruhal.

●Lightweight corrugated hose that does not collapse even when bent when handling.

●Can be easily cut with a cutter.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 100cm
■Hose diameter: 19.0mm

●Use the outboard motor cleaning flusher by inserting the black rubber part into the cleaning hole.

●With adapter for hose connection

■A brass drain plug that is indispensable for draining water from boats and bilges.

■Drain plug and base set

■Thread part standard: 1/2 inch NPT

■Base external size: approx. 50mm

*The center mounting hole of the base is approximately 26mm, and the center depth of the mounting surface is approximately 12mm.

●This is Seaflo's manual bilge pump.

●Can be activated using a switch panel or float switch (sold separately).

●Equipped with a removable strainer, so there is no chance of sucking in large particles. Also, cleaning the pump is easy by removing the strainer part.

●Flow rate: 1100GPH (69.3 liters/min)

●Power supply: DC12V/5.0A

●Compatible with 1-1/8" (28.5mm) inner diameter hose

●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.

[Disclaimer]
*Color may vary depending on shipping time. please note that.

SUZUKI outboard motor protection anode equivalent to genuine product number "55320-95311"
■1 set of 3 pieces

[Material] Anti-corrosion zinc
[Compatibility] Used in: SUZUKI outboard motor 4-stroke model

●Bracket: DF9.9/15(-'00)

- Clamp bracket: DF25/30 (3 cylinder), DF40/50, DF40A/50A/60AQ specifications (-'14)

●Extension case: DF60/70 (Transom X specification only)

SUZUKI outboard motor protection anode equivalent to genuine product number "55320-95311"

[Material] Anti-corrosion zinc
[Compatibility] Used in: SUZUKI outboard motor 4-stroke model

●Bracket: DF9.9/15(-'00)

- Clamp bracket: DF25/30 (3 cylinder), DF40/50, DF40A/50A/60AQ specifications (-'14)

●Extension case: DF60/70 (Transom X specification only)