Collection: Best Selling Products

Stainless steel ball mount with O-ring (SRX-071) to reduce rattling noise during towing.
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Processing may be required due to misalignment of hole positions caused by individual differences.

【Precautions when ordering】
*Please provide your "car model" so that we can engrave the class.
*Cancellations, changes, and returns will not be accepted if the model confirmation result is not a mismatch.

【Information】
Solex ball mounts are available in matte (SRX-123), mirror finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your precious boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates even large, reinforced ratchets.
Made from the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt has been set to the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1 piece
■Material (main body): Chloroprene
■Attachment method: Velcro

【Please note】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
We cannot accept exchanges or returns other than for product defects.

Trailer parts Boat trailer Lashing belt Wetsuit fabric

Compatible with Lexus LX Modelista Aero late model (H29.8 minor change or later)

[Compatible model] URJ201W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

[Traction force] C
[Ball mount] B-7
[Installation difficulty] ★☆☆☆☆
Compatible with Modelista Aero for late models (H29.8 minor change or later)

[Stainless steel hitch (SHC)]
Main bar, accessories (ball mount, hitch ball, detachable pin) made of stainless steel

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero late model (H29.8 minor change or later)

[Compatible model] URJ201W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

[Traction force] C
[Ball mount] B-7
[Installation difficulty] ★☆☆☆☆
Compatible with Modelista Aero for late models (H29.8 minor change or later)

[Steel/New Hitch (NHC)]
Main bar (oval type) steel
All accessories (excluding ball mount) are made of steel.

【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero late model (H29.8 minor change or later)

[Compatible model] URJ201W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

[Traction force] C
[Ball mount] B-7
[Installation difficulty] ★☆☆☆☆
Compatible with Modelista Aero for late models (H29.8 minor change or later)

[Half stainless steel/combi hitch (CHC)]
The main bar is made of steel
Accessories (ball mount, hitch ball, detachable pin) are made of stainless steel.

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero for earlier models

[Compatible model] URJ201W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Compatible with Modelista Aero for earlier models
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero for earlier models

[Compatible model] URJ201W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Compatible with Modelista Aero for earlier models
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be shipped by sea.

Compatible with Lexus LX Modelista Aero for earlier models

[Compatible model] URJ201W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Compatible with Modelista Aero for earlier models
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Hydraulic Surge Brake for Disc Brakes
■Ball Size: 2 inch compatible

※For drum brakes, see part number: ST-148-01

For drum brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For disc brakes, part number ST-148-02

For ST-004 and ST-021 hubs.

Size: W1/2-20

●For trailer installation. Comes with bolts. *Type with mounting holes on both left and right sides.

■Size: 156mm on one side
■Left and right screw pitch: 110mm

Hub and Bolt Set
■For 12-inch wheels with wide tires
■5-hole PCD 114.3, offset +0

*Bearings and oil seals are not included. (Sold separatelyPart number: ST-006)

[Request and Notes when Ordering]
*Please provide the following trailer information when ordering. (Model, year, chassis number)
*This information will be used to confirm compatibility with the manufacturer when procuring the product.
*For details, please refer to the image "Request when ordering".

[Disclaimer]
*The color of the bolts may change depending on the arrival time.

■ Hitch ball diameter: 2 inches
■ Mounting frame width: Compatible with 75mm (inner dimensions: width 76mm x height 50mm)
■ Material: Plated steel

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

This bracket is compatible with both steel and aluminum wheels and can be mounted anywhere on the trailer.

【Requests and Precautions for Ordering】
*Please provide the following trailer information when ordering. (Model, Year, Chassis Number)
●Mounting Position: Select from side frame (45x75) or tongue (75x75)
●Model
●Year
●Chassis Number
*This information will be used to confirm compatibility with the manufacturer when ordering the product.
*For more details, please refer to the image "Requests for Ordering."

This bracket is compatible with both steel and aluminum wheels at any position on the trailer.

【Requests and Precautions When Ordering】
*Please provide the following trailer information when ordering: (model, year, VIN)
●Mounting position: Select from side frame (45x75) or tongue (75x75)
●Model
●Year
●VIN
*This information will be used to confirm compatibility with the manufacturer when ordering the product.
*For more details, please refer to the image "Requests When Ordering."

●Foldable, invertible, large diameter hole

■Wheel size: 8 inches (20.3 cm)
■Maximum load: 679kg

Protector only.
●A bearing protector that allows you to fill the hub with grease from the grease nipple without removing the dust cap.

●Marine trailers are often submerged in seawater, etc. with their hubs, so constant maintenance such as replenishing grease is required to protect the bearings. This protector is very convenient.

■Material: Stainless steel
■Applicable hub cap size: 50.8mm

・Foldable double casters

Keeps the trailer level when parked, and is convenient for driving and moving the trailer. The double tires also provide stability.

●Foldable.

■Wheel size: 6 inches (15.2cm)
■Maximum load capacity: 453kg
Keeps the trailer level when parked, and is convenient for driving and moving the trailer.

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

PRIUSα 40 Series

Compatible Models: DAA-ZVW40W /41W (Not compatible with Touring Selection)

First Registration: May 2011 ~

Towing Capacity: C (750kg or less)
Estimated Installation Time: 3 hours

Stainless Steel Type-2 (Half Stainless Steel Type)
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish yet affordable hitch member with a stainless steel cross member, which is the most visible part.

Set Contents:
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Connection tap / High-tension bolts for hitch installation

Regarding the Product:
● All hitch members are made-to-order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on car model and material.
● Please note that some materials and types are made-to-order, so cancellations and changes after ordering are not possible.
● For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

Disclaimer:
・ Please confirm compatibility before placing an order. Please refrain from compatibility checks after placing an order.
・ The photos are examples, and the installation method and shape vary depending on the car model. In addition, processing may be required on the towing vehicle side, so please contact us for details.
・ Returns and exchanges are not possible for made-to-order products.

Regarding Delivery:
Delivery to Okinawa Prefecture will be quoted separately.

Prius α 40 Series

[Compatible Models] DAA-ZVW40W /41W *Touring Selection not applicable

[First Registration] May 2011 ~

Towing Capacity: C (750kg or less)
Estimated Installation Time: 3 hours

[Steel (Steel Type)]
Tight hitch basic type.

[Set Contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Solderless tap / High-tension bolts for hitch installation

[Regarding Products]
● All hitch receivers are ordered upon request. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
● As these are made-to-order products, cancellations and changes after placing an order are not possible.
● For some vehicle models, we may ask you to fax your vehicle inspection certificate for fitment confirmation.

[Disclaimer]
・Please confirm compatibility before placing an order. We kindly request that you refrain from inquiring about compatibility after placing an order.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As these are made-to-order products, returns and exchanges are not possible.

[About Delivery]
Shipping costs to Okinawa Prefecture will be estimated separately.

Toyota Land Cruiser PRADO 150 Series Modellista Early Model
*Rear skirt cannot be installed.

[Compatible Vehicle Models] CBA-TRJ150W, CBA-GRJ150W

■Towing Capacity 750kg
■Mount Slant Type Low
■Hitch Ball Short Ball
*Bolt-on installation
*Compatible with 50mm square mount

[Steel (Steel Type)]
Tight Hitch's basic type.

[Set Contents]
Steel Hitch Ball / Steel Ball Mount / Steel Ball Mount Lock Key / 6-Core Wire / Vehicle-Side Electrical Wiring Connector / Wiring Tap / High-Tension Bolts for Hitch Installation

[Regarding the Product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●As these are completely build-to-order products, cancellations and changes after an order has been placed are not possible.
●For some vehicle models, we may ask you to FAX your vehicle registration certificate for compatibility confirmation.

[Disclaimer]
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・Photos are examples; installation methods and shapes vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As these are made-to-order products, returns and exchanges are not possible.

[About Delivery]
Shipping costs for delivery to Okinawa Prefecture will be quoted separately each time.

Applicable Grades: Alphard (S), Vellfire (Z) 20 Series with large bumper

Applicable Vehicle Models: DBA-ANH20W/25W, DBA-GGH20W/25W

First Registered: May 2008 - January 2015

*Drilling required
Towing Capacity: C (750 kg or less)
Estimated Installation Time: Approx. 5 hours

Stainless Steel Type-2 (Half Stainless Steel Type)
All parts except for the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with a stainless steel cross member, which is the most visible part.

Set Contents:
Stainless steel hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wiring tap / High-tension bolts for hitch installation

Regarding Products:
●All hitch members are made to order (estimated delivery time is about 5 days to 2 weeks*). *Varies depending on car model and material.
●Please note that cancellations and changes to orders are not possible for certain materials and types that are made-to-order.
●For some car models, we may ask you to fax your vehicle inspection certificate for fitment confirmation.

Disclaimer:
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples, and the installation method and shape may vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

Regarding Delivery:
Shipping costs to Okinawa Prefecture will be quoted separately each time.

RX450h

[Compatible model] DAA-GYL15, AGZ
[First registration] H21.1~
[Towing capacity] C (750kg or less)
[Estimated installation time] Approx. 5 hours
*Rear under cover cannot be used

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wire tap / High-tension bolt for hitch installation

[Regarding the product]
●All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on the car model and material.
●As this is a completely custom-made product, cancellations and changes after ordering are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

[Disclaimer]
・Please confirm compatibility before ordering. We cannot confirm compatibility after an order has been placed.
・Photos are examples, and the installation method and shape vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a custom-made product, returns and exchanges are not possible.

[Shipping information]
・Due to the shape of the product, it cannot be combined with other products.
・Basically, it will be shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will take 7-10 days after shipping by sea.

[About delivery]
Shipping costs for delivery to Okinawa Prefecture will be estimated each time.

[Application] Ideal for locking 2 to wire
An indispensable item for installing seals, grips, etc.

■1 piece
■Nut only

12×1.25p
Socket size: 21mm

[Ordered products]

■Roller width: 220mm
■Bracket dimensions: 195x120x168mm (width x height x depth)
■Material: Steel

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

■Compatible with: 5 holes for Adele

■Size: PCD114.3mm, hub bolt M12, pitch 1.25

[For orders]
Vehicle inspection is required when ordering.

■Suitable for: Small, regular cars 5 holes

[For orders]
Vehicle inspection is required when ordering.

■Compatible with: Light double R 2002~ 5 holes

[For orders]
Vehicle inspection is required when ordering.

●Width: 265mm
●Material: ABS
■Sales unit: 1 piece (2 pieces needed for left/right replacement)

0503-06 Air fender (for 1 wheel)

■Size: 78x170mm (length x width)

A convenient bracket that can neatly fix 50 square pipes.

■Inside: approx. 55mm
■Mounting hole pitch: Approx. 63mm (center to center)

■Material: Stainless steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

The height and front and rear positions of the rollers can be adjusted to suit the hull.
Compatible with single boats of each manufacturer.
It is designed to be fixed by co-tightening with the rail and to have the optimal rail width for single boats.

■Size: 80x25mm (diameter x thickness)
■Set of 2