Collection: Best-selling products

■ No preliminary inspection model
■ An inflatable boat that does not require a license or boat inspection if equipped with a 2-horsepower outboard motor.
■ The transom is 50mm higher than usual, allowing for greater speed with the same horsepower.
■ Includes one bench mat that can be used to decorate the aluminum bench.
* The color of the bucket in the product image is for illustrative purposes only and cannot be specified.

【Boat Specifications】
■ Material: PVC
■ Capacity: 4 people
■ Load capacity: 500kg
■ Overall length x Overall width x Tube diameter: 300 x 150 x 42cm
■ Internal length: 215cm
■ Internal width: 73cm
■ Total weight: 34kg
■ Bottom type: High-pressure air floor
■ Maximum horsepower: 10HP
■ Number of air chambers: 3
■ 1-year warranty

【Standard Accessories】7-piece set
Aluminum oars x 2 (one pair),
Carry case,
Foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

■Medium type
■With 3/4 flange
■Size: Total length 130mm x outer diameter 30mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

●Grip that does not require bonding and is very popular in America.
●It is a type that does not use adhesive for installation and is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

■Heat foam plastic frame
■100% UV protection mirror lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With hard case
■Frame size 16.0x5.0cm

【Note】
This design does not float on water.
The design of the back strap may vary depending on when it arrives.

■Lens color: Gray smoke lens

■Heat press foam plastic frame
■100% UV protection polycarbon lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With mesh soft case
■Even if you drop it, it will float on water, so you don't have to worry about it.
■Frame size 16.0x5.0cm

The material used blocks over 99% of harmful UV rays, and the slightly thin fabric is soft, stretchy, and fits snugly to the body, making it extremely comfortable to wear.
Rash guards are an essential item that not only protects children's skin from harmful UV rays, but also protects them from abrasions, jellyfish, etc.
You can also coordinate the entire outfit with the hats, rash guards, and shoes sold in the same series.

■ Rush pants
The stretchy body-fitting material is not stiff and provides excellent athletic performance.
Recommended for water play such as swimming in pools, sea bathing, and baby swimming.
The fabric is a little thicker (80 oz) than regular rash guards, making it more durable. The inside front and crotch area are made of soft, fine inner mesh to prevent chafing. The longer length helps prevent injuries and sunburn on your thighs.

[Material] 88% nylon, 12% polyurethane

[Size] 100cm.120cm.140cm.150cm

*Accessories worn by the child models for image photos are not included.
*As this is a special offer item, returns and exchanges are not accepted.

In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

■ Suitable height size S: 110-130cm
M:120-140cm
L:130-150cm

*Accessories worn by models for image shoots are not included.

[Caution] Not applicable to legal equipment for small boats. This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Girls Elementary School Swimming

Since it's a folding and opening/closing type, you can insert the hanger into the wetsuit through the neck opening while it's folded, then set it.
The thickness of the hanger creates space inside the wetsuit, allowing for better ventilation and faster drying.
It also has a structure that accelerates wetsuit drying without leaving hanger marks.
Smooth attachment and detachment with simple operation, and one-touch maneuverability focused on "ease of use"
allows for smooth attachment and detachment even with neck-entry wetsuits.

■Made in Japan

■Materials: Main body: PP / Hook: Aluminum

The hook, which bears a heavy load, is made of highly durable and corrosion-resistant aluminum.
The extra-thick 6mm aluminum hook firmly holds wetsuits in various environments such as beaches and home balconies, and is highly resistant to corrosion from seawater.
Furthermore, it is a "strong" hanger with a wider base at the arms.
The double effect of concave grooves (to drain water) and air vents (holes) enhances quick-drying!

【Please note】
※When removing, be careful not to pinch your fingers.
※This product is exclusively for wetsuits. Do not use it for other purposes.

【How to store your wetsuit】
To slow down the deterioration of your wetsuit as much as possible, proper storage is important.
"Salt" and "direct sunlight" are the causes of rubber deterioration, so avoid these two when storing.
If you rinse the salt thoroughly and dry it in a cool, shaded place, the deterioration speed should be suppressed.
Also, when storing a wetsuit, if you fold it, the creases will flatten and won't return. Store it by hanging it on a hanger without folding.

Surfing Bodyboarding Wakeboarding Wakesurfing KiteboardingFlyboarding Diving SUP Windsurfing KayakingCanoeing Marine Sports

Unlike regular cotton briefs, these seamless boxer briefs have minimal seams and protrusions, minimizing any unevenness caused by stitching and providing an ultimate body fit.
They are recommended as underwear or as an inner layer for wetsuits and board shorts.

"Outdoor Products" was founded in Los Angeles, USA, in 1973.
Their daypacks became an iconic item for the brand, with their excellent design and reasonable price making them popular with a wide range of people worldwide, regardless of gender or age.
Their underwear is also recognized for its diverse and high-quality designs, rivaling their daypacks, and has become a popular item for the brand. The playful designs and rich color variations are simply enjoyable to look at. With excellent elasticity and water repellency, please consider using them as innerwear for wetsuits and board shorts.

■Material
　Polyester 70%
　Nylon 20%
　Polyurethane 10%

■Waist size guide
　M size 75-80cm
　L size 80-85cm

※For hygiene reasons, we do not accept returns or exchanges of underwear that comes into direct contact with the skin. Please be aware of this before placing your order.

These boxer shorts are a type of seamless boxer that is different from regular cotton briefs, and have almost no seams, minimizing the unevenness of the seams and providing an ultimate fit to the body.
It's OK to wear as underwear, but it's also recommended as an inner layer for wetsuits and board shorts.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
Underwear is also recognized for its diverse and high-quality designs, comparable to daypacks, and has become a popular item of the brand. The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin.

The main body and waist elastic are integrated, and the smooth texture will make you addicted to wearing it.
There is an outdoor logo on the front part of the waist.
It is highly elastic and fits gently to the contours of your body.
It's easy to cut corners when it comes to underwear, but with a glimpse of logos and printed designs,
Perfectly stylish! This is a recommended item that is perfect as a gift!

It has excellent elasticity and water repellency, so it can also be used as innerwear for wetsuits and board shorts.

■What are seamless boxer shorts?

These boxer shorts have no seams in the fabric, minimizing unevenness and providing an ultimate fit to the body.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
The underwear has been recognized for its diverse and high-quality designs that are on par with daypacks.
It has become a popular item of the brand.
The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*For hygiene reasons, we do not accept returns or exchanges of clothing that is worn directly on the skin.

●Main jet for CV cab and CDCV cab.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

【Compatible models】 KAWASAKI

Very convenient, as it floats even if dropped in water.
Please use according to your wrist size.

【Float Color】×【Lanyard Color】
A2126 Black × Silver
A2148 Red × Black
A2151 Blue × Silver
A2149 Green × Black

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

[Product specifications]
■Type: Recessed type
■Material: Stainless steel
■Total length: 220mm
■Holder inner diameter: 41mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.
...
■With base gasket integrated rubber cap

This is a stainless steel rod holder made by Atwood.
Comes with a UV-resistant cap to prevent water from entering.

Made by ATTWOOD

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]
■Material: Made of reinforced vinyl
■Diameter: Approximately 20cm

●Multi-use float that can be used as a marker buoy or fender.
●This buoy is ideal for setting up courses for water skiing, wakeboarding, personal watercraft, etc.
●Made of marine grade reinforced vinyl, the same as commonly used air fenders,
It is less susceptible to deterioration due to UV rays.

●Three fluorescent colors that are highly visible even on water.
●It is a product that does not easily fade even after long-term use.

【please note】
Air injection nozzle is not included.
*Please purchase the air injection nozzle (product number: 97560) separately.

【Product Specifications】
■New Standard Compliant Model/TYPE: A
■Applicable Weight: 40kg or more. Can be used for children.
■Initial Buoyancy: 7.5kg
■Waist Size: Up to 105cm
■Material: (Body) Polyester, (Buoyancy Material) Oil-resistant foamed polyethylene

This is a fixed-type life vest that boasts absolute safety.
Because it is worn like a vest, it is less likely to come off in the event of falling into the water.
The front closure is zippered.

By replacing the hose,
This is an air pump with excellent cost performance that can be used for both intake and exhaust.
■3 types of adapters are standard equipment

When using on towing tubes, please use a foot pump or hand pump for finishing.

1. 24758: DC12V (Cigarette lighter plug)
■Voltage/Current DC12V/12A
■Air flow rate 280 liters/min
■Maximum pressure 0.05kg/cm2
■Continuous use time approximately 12 minutes

2. 24759: AC100V (outlet plug)
■Voltage/Current AC100V/1.8A
■Air flow rate 300 liters/min
■Maximum pressure 0.06kg/cm2-
■Continuous use time approximately 12 minutes

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

A jacket with a simple and universal design that uses a polyester body liner as the outer material.
The body also has a texture similar to a thin down jacket.

This item shows JETPILOT's attention to detail in detail, such as the left and right front welt pockets with zips and the contrasting design of the hoodie straps.

Although it is simple, it is a useful item as the main outerwear for styling.

■Actual size when laid flat (chest measurement/length)

M size: 120cm/62cm
L size: 125cm/64cm
XL size: 129cm: 67cm

*Please forgive any errors as the measurements are taken by our staff.

This is Annieversary model apparel with the original logo revived.
The brushed lining makes it a little looser, and the fabric isn't too thick, so it's perfect from fall to spring!
Round neck trainers with a simple design are popular among people of all ages.

■Poly/cotton outer body 320gsm fleece brushed lining type

■Actual product size (chest measurement/length)

S: 95cm/70cm
M:100cm/72cm
L:106cm/74cm
XL:116cm/77cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.

*American size, one size larger than Japanese size.

[As this is a special price item, we cannot accept returns or exchanges. ]

This is a support collaboration model with the Kawasaki logo.
The lining is satin quilted, giving it a heavy texture similar to that of a jacket.

■Material: Cotton

■Actual product chest measurement S: 100cm
M: 110cm
L: 120cm
*Please allow slight errors due to the actual size measured by our staff when placed horizontally.

[As this is a special price item, we cannot accept returns or exchanges. ]

These board shorts have a cool gradation line.
Due to the central waist strap design, only minor adjustments are required.
There is a zip pocket on the side

■Material: Stretch polyester

■Waist size
30 inches (80cm)
32 inches (85cm)
34 inches (90cm)
36 inches (95cm)
38 inches (100cm)

Board shorts surf pants saltwater pants beach swimming pool resort
Watercraft Wakeboard Surfing Flyboard
Kitesurfing Famous Brand Popular JET-PILOT America
Outdoor Marine Activities SURF WAKEBOARD SUP Paddle Board
Kayaking Canoeing Trekking River play Jet skiing

■Material: 92% Polyester, 8% Spandex
■Specifications: 1 right leg pocket

■Jetpilot Recommended Waist Sizes
　28 inches (74-78cm)
　30 inches (78-82cm)
　32 inches (82-86cm)
　34 inches (84-88cm)
　36 inches (86-90cm)
　38 inches (88-92cm)
*Please note that the suitable size may vary depending on the waist design.

■Actual Garment Measurements (Laid Flat)
28 inches: Waist 76cm, Total Length 49cm, Inseam 24cm
30 inches: Waist 80cm, Total Length 50cm, Inseam 25cm
32 inches: Waist 84cm, Total Length 51cm, Inseam 25cm
34 inches: Waist 90cm, Total Length 52cm, Inseam 25cm
36 inches: Waist 94cm, Total Length 54cm, Inseam 26cm
38 inches: Waist 100cm, Total Length 55cm, Inseam 26cm
*Please allow for slight measurement error by our staff.

Boardshorts, Surf Pants, Swim Trunks, Pool, Resort
Personal Watercraft, Wakeboard, Surfing, Flyboard
Kitesurfing, Famous Brand, Popular, JET-PILOT, USA
Outdoor, Marine Activities, SURF, WAKEBOARD, SUP
Paddleboard, Kayak, Canoe, Trekking, River Play
Jetski, Fishing, Boat

One Size Fits All

This hat is water-repellent, durable, and resistant to friction, making it suitable for both city and outdoor use. It can be folded and stored in a bag, making it very convenient to carry and store. When unfolded, it immediately returns to its original shape and can be used. It's also perfect for sun protection. This versatile hat can be used for both casual outings and outdoor adventures.

・Quick-dry fabric
・Lightweight and breathable
・Adjustable and removable chin strap
・Hidden inner pocket

Logo print wide brim outdoor marine sports water sports sun protection lightweight quick dry fishing black JPW74 74 JETLITE WIDE BRIM HAT

This is a jacket from the "VAULT" series, featuring a WHITE logo on a black body.
We recommend combining it with the long johns (JA22155) from the same series to create a matching set.

Made with 'Embossed Neoprene,' a stretchy and stress-free material,
it offers the ultimate comfort and the most enjoyable PWC riding experience.

■Approximate sizing (height, weight, chest, waist)
M: 170-175cm, 65-72kg, 95-100cm, 76-81cm
L: 175-180cm, 70-77kg, 100-105cm, 81-86cm

[Please note]
The model is wearing an item from the same series, but it is not the actual product for sale (Black White). It is displayed as a reference for styling.

360° stretch neoprene JETLITE foam is the lightest and most flexible foam. It has more air bubbles than conventional products, making it more flexible and movable, and is also lighter.

YKK lock zipper adopted

*This is a sports vest that can be used for wakeboarding, SUP, etc.
*JCI small special vessel inspection certification is not possible.

■Applicable waist circumference M:85-95cm
L:90-100cm
XL:95-105cm

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports vest Impact vest Neo vest Wet suit

This is ZAHRA KELL's signature model.
Stretch neoprene accommodates every movement of the rider.
This neoprene vest is flexible and soft to the touch, making it the perfect piece for active scenes.
The liner is made of fire fur material, which is perfect for women as it provides excellent heat retention.
The front zipper makes it easy to put on and take off.
This is a top-quality vest that is lightweight and flexible.

■ Chest size guide

M(10):85-90cm
L(12):90-95cm

*JCI small special vessel inspection certification not available*

Wakeboarding, Wakesurfing, Kiteboarding, Surfing
Bodyboarding, SUP, Paddleboarding, Flyboarding, Snorkeling, Trekking, Kayaking, Canoeing, Marine Sports, Marine Activities, Banana Boat, Windsurfing, WAKEBOARD SURF WATERTOY
Rubber boat ZUPBOARD sports vest Impact vest Neo vest
Wetsuits

Half-Finger Gloves

These gloves feature PVC molded protectors on the top of the fingers and back of the hand to reduce impact, and Lycra fabric on the joints and sides of the fingers for smoother movement.
The palm is made entirely of Clarino (durable synthetic leather), with double-stitched Clarino reinforcement in areas that rub against the grip, making these gloves both functional and highly durable.

■ Size Chart (Hand Width / Total Length)
(M) 21.5cm / 21.5cm
(L) 22.0cm / 22.0cm
(XL) 23.0cm / 23.0cm

*Please note that these are our flat measurements, so a slight error may occur. (US Standard Sizes)