Collection: All items

KAWASAKI
750SX
800SX-R
800X-2

●Lightweight flywheel weighing 800g.
●The response of engine revving and rotation return is improved, so acceleration from 0 to 1m is significantly improved, making it a must-have item at the start of a racing scene.
●Improved from previous products to increase durability.
●Compatible with CDI-10R/CDI-R power unit, and when installed at the same time, the pickup will be improved and the response will be linear with throttle work. The strength of the gear has also been increased.
●Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.

[Compatible models] KAWASAKI STX-R / Ultra150
[Specifications] Compatible with regular gasoline

This is a purely domestic CDI unit, and we have researched the engine characteristics of STX-R/Ultra150 to achieve the best ignition characteristics.
Easy to install and shortens the time to reach top speed from low speed.

[About installation]
Bolt on.
*Please set according to the engine specifications and driving conditions.

[Adaptation] 46mm to 48mm MIKUNI
[Quantity] 1 piece

This gasket has higher performance than the genuine product.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the gasket uses a metal material, so there is no tearing during maintenance!
Manufactured using a special manufacturing method, it has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

■Compatible with: JL81400 Beach tote tires only
(We do not know whether it is compatible with other products or products from other manufacturers.)

■Sales unit: 1 piece
■Material: Nylon
*This product only comes with a nylon cap.
*Please refer to the image for size. (Please use this as a guide as there are individual differences)

●Sold individually.

・Cool black reinforced wheel!
・Nylon bearing tires for Beach Totes.
・Can also be used with Factory Zero's jet launchers and jet banks.

【Product Specifications】------------------------------------------------
●Tire pressure: 0.8～1.0kg
●Tire width: 10 inches
●Shaft diameter: 25.4Φ
●Offset: 0mm
●Weight: 5.7kg
●Tire size: 18×9.50-8

【Product Contents】-------------------------------------------------
・Tubeless air tire ×1
・Black plastic rim ×1
・Nylon bearing ×2
・Nylon cap ×2

【Product Information】----------------------------------------
●Not eligible for combined shipping: To prevent scratches and damage, "combined packaging (combined shipping)" with other products is not possible.
●For multiple purchases: We will charge shipping per package, with 2 items per package, depending on the quantity purchased.
*Example: 1 item = 1 package shipping, 3 items = 2 packages shipping, 5 items = 3 packages shipping*

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

●Towing speed: 5km/h or less (suitable for towing buggies, etc.)
●Attachments: Bolts and special spacers

【please note】
Powered towing using this coupler is not a trailer, so it cannot be towed on public roads.
Towing speed: Please strictly observe the use at 5km/h or less. (Cannot be used on uneven roads even if it is less than the value on the left)
When bouncing, the instantaneous load is 2 to 3 times the weight, which can damage parts such as the axle shaft.

We also have the "JB104SUS reinforced axle shaft kit" for heavy boats.
If you are towing with power, we recommend replacing it.

●Contains 10 female terminals.

●Compatible with SEA-DOO [Genuine product number: 710000837 710000836].

[Quantity] 2 pieces
This is a pin blind seal.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

[Compatible models]
KAWASAKI 750(B)/800

An indispensable item for crank maintenance and racing scenes.

Made using the same material as the normal one and made it even stronger.
The balance of the crank is the best.
■Made in Japan

*With big end bearing and small end bearing sold separately.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

[Adaptation] KAWASAKI 310/300 series
ULTRA310X / ULTRA310LX (-'21) / ULTRA310R / ULTRA310X-SE
ULTRA300X/ULTRA300LX
(There is one extra wire when using 300)

*Not available for 250/260/LX series

[Product name] LIMITER CUT LIMITER CUT

You can release the speed limiter and experience the original top speed with simple connection and installation. Since the stock ECU is used as is, you can enjoy it easily. You won't lose cruise control functionality either.
■With instruction manual

【important】
●This product is planned and manufactured for competition purposes (especially closed races).
●We cannot guarantee any claims regarding the hull, engine, etc., so please be careful when using this product.
●Can be used in conjunction with the separately sold "JL23022 Speed ​​Limiter Cut ON-OFF Switch".

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

●Replacement terminal.
●Quantity: 2 pieces

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

FACTORYZERO Jet Launcher
[Compatible products] For J-1480, J-1480-4, J-1480-4X
[Size] The width from center to center of the pipe is 480 mm

The handle pipe has been removed, bent downwards, and angled, making it easier to load from underwater.
Factoryzero Jet Launcher Repair Parts

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

FACTORYZERO Optional item for jet bank manufacturers. Stronger than regular products by welding.

*Sold starting from 1 piece.
*If you are ordering one, please specify "left or right" when looking at the jet bank from behind.

[Product information]
●Cannot be bundled...In order to prevent scratches and damage, items cannot be shipped together (combined) with other items.
●Directly shipped product...This product is shipped directly from the manufacturer, so "cash on delivery" or "combined packaging (bundling)" is not possible.

●“Reinforced axle shaft kit” for heavy boats. 260mm.
●If you are towing with power, we recommend replacing it.

This is a JETPILOT wristband with Velcro fastening.
Use to secure the lanyard to your wrist.

■Volume: 420ml spray can

Excellent metal rust prevention

For loosening rusted bolts and nuts.
With excellent water displacement, it can be used for maintenance of motocross bikes and general vehicles after riding in the rain,
and for lubrication and rust prevention of various moving parts when delivering new vehicles.
It can also be used as a moisture repellent for battery terminals, spark plugs, starter motors, etc.

【Please note】
*Due to the nature of the container, we cannot ship to Okinawa Prefecture or remote islands in any prefecture.
*Due to the nature of the product, some items cannot be shipped together.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
After your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take some time. We will notify you of the delivery date as soon as it is confirmed.
Please place your order after understanding these points.

■Volume: 420ml spray can

Cleaner and polish wax.
Contains ultra-fine compounds.
Removes dirt and repairs minor scratches without adversely affecting dark-colored painted surfaces.
Also maintains a strong luster with high-quality silicone wax.

[Notice]
*Due to the nature of the container, shipping to Okinawa Prefecture and remote islands of other prefectures is not possible.
*Due to the nature of the product, some items cannot be shipped together.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
After your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.