Collection: Trailer hitch members/supplies

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Stainless steel SUS304

For tight japan hitch

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Since it uses an L-shaped cylinder, it is easy to attach and detach at the center of the hitch member, which tends to be narrow.

■Pin diameter: 16mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

When setting it in the connector, ensure that it is installed on the screw to prevent non-electricity.

[Quantity] 6 pieces 1 set

When setting it in the connector, ensure that it is installed on the screw to prevent non-electricity.

[Quantity] 6 pieces 1 set

●Tight Japan genuine product.

■Material: Black resin

●Tight Japan genuine product.

■Material: Aluminum

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm

The left and right lights flash alternately in red.

●Application: Flashlight
●Mounting screws are not included. Please prepare separately.
●Equipped with 20 LED lights
●Size: 101x50x26mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
If the light part is submerged in water, such as when a trailer is placed in water, water may enter the lamp and cause it to break.

■In addition to fixing the jet handle pole, you can also freely adjust the length with the stopper part.

■Length: 100cm

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.
The arm part is made of stainless steel and is resistant to rust, and the grip part is made of rubber for easy grip.

■Mountable bolt pitch: approx. 74-79mm
(Mounting hole center - center size: approx. 75mm)
■Bolt diameter: Approximately 8-13mm

【please note】
Only the coupler handle and other items are not included.
Mounting bolts are not included.

●A22mm B34mm C89mm D44mm E17mm
●Small roller attached to the end of the bow keel
●Made of hard rubber

●Attach to the tip of the hitch coupler to protect the towed vehicle from scratches.
● To install, just clip it onto the edge of the coupler.
●Made of rubber
●Coupler is not included.

■Size: Total length 180mm x 80mm
■Shaft diameter: Ф16.0mm

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

●Loop strap for Dutton PWC.
●Winch belt with small hook.
- Comes with a loop strap that is convenient for fixing the PWC without damaging it.

[size]
■Strap width: approx. 5cm, length: approx. 3.6m, stitch width: approx. 9.5cm
■Loop part: approx. 2.54cm, length: approx. 1.22m

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

[Product size]
■Total length (A): 283.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 245.0mm
*Accessories: End cap

[Product size]
■Total length (A): 235.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 194.0mm
*Accessories: End cap

[Product size]
■Total length (A): 136.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 99.0mm
*Accessories: End cap

■Slide width (A): 126.0mm
■Inner width (B): 306.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 255.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 206.0mm
■Depth (C): 163.0mm

■Slide width (A): 127.0mm
■Inner width (B): 128.0mm
■Depth (C): 103.0mm

This is the bracket required to secure the keel roller and attach it to the trailer.

■Slide width (A): 65.0mm
■Inner width (B): 112.0mm
■Depth (C): 103.0mm

■Roller diameter (A): 89.0mm
■Width (B): 194.0mm
■Shaft diameter (C): 16.0mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 80mm
●Total length 93mm
●Center shaft diameter 12.5mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 77mm
●Total length 69mm
●Center shaft diameter 12.5mm

Total length 180mm x width 75mm x shaft length 100mm.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm