Collection: PWC Accessories

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

Compatible with PWC 3 manufacturers
SEADOO <2015 and later models> Excluding SPARK Kawasaki, YAMAHA

The float is located on the life vest side to prevent the weight of the cord from swinging around.
When new, it will continue to remain buoyant even if left in a tank filled with calm water for a week.

■Size: Total length approx. 40cm, when extended approx. 1m30cm

【please】
*Before use, please check the cord for cracks and the crimped parts at any time.
*SD key registration is required, so please check with the dealer you purchased the hull from.
*This product is not compatible with the SD SPARK series.

*For Kawasaki and YAMAHA models, please select UFL2101, which is compatible with two manufacturers.

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your precious boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates even large, reinforced ratchets.
Made from the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt has been set to the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1 piece
■Material (main body): Chloroprene
■Attachment method: Velcro

【Please note】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
We cannot accept exchanges or returns other than for product defects.

Trailer parts Boat trailer Lashing belt Wetsuit fabric

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

【Compatible models】All SEA DOO models
【Material】Polished stainless steel

【Size】
・Mounting hole pitch: Approx. 44mm
・Screw part: M8 x 24mm
・Hook part: 136 x 87 x 40mm (width x height x depth)
・Weight: Approx. 345g

Luxurious mirror-finished stainless steel!
Replacing the cheap genuine hook with this one will definitely enhance the visual appeal!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

【Compatible models】KAWASAKI
Exhaust port diameter Φ50mm
ULTRA310LX / ULTRA310LX-S /ULTRA160 /ULTRA300 /15F('09-) /ULTRA250X('08) /ULTRA260X /ULTRA LX('09-)

★For the following models with an exhaust port diameter of Φ60mm, please use part number: JL14001.
STX series ('00-'07) *excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Stylishly enhances the rear exhaust.
●Made from machined aluminum (A6061) for excellent strength and corrosion resistance.
●A cover flange with chemical polished anodizing and superior design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

Exhaust nozzle for SE ULTRA310/300/260/250
This part adds a stylish touch to your exhaust outlet.

Exhaust nozzle for SE ULTRA310/300/260/250
This part is designed to give your exhaust outlet a stylish look.

Exhaust nozzle for SE 800SX-R / 800X-2
A part to style the exhaust port.

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

【Compatible models】YAMAHA
FX CRUISER HO (2019-)
FX CRUISER SVHO (2019-)
FX HO (2019-)
FX LIMITED SVHO (2019-)
FX SVHO (2019-)

This FX stern storage box, in addition to the FX's regular storage, provides ample storage capacity to carry everything you need for long rides on the water.
It offers a 50-liter capacity and boasts excellent design.

Molded from EVA foam, it offers excellent durability and weather resistance.
The mesh bottom allows for quick drainage.
There is a cut-out at the towing hook, so you can use the hook without removing the storage box.

■Side rod holders included (2)
■No tools required for installation!
■Optional (sold separately): FX cooler bag can be installed

※The hull and product images are for illustration purposes only.
※This product is not waterproof.

【Please check before ordering】
This product is a **manufacturer-ordered item (genuine parts)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

●A rod holder that attaches to the base of the BORIKA exclusive clamp mount (BK-FMCG).

●If you attach it to the base of the BORIKA exclusive clamp mount (BK-FMCG), you will be able to use 3 mounts.

BORIKA Clamp & Mount
It can be used interchangeably with rod holders, camera mounts, anchor locks, etc., sold separately.

●As a holder when traveling to a fishing spot, or as a rod holder at a fishing spot.

●Installation is completed by simply inserting the knob nut onto the grab handle. No tools required.

●The direction and angle of the rod holder can be changed.

●In addition to the rod holder, the clamp mount can be replaced with camera mounts, anchor locks, etc.

*Some models such as STX and Spark may interfere with the seat slightly.

[Compatible] For SEA-DOO SPARK
*Equivalent to OEM part number: 278002843

A lanyard that attaches to your vest
It is more reasonable than genuine parts.

【Compatible models】
SEA-DOO
RXT-X300 (2018~)
GTR230 (2020)

●Bolt-on, no drilling or other processing required.

●This is a spring-loaded reboarding step that improves usability for recreation and is convenient for reboarding from the water.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Due to immediate ordering from the manufacturer after your order is confirmed, cancellations or changes to order contents due to customer convenience will not be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

【Compatibility】
GTR230 (2020 onwards) / GTI130 (2020 onwards)

【Please read before ordering】
This product is a **manufacturer's取り寄せ商品 (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Furthermore, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We kindly ask for your understanding before placing your order.

【Compatibility】 GTR230 ('20-) / GTI130 ('20-)

●Convenient for storing small items within the large-capacity storage of 2020 and newer GTI hull models.

●A highly practical item that is easy to carry even after being removed from the watercraft.

【Please confirm before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer, so cancellations or changes to your order due to customer convenience will generally not be accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging these points.

[Compatibility] SEADOO RXT, RXT-X, GTX, and WAKE Pro (2018)

Upgrade hardware kit essential for using the LinQ TUNNEL BAG (Part No.: 860201740) in saltwater.
LinQ hardware kit includes highly corrosion-resistant stainless steel parts.
Easy and quick installation.

*Standard equipment for LinQ Cooler boxes.

[Please read before ordering]
This product is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, it is immediately placed with the manufacturer; therefore, cancellations or changes to the order are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Please read before ordering】
This product is a **manufacturer's ordered item (genuine part)**.
Once an order is confirmed, we promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

[Compatibility] SEA-DOO RXT, RXT-X, GTX and WAKE Pro (2018)

■2 pieces/set
※This is for one side. If you need 4 places (left and right), you will need 2 sets.

This is a necessary part for installing SEA-DOO genuine fenders (Part No.: 295100418).
Snap-In Fenders Installation Kit

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience will not be accepted in principle.
Also, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging this in advance.

【Compatibility】
RXT-X300, GTX-L300, WAKE Pro 230, GTX170/155 (2018 and later)

●Use this product for FISH PRO / GTX models without audio from 2018 onwards, or when the audio system is damaged.

【Please check before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this.

【Compatibility】
RXT-X300, GTX-L300, WAKE Pro 230, GTX170/155 (2018 and up)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the current required for proper charging time, preventing overcharging of equipment.

●Standard equipment on 2018 - GTX Limited300 models.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this.

【Compatibility】
SEADOO SPARK

●This is a spring-loaded reboarding step that improves usability for play and is convenient for reboarding from the water.

【Please check before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, it is immediately placed with the manufacturer. Therefore, cancellations or changes to the order are generally not accepted.
In addition, delivery may take time depending on the manufacturer's stock status. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after understanding these terms.

【Compatible models】
SEA-DOO SPARK 3-seater

※The ski pylon cannot be used for tubes, etc.

※Cannot be used with SPARK 2-seater.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience cannot be accepted in principle.
In addition, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

●This kit contains the necessary parts for installing the SEA-DOO genuine fender (Part No.: 295100418).

●Snap-In Fenders Installation Kit

●2 pcs/set

※This kit is for one side. If you need to install fenders at 4 points (left and right), you will need 2 sets.

【Compatibility】
●SEA-DOO iBR models 2017 and older (※Not required for SPARK.)

【Please read before ordering】
This is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, it is promptly placed with the manufacturer, so cancellations or changes to order contents due to customer convenience cannot be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
We kindly ask for your understanding and cooperation when placing an order.

■Set of 2
・Easy-to-attach and detach SEA-DOO genuine fenders
・Highly visible fluorescent orange body

When using these Snap-in Fenders,
the dedicated installation kit must first be installed on the hull. (Not required for SPARK)
●iBR models before 2017: Snap-In Fenders Installation Kit (Part No: 295100550)
●RXT, RXT-X, GTX and WAKE Pro (2018): Snap-In Fenders Installation Kit (Part No: 295100729)

【Please confirm before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we immediately place the order with the manufacturer, so cancellations or changes to the order content are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

2016 and up SPARK
【Note】
Not for use on hulls equipped with an RFID system (radio frequency digital encoded security system).
The product compatible with RFID systems is "278003400".

Genuine Safety Lanyard

【Disclaimer】
Prices may change without notice as these are genuine parts.

【Please check before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience will generally not be accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Thank you for your understanding and cooperation when placing an order.

Compatible with SEA-DOO RFID systems
(Wireless Digital Encoded Security System)

*Programming required after purchase.
Genuine Safety Lanyard

[Disclaimer]
As this is a genuine part, the price may change without prior notice.

[Please Read Before Ordering]
This product is a **manufacturer-ordered item (genuine part)**.
To ensure prompt ordering from the manufacturer after your order is confirmed, we generally cannot accept cancellations or changes to order details due to customer convenience.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please be aware of this before placing your order.