Collection: 新商品

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Applicable models] KAWASAKI *Excluding ULTRA 4 stroke (ULTRA310/300/260/250/LX)

About SEADOO boats and YAMAHA boats...
By installing and using the company's fuel filler (UL53005),
KAWASAKI "UNLIMITED billet fuel cap [UL030, UL036]" can be used

Machined aluminum

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

■Pattern: Diamond ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

Note: Adhesive is required for attachment.

■Pattern: Border ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

[Note] Adhesive is required for attachment.

【Manufacturer】VOLVO
【Car name】Volvo V90 Cross Country
【Applicable model】DBA-PB420
【Model year】H29.2～
【Applicable grade】T5AWD

【Type】STD
STD:Steel, LTD:Stainless steel, LTD II:Stainless steel

【Towing capacity】C
【Shape】F-1
【Processing】K-2
【Drilling】-
【Installation time】2.5 hours

【Regarding the product】
●All hitch members are made to order. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on car model and material.
●Due to the material and type, some products are completely custom-made, so please note that cancellations and changes cannot be made after ordering.
●For some car models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before ordering. Please refrain from confirming compatibility after ordering.
・The photos are examples, and the installation method and shape vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a custom-made product, returns and exchanges are not possible.

【Shipping information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, it is a direct shipment from the manufacturer, so cash on delivery is not possible.

*Cannot be shipped to a freight company's business office
*Delivery to corporations/companies, and limited to some private residences
In the following cases, we cannot accept delivery:
1. A room in an apartment complex
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate office
4. Cases where it is determined that there is a risk involved in the entry of the delivery truck
5. Other special circumstances where it is determined that delivery will be hindered

【About delivery】
Shipping costs for delivery to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】LAND ROVER
【Model】Discovery
【Compatible model number】LT56A/94A
【Year】H11.6～H17.4
【Compatible Grade】XS Plus

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】C
【Shape】R-1
【Processing】K-1
【Drilling】-
【Installation Time】 2 hours

【Regarding the Product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after placing an order are not possible.
●For some models, we may ask you to FAX your vehicle inspection certificate for fitment confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly request that you refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a build-to-order product, returns and exchanges are not possible.

【Regarding Delivery】
・Due to the shape of the product, it cannot be combined with other items.
・Basically, direct delivery from the manufacturer means payment on delivery is not possible.

*Cannot be shipped to a freight company's service center for pickup.
*Delivery limited to corporations/companies and some private residences.
In the following cases, delivery cannot be accepted:
1. An apartment in a multi-unit dwelling.
2. Religious corporations, Shinto shrines, Buddhist temples.
3. When it cannot be determined to be a corporate building.
4. When it is determined that there is a risk of a delivery truck being unable to enter.
5. When it is determined that delivery will be difficult due to other special circumstances.

【Regarding Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately.

Manufacturer: JEEP
Car Model: Cherokee
Compatible Model Number: 7MX
Year: H2.12～H11.12
Compatible Grades: Sport, Laredo, Limited

Type: LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

Towing Capacity: C
Shape: LTDⅡ
Processing: T-4
Drilling: -
Installation Time: 3 hours

About the Product:
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes after placing an order are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

Disclaimer:
・Please confirm compatibility before ordering. We cannot confirm compatibility after an order has been placed.
・The photos are examples; the installation method and shape vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As these are made-to-order products, returns and exchanges are not possible.

Delivery Information:
・Due to the shape of the product, it cannot be combined with other items.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

*Cannot be shipped to freight company sales offices.
*Delivery is for corporate/company addresses and some private residences only.
The following cases cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the building cannot be identified as a corporate office
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed difficult

Delivery to Okinawa Prefecture:
Shipping costs will be estimated separately.

【Manufacturer】JEEP
【Model】Grand Cherokee
【Compatible Vehicle Model】WH47/57
【Year】H17.7～H23.3
【Compatible Grade】WH47: Laredo, WH57: Overland 【Notes】Bumper interior modification, precautions when detaching bumper

【Type】STD
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

【Towing Capacity】C
【Shape】R-1
【Processing】D-2・3
【Drilling】-
【Installation Time】 2.5 hours

【Regarding the Product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made-to-order and cannot be cancelled or changed after an order is placed. We appreciate your understanding.
●For some vehicle models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask that you refrain from requesting compatibility confirmation after an order has been placed.
・The photos are examples; installation methods and shapes vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As these are made-to-order products, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer means cash on delivery is not possible.

※Shipping to freight company's business office is not possible.
※Delivery limited to corporations/companies and some private residences.
We cannot fulfill deliveries in the following cases:
1. An apartment in a multi-unit dwelling.
2. Religious corporations, Shinto shrines, Buddhist temples.
3. Cases where the location cannot be identified as a corporate building.
4. Cases where the delivery truck's entry is deemed to pose a risk.
5. Other special circumstances where delivery is deemed problematic.

【Delivery】
For deliveries to Okinawa Prefecture, shipping costs will be quoted separately.

Jumbo (4WD), Air Conditioner/Power Steering Special (4WD/2WD)
[Compatible Vehicle Models] EBD-S211P/EBD-S201P
[First Registration] Dec. 2007 - July 2010

Jumbo, Standard
[Compatible Vehicle Models] EBD-S500P (2WD) / EBD-S510P (4WD)
[First Registration] Dec. 2014 -

[STANDARD (Steel)]
Stylish black finish.

[Towing Capacity] A (Less than 500kg)
[Approximate Installation Time] Approx. 3.5 hours

[Set Contents]
Crossmember frame / Ball mount / Hitch ball 2 inch Φ / 7-pin sleeve receptacle (female) / Receptacle plate / 6-core cable (wiring 1.5m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolts / Cable ties
*Set contents and shape vary depending on the vehicle model.

[Regarding the product]
●All hitch members are made to order. (Estimated delivery is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Due to the material and type, some may be completely built to order, so please note that cancellations and changes after ordering are not possible.
●For some vehicle models, we may ask for a FAX of the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please confirm compatibility before placing an order. Please refrain from compatibility checks after placing an order.
・Photos are examples, and installation methods and shapes vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a built-to-order product, returns and exchanges are not possible.

[Shipping Information]
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

*Shipping to freight company's sales office is not possible.
*Delivery to corporations/companies and limited private residences
The following cases cannot be accepted:
1. A room in an apartment building
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk involved in the entry of a delivery truck
5. Other special circumstances where delivery is deemed to be hindered

[About Delivery]
Shipping costs to Okinawa Prefecture will be estimated separately.

【Manufacturer】DAIHATSU
【Model Name】Hijet Cargo
【Compatible Model Numbers】LE-S330V EBD-S321V/EBD-S331V EBD-S331W 3BD-S331V
【Model Year】H16.12～ (Dec. 2004~)
【Compatible Grades】Cruise Turbo, Deck Van (EBD-S331W), Deluxe SAIII (3BD-S331V) 【Note】Depending on individual vehicle differences, drilling may be required to enlarge the vehicle bracket. Cannot be installed on Atrai Wagon.

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】A
【Shape】F-1
【Processing】T-4
【Drilling】-
【Installation Time】2 hours

【Regarding the Product】
●All trailer hitches are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Some materials and types are made-to-order, so please understand that cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before ordering. We cannot confirm compatibility after an order has been placed.
・Photos are examples, and the installation method and shape may differ depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup.
※Delivery limited to corporations/companies and some private residences.
The following cases cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the location cannot be identified as a corporate building
4. Cases where it is judged that there is a risk of the delivery truck entering the premises
5. Other special circumstances where delivery is judged to be difficult.

【About Delivery】
Delivery to Okinawa Prefecture will be quoted separately for each instance.

【Manufacturer】 SUZUKI
【Model】 XBEE
【Compatible Vehicle Model】 DAA-MN71S
【Year】 H29.12~
【Compatible Grade】 HYBRID MZ, HYBRID MX 【Note】 For 4WD only

【Type】 STD
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

【Towing Capacity】 A
【Shape】 F-1
【Processing】 -
【Drilling】 2
【Installation Time】 2 hours

【Regarding the Product】
● All hitch members are order-made. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
● Due to the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible.
● For some vehicle models, we may ask you to FAX the vehicle inspection certificate for fitment confirmation.

【Disclaimer】
・Please confirm fitment before ordering. We ask that you refrain from fitment confirmation after ordering.
・The photos are examples; the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the product's shape, it cannot be combined with other items.
・Basically, direct shipment from the manufacturer, so cash on delivery is not available.

*Cannot be shipped to a freight company's service center for pick-up.
*Delivery is limited to corporate/company addresses, and some private residences.
In the following cases, delivery cannot be accepted:
1. An apartment in a multi-unit dwelling.
2. Religious corporations, Shinto shrines, Buddhist temples.
3. When it cannot be determined to be a corporate building.
4. When it is determined that there is a danger to the delivery truck's access.
5. When it is determined that delivery will be hindered by other special circumstances.

【About Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUZUKI
【Model】Hustler
【Compatible Model No.】DBA-MR31S
【Model Year】H26.1～H29.5 (Jan. 2014 - May 2017)
【Compatible Grade】A, G, G Turbo, X, X Turbo
【Note】2WD installation unconfirmed

【Type】STD
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

【Towing Capacity】A
【Shape】F-1
【Processing】D-3
【Drilling】2
【Installation Time】2.5 hours

【Regarding the Product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, the product may be made-to-order, so cancellations and changes after placing an order are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Please Note】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples; the installation method and shape vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Regarding Delivery】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipping from the manufacturer means cash on delivery is not possible.

※Cannot be shipped to a shipping company's service center for pickup.
※Delivery limited to corporations/companies and some private residences.
Delivery cannot be made in the following cases:
1. An apartment in a multi-unit building
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the location cannot be identified as a corporate office
4. Cases where the delivery truck's entry is deemed dangerous
5. Other special circumstances where delivery is deemed to be obstructed

【Regarding Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUZUKI
【Car model】Every
【Compatible vehicle model】DA64W（V）
【Model year】H17.8～H22.4
【Compatible grade】JP

【Type】STD
STD:Steel, LTD:Stainless steel, LTD II:Stainless steel

【Towing capacity】A
【Shape】F-1
【Processing】-
【Drilling】8
【Installation time】 2.5 hours

【Regarding the product】
●All hitch members are ordered. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, it may be made-to-order, so please note that cancellations and changes cannot be made after ordering.
●For some car models, we may ask you to FAX the vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before ordering. Please refrain from compatibility confirmation after ordering.
・The photo is an example, and the installation method and shape differ depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, payment on delivery is not possible as it is a direct shipment from the manufacturer.

※Cannot be shipped to a transportation company's business office.
※Delivery limited to corporations/companies and some private residences.
In the following cases, delivery cannot be accepted:
1. A room in an apartment complex
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other cases where delivery is deemed difficult due to special circumstances

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUZUKI
【Car model】Carry
【Compatible vehicle model】DA63T
【Model year】H17.8～H25.8
【Compatible grade】KC

【Type】STD
STD:Steel, LTD:Stainless, LTD II:Stainless

【Towing capacity】A
【Shape】F-2
【Processing】K-1
【Drilling】-
【Installation time】 2.5 hours

【Regarding the product】
●All hitch members are order-based. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on car model and material.
●Due to the material and type, some products are made-to-order, so please note that cancellations and changes after ordering are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples, and the installation method and shape may vary depending on the car model. In addition, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not accepted.

※Cannot be shipped to a freight company's service center for pickup.
※Delivery to corporations/companies and some private residences only.
Delivery cannot be made in the following cases:
1. A room in an apartment building.
2. Religious corporations, shrines, temples.
3. When it cannot be determined to be a corporate building.
4. When it is determined that there is a risk involved in the delivery truck's entry.
5. Other special circumstances that may hinder delivery.

【Delivery】
Shipping fees for deliveries to Okinawa Prefecture will be estimated separately.

【Manufacturer】SUZUKI
【Model】Escudo
【Compatible Vehicle Models】CBA-TD54W/94W, CBA-TDA4W
【Model Year】H17.5～H27.9 (May 2005 - Sep 2015)
【Compatible Grades】2.0XE, 2.0XG, 2.4XG (4WD), 2.7XS

【Type】STD
STD:Steel, LTD:Stainless Steel, LTD II:Stainless Steel

【Towing Capacity】C
【Shape】F-1
【Processing】T-2
【Drilling】 -
【Installation Time】 2 hours

【Regarding the Product】
● All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
● Due to the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Please be aware of this.
● For some models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples, and the installation method and shape may vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・Basically, payment on delivery is not possible as it is a direct shipment from the manufacturer.

*Cannot be shipped to a freight company's service center
*Delivery limited to corporations/companies and some private residences
Delivery is not possible in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk of danger for delivery truck access
5. Other special circumstances where delivery is deemed to be impeded

【Regarding Delivery】
Shipping costs for delivery to Okinawa Prefecture will be estimated separately.

【Manufacturer】SUZUKI
【Model】Jimny
【Compatible Vehicle Model】GF/GH/TA/ABA-JB23W
【Model Year】H10.10～
【Compatible Grades】XA, XL, XC, XG, J2, L (up to 6th generation/660cc only), Land Venture (7th generation), XG (8th generation)

【Type】LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】A
【Shape】LTDⅡ
【Processing】-
【Drilling】2
【Installation Time】 3 hours

【Regarding the Product】
●All hitch members are made-to-order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Please note that due to the material and type, some products are made-to-order, so cancellations or changes after ordering are not possible.
●For some models, we may ask for a fax of your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・Photos are examples, and the installation method and shape may vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipping from the manufacturer means payment by cash on delivery is not possible.

※Shipping to a freight company's service center is not possible.
※Delivery to corporations/companies, and some private residences only.
The following cases cannot be accepted:
1. An apartment in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the location cannot be identified as a corporate office building
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed problematic

【About Delivery】
Shipping costs for deliveries to Okinawa Prefecture will be estimated separately.

【Manufacturer】SUZUKI
【Car model】Jimny
【Compatible model year】JA11/12/22
【Year】H2.2～H10.9
【Compatible grade】All grades

【Type】LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】A
【Shape】LTDⅡ
【Processing】License plate relocation
【Drilling】-
【Installation time】3.5 hours

【Regarding the product】
●All hitch members are ordered. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on the car model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the car model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a build-to-order product, returns and exchanges are not possible.

【Regarding shipping】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipment from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's service center
※For corporations/companies, and some limited home deliveries
We cannot accept delivery in the following cases:
1. A room in an apartment building
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate office
4. Cases where it is deemed dangerous for a delivery truck to enter
5. Other special circumstances where delivery is deemed to be hindered

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated each time.

Manufacturer: SUZUKI
Model: Jimny
Compatible Model: GF/GH/TA/ABA-JB23W
Year: H10.10～
Compatible Grades: XA, XL, XC, XG, J2, L (up to 6th generation/660cc only), Land Venture (7th generation), XG (8th generation)

Type: STD
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

Towing Capacity: A
Shape: F-1
Processing: -
Drilling: 2
Installation Time: 3 hours

Regarding the Product:
● All hitch receivers are order-based. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on vehicle model and material.
● Due to the material and type, some products are made-to-order, so please note that cancellations and changes after ordering are not possible.
● For some vehicle models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

Disclaimer:
・ Please confirm compatibility before placing an order. Please refrain from compatibility inquiries after placing an order.
・ The photos are examples, and the installation method and shape may differ depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・ As these are made-to-order products, returns and exchanges are not possible.

Shipping Information:
・ Due to the shape of the product, it cannot be combined with other items.
・ Basically, payment on delivery is not accepted as it is a direct shipment from the manufacturer.

*Shipping to shipping company's business office is not possible.
*Limited delivery to corporations/companies and some private residences.
In the following cases, delivery cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a danger to the entry of the delivery truck
5. Other special circumstances where delivery is deemed to be hindered

Regarding Delivery:
Shipping costs to Okinawa Prefecture will be quoted separately each time.

【Manufacturer】SUZUKI
【Model】Jimny
【Compatible Vehicle Model】3BA-JB64W 3BA-JB74W (Sierra)
【Model Year】H30.7~
【Compatible Grade】3BA-JB64W: XC, XL, XG 3BA-JB74W: JC, JL 【Notes】Includes vehicles equipped with optional Suzuki Safety Support. Compatible with both AT/MT.

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】A
【Shape】F-1
【Processing】D-3
【Drilling】-
【Installation Time】2 hours

【Regarding the product】
● All hitch members are made-to-order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
● Due to the material and type, some products are made-to-order only, so please note that cancellations and changes after ordering are not possible.
● For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. Please refrain from confirming compatibility after ordering.
・The photos are examples, and the installation method and shape vary depending on the car model. In some cases, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup.
※Delivery to corporations/companies, and limited delivery to some private residences.
Delivery is not possible in the following cases:
1. A room in an apartment building
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be identified as a corporate office building
4. Cases where the intrusion of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed problematic.

【About Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】ISUZU
【Car model】Bighorn
【Compatible car models】UBS25GW/25DW/69GW/69DW /26GW/26DW/73GW/73DW
【Model year】H3.12～H14.9
【Compatible grades】All grades compatible

【Type】LTDⅡ
STD:Steel, LTD:Stainless steel, LTD II:Stainless steel

【Towing capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation time】1.5 hours

【Regarding the product】
●All hitch members are ordered. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes to your order cannot be made after it has been placed.
●For some car models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before ordering. Please refrain from compatibility checks after ordering.
・Photos are examples, and installation methods and shapes vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

*Cannot be shipped to a freight company's business office
*Delivery limited to corporate/company addresses and some private residences
In the following cases, delivery cannot be accepted.
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk involved in the entry of delivery trucks
5. Other cases where it is determined that delivery will be hindered due to special circumstances

【About delivery】
Shipping costs for delivery to Okinawa Prefecture will be quoted separately each time.

【Manufacturer】 ISUZU
【Car model】Bighorn
【Compatible model】UBS25GW/25DW/69GW/69DW /26GW/26DW/73GW/73DW
【Model year】H3.12～H14.9
【Compatible grade】All grades compatible

【Type】LTDⅡ
STD:Steel, LTD:Stainless, LTD II:Stainless

【Towing capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation time】2 hours

【Regarding the product】
●All hitch receivers are made-to-order. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on the car model and material.
●Due to the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Thank you for your understanding.
●For some car models, we may ask you to fax your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. Please refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the car model. In addition, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, it is a direct shipment from the manufacturer, so cash on delivery is not possible.

*Cannot be shipped to a shipping company's business office for pick-up
*Delivery limited to corporations/companies and some private residences
In the following cases, we cannot accept delivery:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate office building
4. Cases where the entry of the delivery truck is deemed dangerous
5. Other cases where delivery is deemed difficult due to special circumstances

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Model】Legacy Touring Wagon
【Compatible Models】BH5/9, BHC
【Year】H10.6～H15.5
【Compatible Grades】GT, GT-B, TS Type R, TX-S, TX, 250S, Brighton 【Note】Cannot be installed on: Lancaster, vehicles with rear bumper spoiler

【Type】LTDⅡ
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

【Towing Capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation Time】 2.5 hours

【Regarding the Product】
●All hitch members are ordered. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes after ordering are not possible.
●For some models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before ordering. Please refrain from confirming compatibility after ordering.
・Photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer means payment on delivery is not possible.

※Cannot be shipped to a freight company's sales office.
※Delivery limited to corporations/companies and some private residences.
We cannot accept delivery in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a danger to the entry of delivery trucks
5. Other special circumstances that may hinder delivery

※Cannot be shipped to a freight company's sales office.
※Delivery limited to corporations/companies and some private residences.
We cannot accept delivery in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a danger to the entry of delivery trucks
5. Other special circumstances that may hinder delivery

【About Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately.

【Manufacturer】SUBARU
【Car model】Legacy Touring Wagon
【Compatible car model】BH5/9, BHC
【Model year】H10.6～H15.5
【Compatible grades】GT, GT-B, TS Type R, TX-S, TX, 250S, Brighton 【Note】Cannot be installed on: Lancaster, vehicles with rear bumper spoilers

【Type】LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation time】 3 hours

【Regarding the product】
●All hitch members are made to order. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on the car model and material.
●Please note that due to the material and type, some products are made to order, so cancellations and changes after ordering are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before ordering. Please refrain from confirming compatibility after ordering.
・Photos are examples, and the installation method and shape differ depending on the car model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a build-to-order product, returns and exchanges are not possible.

【Information regarding delivery】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup.
※Delivery limited to corporations/companies and some private residences.
The following cases cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a danger associated with the entry of a delivery truck
5. Other cases where delivery is determined to be difficult due to special circumstances

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Model】Legacy Touring Wagon
【Compatible Vehicle Models】BF3/5, BFA, BG3/5/7, BGA～C
【Model Year】H1.2～H10.5
【Compatible Grades】BG9 not applicable

【Type】LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation Time】2.5 hours

【Regarding the Product】
●All hitch receivers are ordered upon request. (Estimated delivery time: approx. 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Thank you for your understanding.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing your order. Please refrain from compatibility checks after ordering.
・Photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be shipped with other products.
・Basically, direct shipment from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's service center
※Delivery limited to corporations/companies and some private residences
Delivery is not possible in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate office
4. Cases where it is determined that there is a risk involved with the entry of a delivery truck
5. Other special circumstances where delivery is deemed to be obstructed

【About Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Model】Legacy Touring Wagon
【Compatible Vehicle Models】BF3/5, BFA, BG3/5/7, BGA～C
【Model Year】H1.2～H10.5
【Compatible Grades】BG9 not mountable

【Type】LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation Time】 3 hours

【Regarding the Product】
●All hitch members are order-based. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes to orders are not possible.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate for fitment confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. Compatibility confirmation after an order has been placed is not accepted.
・Photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a transportation company's business office for pickup
※For corporations/companies, and limited to some private residences
In the following cases, delivery cannot be accepted.
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. When it cannot be determined to be a corporate building
4. When it is determined that there is a risk involved in the entry of a delivery truck
5. When it is determined that delivery will be hindered due to other special circumstances

【About Delivery】
Shipping costs for deliveries to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Model】Legacy Touring Wagon
【Compatible Vehicle Model】DBA-BR9/BRM
【Model Year】May 2009 - April 2013
【Compatible Grades】2.5GT, 2.5i EyeSight

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】B
【Shape】F-1
【Processing】D-1
【Drilling】2
【Installation Time】2.5 hours

【Regarding the Product】
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from requesting compatibility checks after placing an order.
・Photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・Due to being made-to-order, returns and exchanges are not possible.

【Regarding Delivery】
・Due to the shape of the product, it cannot be combined with other items.
・Basically, direct shipping from the manufacturer, so cash on delivery is not accepted.

*Shipping to a shipping company's business office is not available.
*Delivery is limited to corporations/companies or some private residences.
In the following cases, delivery cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, shrines, temples
3. Cases where the location cannot be identified as a corporate building
4. Cases where it is deemed dangerous for a delivery truck to enter
5. Other special circumstances where delivery is deemed difficult

【Regarding Delivery to Okinawa Prefecture】
Delivery costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Car model】Legacy Outback
【Compatible vehicle models】UA-BP9/BPE, CBA-BP9 DBA-BP9
【Model year】H15.10～H21.4
【Compatible grades】2.5i (including S-Style), 3.0R

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】A
【Shape】F-1
【Processing】D-1・3/K-1
【Drilling】-
【Installation time】2.5 hours

【Regarding the product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, some products are made to order, so please note that cancellations and changes after ordering are not possible.
●For some car models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing your order. Please refrain from confirming compatibility after placing your order.
・The photos are examples, and the installation method and shape may differ depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a built-to-order product, returns and exchanges are not possible.

【Delivery information】
・Due to the shape of the product, it cannot be shipped with other items.
・Basically, it is a manufacturer-direct product, so cash on delivery is not possible.

*Cannot be shipped to a shipping company's business office.
*Delivery to corporations/companies and some private residences only.
In the following cases, delivery cannot be accepted:
1. A single room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the building cannot be identified as a corporate office
4. Cases where it is determined that there is a risk of a delivery truck entering the premises
5. Other cases where delivery is determined to be difficult due to special circumstances

*Cannot be shipped to a shipping company's business office.
*Delivery to corporations/companies and some private residences only.
In the following cases, delivery cannot be accepted:
1. A single room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the building cannot be identified as a corporate office
4. Cases where it is determined that there is a risk of a delivery truck entering the premises
5. Other cases where delivery is determined to be difficult due to special circumstances

【Regarding delivery】
Shipping costs for delivery to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Model】Forester
【Compatible Vehicle Model】E-SF5 GF-SF5/SF9
【Year】H9.2～H14.2
【Compatible Grade】(C,S)/20, (C,S,T)/tb, S/tb-Sti II, T/25

【Type】LTDII
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】C
【Shape】LTDII
【Processing】T-2
【Drilling】-
【Installation Time】3 hours

【Regarding the Product】
●All hitch members are ordered. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Some materials and types are made-to-order, so please note that cancellations and changes after ordering are not possible.
●For some vehicle models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

【Please Note】
・Please confirm compatibility before placing your order. We kindly ask you to refrain from confirming compatibility after placing your order.
・The photos are examples; the installation method and shape may differ depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not accepted.

※Cannot be shipped to a freight company's business office.
※Delivery limited to corporations/companies and some private residences.
In the following cases, delivery cannot be arranged:
1. An apartment in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk of the delivery truck entering
5. Other special circumstances where delivery is deemed to be impeded

【Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

【Manufacturer】SUBARU
【Model】Forester
【Compatible Vehicle Model】CBA-SH5, DBA-SH5
【Model Year】H19.12～H24.10 (Dec 2007 - Oct 2012)
【Compatible Grade】2.0XT (including Platinum Selection, Platinum Leather Selection), Sports Limited (4WD), 2.0X 【Note】Installation unconfirmed for DBA-SH5 (20XS)

【Type】STD
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

【Towing Capacity】B
【Shape】F-2
【Processing】T-4/D-3
【Drilling】-
【Installation Time】 2 hours

【Regarding the Product】
●All hitch members are made to order. (Estimated delivery is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Due to the material and type, some products are made-to-order, so please note that cancellations and changes after ordering are not possible.
●For some vehicle models, we may request a fax of the vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples; the installation method and shape vary by vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be combined with other items.
・Generally, direct shipment from the manufacturer, so cash on delivery is not accepted.

※Cannot be shipped to a freight company's sales office.
※Delivery to corporations/companies, and some private residences only.
In the following cases, delivery cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the building cannot be identified as a corporate office
4. Cases where the delivery truck's entry is deemed dangerous
5. Other special circumstances where delivery is deemed problematic.

【About Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately for each instance.

【Manufacturer】SUBARU
【Car model】Forester
【Compatible car model】CBA-SH5, DBA-SH5
【Model year】Dec. 2007 - Oct. 2012
【Compatible grade】2.0XT (including Platinum Selection and Platinum Leather Selection), Sports Limited (4WD), 2.0X 【Note】Installation on DBA-SH5 (20XS) unconfirmed

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】B
【Shape】F-2
【Processing】T-4/D-3
【Drilling】-
【Installation time】2 hours

【Regarding the product】
● All hitch members are ordered. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
● Depending on the material and type, some products are made-to-order, so please understand that cancellations and changes after ordering are not possible.
● For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. Please refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape vary depending on the car model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a build-to-order product, returns and exchanges are not possible.

【Delivery information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

*Cannot be shipped to a transportation company's sales office.
*Limited to corporations/companies and some private residences.
In the following cases, delivery cannot be accepted.
1. A single room in a multi-unit housing complex
2. Religious corporations, Shinto shrines, Buddhist temples
3. When it cannot be determined to be a corporate office building.
4. When it is determined that there is a danger of a delivery truck entering the premises.
5. Other special circumstances where delivery is deemed to be impeded.

*Cannot be shipped to a transportation company's sales office.
*Limited to corporations/companies and some private residences.
In the following cases, delivery cannot be accepted.
1. A single room in a multi-unit housing complex
2. Religious corporations, Shinto shrines, Buddhist temples
3. When it cannot be determined to be a corporate office building.
4. When it is determined that there is a danger of a delivery truck entering the premises.
5. Other special circumstances where delivery is deemed to be impeded.

【About delivery】
Delivery fees to Okinawa Prefecture will be quoted separately.

【Manufacturer】SUBARU
【Car model】Forester
【Compatible model】5BA-SK9, 5AA-SKE 4BA-SK5
【Year】H30.7～R3.7
【Compatible grades】5BA-SK9: Touring, Premium, X-BREAK 5AA-SKE: Advance 4BA-SK5: SPORT 【Notes】Detachment of tow hook, heat shield (requires modification)

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】C
【Shape】F-1
【Processing】D-3
【Drilling】-
【Installation time】 2.5 hours

【Regarding the product】
●All hitch members are made-to-order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Please be aware of this.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Regarding shipping】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipping from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup
※Delivery to corporations/companies, and some private residences only
The following cases cannot be accepted:
1. A room in an apartment building
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk of a delivery truck intruding
5. Other special circumstances where delivery is deemed to be hindered

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】SUBARU
【Model】Forester
【Compatible Vehicle Model】TA-SG5/9 CBA-SG5
【Model Year】H14.2～H19.11
【Compatible Grade】Cross Sports I/T/2.0i, XT, 20X, Sti, 【Note】Only applicable to 4WD vehicles

【Type】STD
STD:Steel, LTD:Stainless Steel, LTD II:Stainless Steel

【Towing Capacity】C
【Shape】F-1
【Processing】T-4/D-3
【Drilling】-
【Installation Time】 3 hours

【Regarding the Product】
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Thank you for your understanding.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from compatibility confirmation after placing an order.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup.
※Delivery to corporate/company addresses and some limited residential addresses only.
The following cases cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances that may hinder delivery

【About Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】MAZDA
【Model】CX-8
【Compatible Vehicle Model】6BA-KG5P, 5BA-KG5P, 3DA-KG2P
【Model Year】H29.12~
【Compatible Grades】25S, 25T, XD (including PROACTIVE/L Package for each) 【Note】Cannot be installed simultaneously with genuine optional rear under garnish

【Type】LTDⅡ
STD: Steel, LTD: Stainless Steel, LTD II: Stainless Steel

【Towing Capacity】C
【Shape】LTDⅡ
【Processing】D-1/T-2
【Drilling】-
【Installation Time】 2.5 hours

【Regarding the Product】
●All hitch receivers are ordered upon request. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Some materials/types are made-to-order, so cancellations and changes after placing an order are not possible. Thank you for your understanding.
●For some vehicle models, we may ask you to FAX the vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・Basically, this is a direct shipment from the manufacturer, so cash on delivery is not accepted.

*Cannot be shipped to a freight company's service center.
*Delivery limited to corporations/companies and some private residences.
Delivery cannot be made in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. When it cannot be determined to be a corporate office building
4. When it is determined that there is a risk involved in the delivery truck entering the premises
5. When it is determined that delivery will be difficult due to other special circumstances

【About Delivery】
Delivery to Okinawa Prefecture will require a separate shipping estimate each time.

【Manufacturer】MAZDA
【Car model】CX-3
【Compatible model number】LDA-DK5FW/DK5AW
【Model year】H27.2～H29.6
【Compatible grade】XD

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】C
【Shape】F-1
【Processing】D-3
【Drilling】-
【Installation time】2 hours

【Regarding the product】
●All hitch receivers are made to order. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on the car model and material.
●Some materials and types are completely custom-made, so please note that cancellations and changes cannot be made after ordering.
●For some car models, we may ask you to FAX the vehicle inspection certificate for compatibility confirmation.

【Please note】
・Please confirm compatibility before ordering. Please refrain from confirming compatibility after ordering.
・The photo is an example, and the installation method and shape vary depending on the car model. In addition, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipping from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's service center
※Delivery limited to corporations/companies and some private residences
Delivery is not possible in the following cases:
1. A room in an apartment complex
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate office
4. Cases where it is determined that there is a danger in the entry of delivery trucks
5. Other special circumstances where delivery is deemed difficult

【About delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

【Manufacturer】MAZDA
【Model】Premacy
【Compatible Model Number】DBA-CREW
【Model Year】H17.2～H22.2
【Compatible Grades】20F, 20C (incl. Limited), 20CS 【Note】4WD and other grades unconfirmed

【Type】STD
STD:Steel, LTD:Stainless, LTD II:Stainless

【Towing Capacity】B
【Shape】F-1
【Processing】D-1・3
【Drilling】4
【Installation Time】 2 hours

【Regarding the Product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Due to the material and type, some products are made to order, so please note that cancellations and changes after ordering are not possible.
●For some models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from confirming compatibility after placing an order.
・The photos are examples; the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not accepted.

*Cannot be shipped to a transportation company's business office.
*Delivery is limited to corporate/company addresses and some private residences.
In the following cases, delivery cannot be accepted:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a danger to the entry of the delivery truck
5. Other cases where it is determined that delivery will be difficult due to special circumstances

【About Delivery】
Shipping costs for deliveries to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】MAZDA
【Model】CX-5
【Compatible Vehicle Model】LDA-KE2AW, LDA-KE2FW DBA-KEEAW, DBA-KEEFW
【Year】H24.2～H29.2 (Feb 2012 - Feb 2017)
【Compatible Grade】20S, XD

【Type】LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】C
【Shape】LTDⅡ
【Processing】-
【Drilling】-
【Installation Time】 2.5 hours

【Regarding the Product】
●All hitch members are ordered on request. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes to orders cannot be made after they are placed.
●For some vehicle models, we may request a FAX of your vehicle inspection certificate for compatibility confirmation.

【Please Note】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples; the installation method and shape may vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not accepted.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・Basically, direct shipping from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's service center for pickup.
※Delivery only to corporations/companies or, in some cases, to private residences.
Delivery cannot be made in the following cases:
1. A room in an apartment complex
2. Religious corporations, shrines, temples
3. Cases where the location cannot be identified as a corporate office
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed difficult

【Regarding Delivery】
Shipping costs for delivery to Okinawa Prefecture will be quoted separately on a case-by-case basis.

Dedicated Harness
Compatible Vehicle Models: LDA-KE2AW, DBA-KEEAW/DBA-KEEFW Compatible Grades: 20S, XD
First Registration: Feb. 2012 - Dec. 2014
Towing Capacity: C (750kg or less)
Estimated Installation Time: 2.5 hours

【Regarding the Product】
●All hitch members are ordered upon request. (Estimated delivery time is approx. 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible.
●For some vehicle models, we may ask for a fax of your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing your order. We kindly ask you to refrain from compatibility checks after ordering.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, it will be shipped directly from the manufacturer, so cash on delivery is not possible.
・Delivery to Okinawa Prefecture will take 7-10 days after shipment by sea.

【About Delivery】
Shipping costs for deliveries to Okinawa Prefecture will be quoted separately each time.

Compatible model numbers: LDA-KE2AW, DBA-KEEAW/DBA-KEEFW Compatible grades: 20S, XD
First registration: Feb 2012 - Dec 2014
Towing capacity: C (750kg or less)
Estimated installation time: 2.5 hours

【Regarding the Product】
● All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
● Due to certain materials and types being made-to-order, cancellations and changes after an order has been placed are not possible. Please be aware of this.
● For some vehicle models, we may request a fax of the vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples; installation methods and shapes vary by vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・Generally, this is a direct shipment from the manufacturer, so cash on delivery is not available.
・For deliveries to Okinawa Prefecture, delivery will be 7-10 days after shipment due to sea transport.

【About Delivery】
Shipping costs for deliveries to Okinawa Prefecture will be estimated each time.

【Manufacturer】MAZDA
【Model】CX-5
【Compatible Model Types】LDA-KE2AW, LDA-KE2FW DBA-KEEAW, DBA-KEEFW
【Model Year】H24.2 - H29.2
【Compatible Grades】20S, XD

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】C
【Shape】F-1
【Processing】-
【Drilling】-
【Installation Time】2.5 hours

【Regarding the Product】
●All hitch members are ordered on demand. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
●Depending on the material and type, some products are made-to-order, so please note that cancellations and changes after ordering are not possible.
●For some models, we may ask you to FAX your vehicle inspection certificate for fitment confirmation.

【Disclaimer】
・Please confirm fitment before ordering. We cannot confirm fitment after an order has been placed.
・Photos are examples; installation methods and shapes vary by model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's service center.
※Delivery to corporations/companies, and some limited delivery to private residences.
Delivery cannot be made in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the location cannot be identified as a corporate building
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed difficult

【About Delivery】
Shipping costs for deliveries to Okinawa Prefecture will be estimated separately each time.