Collection: New product

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

BR9HS-10
●Sold in cases of 10.
●Solid type terminal: The terminal at the top cannot be removed.
Terminal Type:Solid(non separated)

【Information】
※Single plugs are also available.
※The image is for illustrative purposes only.

BR9HS 1 piece

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●Sold in units of one. Please purchase as many as you need.
*We also sell cases (10 pieces). Purchasing a case is a good value.
*The image is an image photograph.

BR9ES-10

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●A set of 10 pieces is sold in a case.
*Single bottle is also available.
*The image is an image photograph.

1 BR9ES

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●Sold in units of one. Please purchase as many as you need.
*We also sell cases (10 pieces). Purchasing a case is a good value.
*The image is an image photograph.

BR8HS-10
●Sold in boxes of 10.
●Terminal Type: Solid (non-separated)
Terminal Type:Solid(non separated)

【Information】
※Also available for individual sale.
※Image is for illustration purposes only.

BR8HS

●With the integrated terminal type, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●Sold in units of 1 piece *Image is for illustrative purposes only.

BR8ES-10
●Sold in cases of 10 plugs.
●Solid Type Terminal: The terminal nut is not removable.
Terminal Type:Solid(non separated)

【Guidance】
※Also available individually.
※The image is for illustrative purposes only.

1 BR8ES

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●Sold in units of one. Please purchase as many as you need.
*We also sell cases (10 pieces). Purchasing a case is a good value.
*The image is an image photograph.

BR7HS

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

BR7ES

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●Sold in units of one. Please purchase as many as you need.
*We also sell cases (10 pieces). Purchasing a case is a good value.
*The image is an image photograph.

BR10ES-NS
●Sold individually
●This product is a separate terminal type (non-solid type)
Terminal Type:Non Solid

※If you want a solid-type terminal, please purchase "BR10ES".

【Please note】
【1】The outer box may have dents or marks from management stickers.
【2】Products with different box designs may be mixed in.
This product is a new, unused outlet item, so please understand this before purchasing. *Please also refer to the photos.

BR10ES
●Sold individually. Please purchase the quantity you need.
●This product has an integrated terminal (solid type).
Terminal Type:Solid(non separated)
※If you require a separated terminal (non-solid type), please purchase "BR10ES-NS".

【Disclaimer】
Although this product is new and unused, please note the following points.
We kindly request that only customers who understand and agree to these points make a purchase.
※Please also refer to the photos provided.
【1】The outer box may have sun fading or dirt, management/price stickers attached, or writing.
【2】Products with different print information or designs on the box may be delivered together.

NGK spark plug for outboard motors

[BPR6ES]
SUZUKI Suzuki outboard motor compatible models: DF5 (~'10 MODEL)/DF60/DF70

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug BPR5ES for HONDA BF5A outboard motor

[BPR5ES compatible model]
BF5A

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK Spark Plugs for Outboard Motors

[BKR6E Compatible Models]
DF90, 115, 140, 175, 200, 225, 250
DF9.9/15 ('04-'10 models)
DF25 (V2)
DF90/100/115/140/100A/115A/140A
DF150 /175/150TG/175TG
DF200/225/250

●Sold individually. Please purchase the required quantity.

*The image is for illustration purposes only.

●A rod holder that attaches to the base of the BORIKA exclusive clamp mount (BK-FMCG).

●If you attach it to the base of the BORIKA exclusive clamp mount (BK-FMCG), you will be able to use 3 mounts.

BORIKA Clamp & Mount
It can be used interchangeably with rod holders, camera mounts, anchor locks, etc., sold separately.

●As a holder when traveling to a fishing spot, or as a rod holder at a fishing spot.

●Installation is completed by simply inserting the knob nut onto the grab handle. No tools required.

●The direction and angle of the rod holder can be changed.

●In addition to the rod holder, the clamp mount can be replaced with camera mounts, anchor locks, etc.

*Some models such as STX and Spark may interfere with the seat slightly.

[Contents] 454g

●Belray Water Resistant Grease is completely water resistant even to salt water, and can be applied to wheel bearings, bushings, and chassis lubrication points to provide the best lubrication and corrosion resistance.

●It can be used for many purposes, and has water resistance, heat resistance, excellent rust and corrosion resistance, load capacity, impact resistance, and abrasion resistance.

●This product is a high-performance general-purpose grease manufactured with an aluminum composite and barium composite structure.

●Meets all bearing lubricant needs for jet, trailer, marine, automobile, motorcycle, snowmobile/ATV applications.

●Can also be used for trailer wheel bearings on boat trailers and caster wheels on snow blowers where salt resistance and water resistance are essential.

●Provides maximum long-term protection from wear, rust, water washout, etc.

●NGL viscosity grade #2

The wiring socket can be installed at any position on the towed vehicle.

Made by SOREX

●Size: Height 60 x Width 230 x Thickness 30mm
●Sales unit: 1 piece/left and right common shape
●24V compatible

*Water resistant specifications: Built to withstand water from above, such as rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

The more you sweat with the evaporative cooling effect, the cooler you feel!
This amphibious arm cover has a curved design that keeps your upper arms neat and the elbows in place even if bent.

It stretches both vertically and horizontally, so it can be used in pools, at the beach, and outdoors, and provides excellent UV protection.

●It is amphibious, so you can use it in the pool or at the sea.

●The finger-opening design allows you to use your fingertips freely, allowing you to do detailed work while wearing it.

-Cool -5℃ due to evaporative cooling effect

*According to our measurement standards, this is the measured value of the temperature on the back side of the product (skin contact surface).
The experience is not guaranteed.

●Inside stretch mesh with good breathability

●UV cut rate 99%

Size: Total length (standing size) 54cm/approx. 46g (twin)

Material: Rayon, nylon, polyurethane

made in china

The more you sweat with the evaporative cooling effect, the cooler you feel!
We provide thorough care at the pool, at the beach, outdoors, and around town.
Provides solid UV protection from your upper arms to your fingertips.

●Amphibious, can be used in the pool or the sea

-Cool -5℃ due to evaporative cooling effect

*This is the measured value of the temperature on the back side of the product (skin contact surface) according to our measurement standards.
The experience is not guaranteed.

●Smartphone compatible thread
You can operate your smartphone while wearing it.
Conductive thread is used for the thumb, index finger, and middle finger, so it works smoothly.

●Inside stretch mesh with good breathability

●UV cut rate 99%

Suitable size: Hand circumference approx. 18-22cm
Product size: Total length (standing size) 31.5cm
Weight: approx. 32g/pair
Material: Rayon, nylon, polyurethane

made in china

[Product specifications]
◆Material: SUS304

◆Length: 30m

◆Size: 6 d=6 L=43 B=21 Weight 20.1kg Reference working load=270Kg

◆It is a stainless steel anchor chain that is resistant to rust.

[Product specifications]
◆Material: SUS304

◆Weight=88g

*The price is for one piece.

[Product specifications]
◆Material: SCS13 (equivalent to SUS304)

◆Size: d=11.5 d1=5.8 L=120 L1=50 B=13.5 S=47.5 D=72 Weight=142g

*The price is for one piece.

Material: SCS14 (equivalent to SUS316)

Size: L=100 B=16 P=30 H=24 Hole diameter 5mm

Weight: 120g

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=12 L=84 L1=60 B=48 B1=24 B2=42 T=12 D=24

Thread diameter: W1/2

Weight: 250g

Working load: 400kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=8 L=56 L1=40 B=32 B1=16 B2=28 T=8 D=16

Thread diameter: W5/16

Weight: 80g

Working load: 220kg

Material: Main body = SUS304

Size: d=10 L=80 L1=60 B=44 B1=24 S=18

Weight: 100g

Working load: 70Kg

Material: Main body = SUS304

Size: L=72 L1=55 B=39 B1=22 S=18 T=7

Weight: 60g

Working load: 50Kg

Material: SCS13 (equivalent to SUS304) Spring, pin, latch = SUS304

Size: d=8 L=120 B=62 S=18 D=29

Weight = 180g

Working load = 100Kg

This 46-liter soft cooler bag is perfect for camping and other outdoor activities, and can even be secured to jet skis and SUPs. It also features rod holders for a fun fishing experience.

Inner size: 50 x 27 x 34cm - 46 liters
Inner material: 600D polyester laminate with PVC on the bottom for enhanced grip
20mm thick sponge foam insulation
Heat-sealed PVC film interior
Multi-connection system
Two rod holders with bungee locks
Durable inner shell


Jet ski, marine jet, personal watercraft, surfing, board, wakeboard, wakesurfing, kiteboard, flyboard, diving, SUP, windsurfing, kayak, canoe, snorkeling, fishing, marine sports

A large size bag that can store a complete set of clothing.

Top zipper length: 78cm
Height: 45cm
Gusset: 25cm