Collection: Boating Supplies

[Product specifications]
■Material
Body: Aluminum
Roller: vinyl chloride
■Size: Width 210x Depth 114x Height 99mm

A roller that smoothes the movement of ropes and chains when raising and lowering the anchor, and also prevents damage to the hull.
It has rollers in the horizontal and vertical directions, so it can be raised and lowered stably and smoothly even if the rope swings from side to side.
Weather resistance has been strengthened by adding titanium to AC7A aluminum, which is resistant to corrosion and rust.

[Product specifications]
■Material
Body: Aluminum
Roller: vinyl chloride
■Size: Width 158x Depth 87x Height 98mm

A roller that smoothes the movement of ropes and chains when raising and lowering the anchor, and also prevents damage to the hull.
It has rollers in the horizontal and vertical directions, so it can be raised and lowered stably and smoothly even if the rope swings from side to side.
Weather resistance has been strengthened by adding titanium to AC7A aluminum, which is resistant to corrosion and rust.

A life-saving buoy for small vessels.

[Product specifications]
■Type approval number No. 4564
■Size: Outer diameter 390 x inner diameter 145 x thickness 80mm
●Lifeline: 15m
●Buoyancy: 9.3kg

●Type approved product
-Size: 50 x 400mm, set of 2

●Ministry of Land, Infrastructure, Transport and Tourism type approved product
-Size: 50 x 100mm, set of 2

●Stickers to clearly identify where life jackets are stored.
*It is required to be affixed to ships according to Article 61, Paragraph 2 of the Small Boat Safety Regulations.

●The surface has been treated with a waterproof coating.

●Contents: 1 piece

●Size: Width 18 x Height 13cm

●It is a balloon type black ball that can be folded into a small size.
●It must be displayed when the anchor is lowered and moored.
●Small Ship Organization certified product (JCI certified product)

【size】
■Quantity: 2 pieces 1 set
■Diameter: Ф310mm

●It must be displayed when the anchor is lowered and moored.

●Small Ship Organization certified product (JCI certified product)
●Made of plastic plate
●Contents: 1 piece

【size】
Diameter: Ф310mm

● Anchor rope made of spun polyester with excellent weather resistance and strength.
● One end is thimble-spliced, and one steel shackle is included.
● Three-strand rope.
● 12mm (diameter) x 50m (length)

This is an anchor rope made of spun polyester, which offers excellent weather resistance and strength.
One end is thimbled and comes with one steel shackle.

●3-strand rope
●12mm x 40m

This is an anchor rope made from span polyester, which offers excellent weather resistance and strength.
One end is thimbled and comes with one steel shackle.

●3-strand rope.
●12mm x 30m

This is an anchor rope made of Spun Polyester, which offers excellent weather resistance and strength.
One end is thimble-spliced and comes with one steel shackle.

●Three-strand twisted rope
●10mm diameter x 50m length

This is an anchor rope made of spun polyester, which offers excellent weather resistance and strength.
One end is thimble-spliced and comes with one steel shackle.

●Three-strand rope
●10mm x 40m

●This anchor rope is made of spun ester, which has excellent weather resistance and strength.

●One end is thimble-finished and has one steel shackle.

●It is a triple-stranded rope.

●10φ×30m

This is an anchor rope made of Spun-polyester, which is excellent in weather resistance and strength.
One end is thimbled, and it comes with one steel shackle.

●3-strand rope
●8φ×40m

● Anchor rope made of spun ester with excellent weather resistance and strength.
● One end is thimble-processed and comes with one steel shackle.
● Three-strand rope.
● 8φ×30m

00370→46502

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-way rope.

●20φ×20m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●12φ×27m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●12φ×10m

[Applicable models] KAWASAKI Kawasaki 900/1100
[Application] Flywheel removal tool

STS 900(2001-2002)
STX 900(1997-2006)
ZXi 900(1995-1997)
STX 1100(1997-1999)
STX-DI 1100(2000-2003)
Ultra130-DI 1100(2001-2004)
ZXi 1100(1996-2003)

●This boat dolly is essential for transporting boats.

●The tires are 6 inches in size and are puncture-free tires that do not have to worry about air leaks.

●The angle adjustment pin can be operated with a lever, making it easy to flip up and down with one hand.

●The shaft is made of lightweight aluminum and has been anodized to increase durability.

●The bearing in the rotating part of the tire allows the tire to rotate smoothly.

●With knob screws and special metal fittings, the mounting hardware can be easily removed from the boat. Therefore, the mounting brackets do not get in the way when storing the boat.

●Since the metal fittings are removable, the transom is neat and does not get in the way when stored.

■Tire type: 6 inches ■Total length: 775mm
■Weight (one side): 3.2kg
■Tire load capacity (one side) (kg): 120
■Shaft material: Aluminum (anodized)

【Compatibility】SEADOO 800/951 engine
●Support tool used to remove flywheel bolts.

【Information regarding genuine parts】
---------------------------------------------------------------------
*As this product is a genuine part, cancellations and returns after ordering are not accepted.*
Please confirm the following before ordering.
1. Manufacturer
2. Model name (common name): Please check from the vessel inspection certificate (under "Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is listed on a plate affixed to the side or rear of the hull or in the vessel inspection certificate (under "Subject" inside the back cover).
---------------------------------------------------------------------
●About displayed prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please be aware of the above in advance.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Because orders are placed with the manufacturer immediately after your order is confirmed, cancellations or changes to order content due to customer reasons are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will notify you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

●This tool is used to crimp bands on fuel hoses and engine boots.

[Guidance Regarding Genuine Parts]
---------------------------------------------------------------------
※As this product is a genuine part, cancellations and returns after ordering are not accepted.※
Please be sure to confirm the following items before ordering.
1. Manufacturer
2. Model name (common name): Please confirm from the marine inspection handbook (under "Subject" on the inside of the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate affixed to the side or rear of the hull or in the marine inspection handbook ("Subject" on the inside of the back cover).
---------------------------------------------------------------------
●About Displayed Prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. We will contact you in such cases.
Please be aware of the above in advance.

[Please Read Before Ordering]
This product is a **manufacturer-ordered item (genuine part)**.
As we promptly place orders with the manufacturer after your order is confirmed, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 52 x depth 38mm
Cleat width: 145mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm

*When installing, a space of 80mm or more is required under the cleat base.
...
■With water drain hole

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 114x depth 33mm
Cleat width: 110mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm
*When installing, a space of 80mm or more is required below the cleat base.
...
■With water drain hole

■Compatibility: 3/8” hose 8902-7 (17660-ZV5A00) for Honda outboard motors
■Compatible with 9.5mm inner diameter hose

Fitting for outboard motor fuel tank hose
Secures to a 9.5mm inner diameter hose with an optional clamp.
It can be attached and removed with one touch to the tank side fitting.

*The fitting for the outboard motor side is part number: 99522.

■Compatibility: 1/4” NPT 8901-7 (16977-ZV5A00) for Honda outboard motors
■Tank part screw size: 1/4 inch outer diameter 13mm

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Compatibility: For Honda outboard motors (from 2001) 3/8” hose 8900-7 (17650-ZW9-003)
■Compatible with 9.5mm inner diameter hose

By installing this fitting, the connection to the fuel tank can be installed and removed with one touch.
It is used by securing it to a hose with an inner diameter of 9.5 mm using a clamp.

*The fitting for the tank side hose is part number: 99524.

【please note】
Can only be used with square hole type outboard motors.
Please note that some Honda outboard motors manufactured before or around 2001 have round holes instead of the square holes shown.

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Suzuki outboard motors (75hp or more) 1/4” NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Type: Hose side fitting (for diameter: Φ13mm)

■Compatibility: For Suzuki outboard motors (75 HP or more) 3/8” hose

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

●Anchor for trolling from rubber boats to small boats.
●You can adjust the size of the outlet and the binding part of the opening, so you can easily adjust the effectiveness. A stainless steel thimble is used to remove the twist.

■If it is too effective: Tie the eyelet between the hanging ropes at the opening. Narrowing the opening reduces effectiveness.
■When the effect is weak: Please tie the drain eyelet. Closing the drain will make it more effective.

【Product Specifications】
●Support: 16-20 Fort Boat
●Size: Maximum opening diameter 75φ x total length 150cm

【please note】
*The rope that connects the sea anchor and the boat (towing rope) is not included.
*Please prepare in advance before use.

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats of 15 to 19 feet.

●Opening diameter: 1.5m

●Tow rope length: 9m

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats up to 15 feet.

●Opening diameter: 1m

●Tow rope length: 8m

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 33mm
■Total length: 76mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 32mm
■Total length: 84mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Material: Plastic resin
■Size: Width 162x Height 42x Depth 65mm

●Resin handle that can also be used as a step.
●Fix to the transom etc. with screws, etc.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 61mm
■Maximum thickness when inserting flange: 43mm
■Effective length of hose insertion part: 37mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

- Compatible with A series fender, G series fender, F series fender, HTM series fender
●A hand pump for manually inflating air.
●Since the amount of air injected is small, please use it to replenish air when it leaks.

*Exclusively made by Polyform (for fenders that use 97561 nozzle).
*Please note that it cannot be used with other companies' fenders!
*Nozzle is not required when using this pump.