Collection: All items

Compatible with trailer slope rails, rail width 350 mm (center to center of rail)

By installing trailer slope rails, the JET can be loaded more smoothly, and the taillights, housing, etc. do not get submerged in water, so the trailer can be used for a long time.
It is possible.
Installation is easy, just attach the rail guide (included) to the trailer body.

● By installing a trailer slope rail, you can smoothly record the raising of the boat. Since the taillights, axle parts, etc. do not get submerged in water, the trailer will last longer.
● Since it is a 50x50 square pipe, there is no need to worry about the load when pulling it up with a winch.
(When pulling up, please support with 2-3 people. Forcibly pulling it up with only a winch may damage the winch.)
● When not in use, it can be easily stored inside the trailer and PWC body.
(Please note that it may not be possible to store it depending on the boat or trailer, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle part.
● The trailer side processing is simply attaching the rail guide to the rear frame of the trailer with U-bolts. )
* If the frame on the hub trailer side is low, the rear end of the slope rail will be close to the floor, which is dangerous, so please check.

Q. Can the "rail guide part" fit between the trailer's bunk rails and be attached to the rear frame? The size of the rail guide part is
420 mm wide.
In particular, if the rear end frame has a very deep R shape, the U-bolt may not fit. In such cases, if you prepare a larger U-bolt or similar, it will be possible.
* If it is attached to a frame with an R shape, the bottom of the boat may hit the rail guide part, so
please raise the bunk rail to adjust it. * If there is a license plate etc. at the attachment part, it is necessary to move the plate etc. (outside public roads)
* Depending on the compatibility between the boat and the trailer, the rail may not be able to be stored.
After installation, a space of approximately 85mm (height) x 71mm (width) is required for the rail to pass through.

[About payment and packaging]
For manufacturer-direct products
● Only handling fee (transfer bank). (Cash on delivery not accepted)
● Cannot be bundled

[About delivery]
If the recipient of this product is a private residence, an additional fee may be required for the billing amount.

[Compatible] Kawasaki SX-R (2017-)/SEADOO Spark, etc.
[Model Number] J-150S / Jet Launcher 2-wheel

■Size (total length x total width x rail width): 2050 x 820 x 300 mm
Total weight: 23.5kg
Frame weight: 12.5kg
■Material: Aluminum

[About payment and packaging]
Manufacturer direct delivery products
●Payment only (cash on delivery not available)
●Cannot be bundled

[Product Number] J-1480X / Jet Launcher 2-wheel rail type, 480mm width
[Compatibility] Tandem / Runabout models

[Product Specifications]
■Length x Overall Width x Rail Width: 2,160 x 1,070 x 480mm
■Gross Weight: 22kg
■Frame Weight: 10kg

Made of lightweight aluminum that resists rust, with excellent durability due to bolt and weld joints.
Nylon roller bearing plastic wheels and block pattern tires make it easy and smooth to move!
The width has been increased by 30mm compared to the conventional 450mm width.

[Payment & Packaging]
This is a direct shipment product from the manufacturer, so:
●Payment only. (Cash on delivery not available)
●Cannot be combined with other items.

[Shipping]
If the recipient of this product is a private residence, an additional handling fee may be charged to your bill.

【Volume】1L Steel can x 1 bottle

This base oil boasts excellent lubricity even in high-revolution engines,
and places particular emphasis on thermal stability and oxidation stability.
The blend of high-temperature detergent additives keeps the engine interior clean.

KAWASAKI 4-stroke engine oil
4-stroke

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience will not be accepted in principle.
Additionally, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery time as soon as it is confirmed.
We kindly ask for your understanding and to place your order accordingly.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Compatible models]
KAWASAKI STX DI / ULTRA130 DI

● Compatible with NGK plug PZFR7G-G

[Compatible models] KAWASAKI 1100STX (97) / 900STX (99-'00) / 900STS (01-02)

[Color] BLACK×WHITE

[Compatible models] SEA-DOO GTX-L300('18)/GTX155 ('18)/WAKE PRO 230('18)

[Color] Black diamond pattern
[Number of pieces] 10 pieces
[Back side] 3M adhesive tape included

HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

*SEA-DOO GTX-L300('19-'20)/GTX155 ('19-'20)/WAKE PRO 230('19-'20) is HT-8931DBKP.

[Applicable model] SEA-DOO SPARK 2-seater

■Color: Black x Green

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam
[Back side] 3M adhesive tape included

[Applicable model] KAWASAKI SX-R1500 (4 stroke)

[Color] 2-tone diamond pattern black x lime green
[Number of pieces] 4
[Back side] 3M adhesive tape included
HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

[Disclaimer]
Other colors are manufactured to order, so delivery will take approximately 2-3 months from the time of order.
Please note that we cannot accept cancellations of ordered items after the order has been placed.

[Compatible models] KAWASAKI
900STX(01-05)/
1100STX(00-)/
STX-Di/
STX-R/12F/15F(-19)/15S

[Color] Two-tone diamond pattern black x orange
[Number of pieces] 7 pieces
[Back side] 3M adhesive tape included

Due to the grooves uniquely carved in HydroTurf,
Riders can get excellent grip and control.
Thick, high-density foam

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

This is a stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

acti

[Compatible model] GD-HA7

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-2
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Odyssey

[Compatible model] RC1

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Odyssey

[Compatible model] RC1

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Odyssey

[Compatible model] RC1

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

stream

[Compatible models] RN6/7/8/9

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

stream

[Compatible models] RN6/7/8/9

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

stream

[Compatible models] RN6/7/8/9

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

crossroad

[Compatible models] RT1, 2, 3, 4

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-4
[Installation difficulty] ☆☆
Drilling required (floor)
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V

[Compatible models] RE3/4

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V

[Compatible models] RE3/4

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V

[Compatible models] RE3/4

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

air wave

[Compatible model] GJ1

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty] ☆☆
Hole required
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package other than 24Z

[Compatible models] RG1/3

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package other than 24Z
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package other than 24Z

[Compatible models] RG1/3

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package other than 24Z
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package other than 24Z

[Compatible models] RG1/3

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package other than 24Z
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package G/S package G/LS package 24Z

[Compatible models] RG1/3

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package G/S package G/LS package 24Z
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package G/S package G/LS package 24Z

[Compatible models] RG1/3

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package G/S package G/LS package 24Z
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package G/S package G/LS package 24Z

[Compatible models] RG1/3

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package G/S package G/LS package 24Z
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Mobilio *Aero not available

[Compatible model] GK2

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty] ☆☆☆
Hole drilling required Aero not possible
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V *With spare tire lining cut inside the floor

[Compatible models] RD6/7

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-1
[Installation difficulty] ☆☆
Holes required, spare tire lining cut inside the floor
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Elysium

[Compatible model] RR1

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-8
[Installation difficulty] ☆☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Elysium

[Compatible model] RR1

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-8
[Installation difficulty] ☆☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Elysium

[Compatible model] RR1

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-8
[Installation difficulty] ☆☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Mobilio

[Compatible model] GB2

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Hole drilling required/heat shield plate cut depending on individual differences
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Edix

[Compatible models] BE1, 2, 3, 4

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield plate bending required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Edix

[Compatible models] BE1, 2, 3, 4

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield plate bending required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Edix

[Compatible models] BE1, 2, 3, 4

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield plate bending required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Mobilio

[Compatible model] GB1

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty] ☆☆
Drilling required/processing based on existing vehicle
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with models after minor changes RF7 and 8 are also compatible with Spada

[Compatible models] UA/CBA-RF3-8

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
3 holes required. Compatible with models after minor changes. RF7 and 8 are also compatible with Spada.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with models after minor changes RF7 and 8 are also compatible with Spada

[Compatible models] UA/CBA-RF3-8

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
3 holes required. Compatible with models after minor changes. RF7 and 8 are also compatible with Spada.
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with models after minor changes RF7 and 8 are also compatible with Spada

[Compatible models] UA/CBA-RF3-8

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
3 holes required. Compatible with models after minor changes. RF7 and 8 are also compatible with Spada.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

fit

[Compatible model] GD1

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
2 holes required
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.