Collection: All items

●Series: CONCORD
●Pitch size: 18/22
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (SLA009)

[Compatible models]
VX / VXsport / Vx deluxe / VX crusier stock engine (normal boat)
V1 / V1sport stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

【Compatible Models】YAMAHA FZR

【Material】Polyester fabric
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Backing Pad】Non-woven fabric is used as a backing pad on the mirror area to prevent chafing.
3.【Handle】The handle area is reinforced with double-layered fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Applicable Models: YAMAHA
XL700 / XL800 / XL1200 / XLT800 / 1200 / VN

Material: Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiberglass parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. [Tape] Colored tape is used to make it easy to identify the front when putting on the cover.
2. [Lining] Non-woven fabric is used as a lining for the mirror sections to prevent chafing.
3. [Handle] The handle area is reinforced with double-layered fabric.
4. [Buckle] Securely fastens the hull with a single touch.

Please Note:
* The color of the stitching, tape, and bands may vary depending on the production lot.
* As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】YAMAHA
GPR800 / 1200 / 1300 / ALL-GP (excluding FZS)
【!】If you are looking for GP800/1200, please choose "Y-13B"

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiberglass parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Backing】Non-woven fabric is used as backing in the mirror area to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Disclaimer】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Applicable models】YAMAHA GP800/1200
*For "GPR", item number: Y-2B is suitable.

【Material】Polyester material
The inside is made of long-fiber non-woven fabric to protect the body, and it protects the fiber parts of the hull.
This is a high-quality cover made in Japan from fabric to sewing.

1. [Tape] The tape is colored to make it easy to identify the front when putting on the cover.
2. [Back padding] Non-woven fabric is used as back padding for the mirror part to prevent chafing.
3. [Handle] The handle part is also reinforced with double fabric.
4. [Buckle] Securely fastens the hull with a single touch

【Disclaimer】
*The color of the stitching, tape, and band may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. Please inquire in advance if you are in a hurry, as it varies depending on the season.

volvo

[Compatible model] SB5244W

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction force] B
[Ball mount] B-4
[Installation difficulty]☆
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be shipped by sea.

cross country

[Compatible model] SB5244AW/AWL

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] B
[Ball mount] B-7
[Installation difficulty]☆
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

cross country

[Compatible model] SB5244AW/AWL

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] B
[Ball mount] B-7
[Installation difficulty]☆
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

cross country

[Compatible model] SB5244AW/AWL

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] B
[Ball mount] B-7
[Installation difficulty]☆
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be shipped by sea.

wrangler

[Compatible model] TJ40S/TJ40H

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] C
[Ball mount] Dedicated ball mount
[Installation difficulty]☆
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

1. Compact, High Strength, and Corrosion Resistant - Made of stainless steel for excellent strength and corrosion resistance.

2. Two-Way Ratchet Lock - Highly secure and can be firmly fixed.

3. Deluxe Grip for Easy Leverage - Designed with a thicker lever for easy operation.

4. Double Gear Mechanism - Prevents gear slippage for stable operation.

5. All Stainless Steel Construction - The body and lever are all made of stainless steel for excellent durability.

Specifications

• Gear Ratio: 4:1

• Material: Stainless Steel

• Maximum Pulling Load: 727kg / 1600LBS

• Handle Length: 170mm

Notes

• This product includes the main unit and handle only.

• Winch strap is not included; please prepare it separately.

■Gear can be changed to 2 speeds

■Can be used in forward rotation lock, reverse rotation lock, and 3 free stages.

■The handle is thicker and easier to grip.

■Gear ratio: 5:1/12:1

■Material: Steel plating

■Maximum towing load: 1100kg / 2500LBS

■Handle length: 250mm

*Body/handle only.

*Winch strap is not included.

[Adaptation]
YAMAHA SVHO/SHO (for YS/YV)

SOLAS impeller drive shaft holder

[Compatibility]
For YAMAHA YS/YV A stamping

Impeller live shaft holder for SOLAS

[Compatible models]
YAMAHA Yamaha FR-FZS/SHO
Drive shaft holder for SOLAS impeller YS

【Compatible models】

■Impeller wrench for SEA-DOO SOLAS SRZ-TP twin impeller

[Application] A special tool required for attaching and detaching SOLAS Twin Impeller SRZ-TP.

【Compatible models】

■SEA-DOO Impeller wrench for SOLAS SRX/SRZ

[Application] A special tool required for installing and removing the impeller.

【Compatible models】
SEA-DOO for Sea-Doo SOLAS SR/SRB

impeller wrench

[Application] A special tool required for installing and removing the impeller.

[Compatible models] YAMAHA
800GPR / 1200GPR / 1300GPR / 800XL / 1200XLT / 1200XL-L

■SOLAS Impeller YF/YG/YQ/YD (Concorde)
■155XL pump, drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 800/1200/1300GPR/1200XLT/1200XL-L/FX140/160

SOLAS impeller YF / YG / YQ YD (Concorde) compatible
Drive shaft 20mm

【Compatible models】
■KAWASAKI KAWASAKI ALL models (excluding 450/550)
■SEA-DOO 2-stroke model

[Application] A special tool required for installing and removing the impeller.

The angled tip reduces resistance at the start, allowing for smooth towing.
The backrest also prevents lateral sliding.

■Size: 190×160×62cm
■Max. capacity: 2 people
■2 towing points
■PVC tube
■Nylon full cover
■Easy-to-connector attached to main unit (non-removable)
*Main unit only; pump and rope are not included.

[Comes with a free JSPTOKAI original bag, convenient for storing gear!]
A 56L large-capacity bag that can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The bottom is made of mesh material for good drainage.
This bag solves all your problems with carrying and storing gear!
Size: 50x45x25cm, Fabric: Clear PVC black mesh

This classic deck tube, with its simple design, offers a top-class thrilling experience as you tow close to the water's surface.

【Front Towing Specifications】
■Size: 187.5×155cm
■Maximum Capacity: 3 people
■Nylon Full Cover
*Tube only; pump and rope are not included.

【Comes with a JSPTOKAI Original Bag, convenient for storing gear!】
This 56L large-capacity bag can store up to four life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The mesh bottom allows for water drainage.
This bag provides an instant solution for carrying and storing all those items you used to struggle with!
(Size: 50x45x25cm / Fabric: Clear PVC with Black Mesh)

●Higher backrest prevents falling into the water.
●Handle position has been changed to be easier to grip.
●New boarding handles allow for a more secure ride.

This is the same shape as AIRHEAD's Marble series,
and can be pulled from either the front or back for double the fun.
The backrest also makes it easy for women and children with less arm strength to maintain their posture.

■Size: 167×152×101cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover
*Main unit only, pump and rope are not included.

[Comes with a JSPTOKAI original bag for convenient storage of gear]

This 56L large-capacity bag can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The bottom is made of mesh material for good drainage. With this bag,
you'll have all the goods you always needed (size
: 50x45x25cm /fabric: clear PVC black mesh)

A new sensation featuring a flexible fabric "Flex Foam Seat" in the seat area. Like a deck tube, you can lie down, kneel, or sit on the seat, allowing both adults and children to enjoy it in their preferred riding style.
[This series is available in 2-person and 3-person models.]

■ Size: 183×152cm
■ Max capacity: 2 people
■ PVC tube
■ Nylon full cover type
*Main unit only; pump and rope are not included.

[Comes with a JSPTOKAI original bag, convenient for storing gear!]
This 56L large-capacity bag can store up to four life jackets. The U-shaped zipper allows the top to open wide for easy storage of marine gear.
The mesh bottom allows water to drain out. This bag is perfect for all the gear you always needed.
(Size: 50x45x25cm / Fabric: Clear PVC with black mesh)

By making the classic donut-shaped tube into an arrow shape, stability and controllability are improved, making it a standard model that can be enjoyed by both adults and children!

■Size: 127×122cm
■Maximum capacity: 1 person ■PVC tube ■Nylon half cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

The basic shape is similar to the Bubba series,
but the Bingo can reduce the amount of air pumped in and out due to its lower backrest.
With a backrest that fully supports your bottom, it can be considered a series designed for energy conservation.
Towing is possible from two points (front and back).
[This series is available in 2-person, 3-person, and 4-person models.]

■ Size: 175 x 172 cm
■ Max Capacity: 2 people
■ PVC Tube
■ Nylon Full Cover
■ Easy-to-Connect included

※ Main unit only; pump and rope are not included.
[140] (Yu-Pack)

The flex wing gives you complete control over the tube.
For those who are tired of just being pulled along!
Experiment with various maneuvers such as jumps, slaloms, and barrel rolls by shifting your center of gravity through weight transfer and changing your sitting position.
Find the playstyle that suits you best.
It also requires less air, making inflation a little easier.

■ Size: 188 x 178 cm
■ Max Capacity: 4 people
■ PVC Tube
■ Nylon Full Cover
■ Easy-to-Connect main unit included (non-removable)

[Comes with a FREE JSPTOKAI Original Bag, convenient for storing gear]

A 56L large-capacity bag that can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The mesh bottom allows water to drain.
This bag will solve all your problems with carrying and storing your gear!
(Size: 50x45x25cm / Fabric: Clear PVC Black Mesh)

Inflatable design

●Stable buoyancy allows up to 6 people to ride.
●Zippers on the sides allow connecting water walkways.
●Can also be connected to the separately sold slider [Part No. W19-2210].
●Recommended for use as a connecting passage between moored boats or as a pontoon.

■Product size: 183×305cm
■Maximum capacity: 6 people
■PVC specification
*This product cannot be towed.

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your precious boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates even large, reinforced ratchets.
Made from the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt has been set to the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1 piece
■Material (main body): Chloroprene
■Attachment method: Velcro

【Please note】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
We cannot accept exchanges or returns other than for product defects.

Trailer parts Boat trailer Lashing belt Wetsuit fabric

【Size】
■When rolled: 90×290mm
■When unrolled: 250ｘ290mm

Protects your boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates large, reinforced ratchets.
Made of the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because you can attach it after setting the belt to the cargo.
Compared to types that need to be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1
■Material (main body): Chloroprene
■Attachment method: Velcro closure

*Standard size 【ULT131-M】 has a white logo
*Large size 【ULT131-L】 has a red logo

Trailer Parts Boat Trailer Lashing Belt

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

【Compatible models】All SEA DOO models
【Material】Polished stainless steel

【Size】
・Mounting hole pitch: Approx. 44mm
・Screw part: M8 x 24mm
・Hook part: 136 x 87 x 40mm (width x height x depth)
・Weight: Approx. 345g

Luxurious mirror-finished stainless steel!
Replacing the cheap genuine hook with this one will definitely enhance the visual appeal!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.