Collection: All items

Ensures stability when parked.

■SRX-117-1 For NF-1/NF-E
■SRX-117-2 For boat trailers

【Requests and Precautions When Ordering】
*When ordering, please provide the "trailer model and installation position at time of order."
*This information will be used to confirm compatibility with the manufacturer when arranging the product.

[Requests and Precautions When Ordering]
*Please provide the following trailer information when ordering: (model, year, VIN)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

[Shipping Information]
●Cannot be combined with other items...To prevent scratches and damage, this item will be shipped individually. Cannot be combined with other items in one package.
●Direct shipment product...This product is shipped directly from the manufacturer, so "cash on delivery" and "combined packaging" are not possible.
●Limited payment methods...Bank transfer or credit card only (cash on delivery not accepted)
●Shipping will be calculated as [shipping cost x quantity] per item.

[Delivery]
Shipping costs to Okinawa Prefecture will be estimated separately each time.

Stainless steel ball mount with O-ring (SRX-071) to reduce rattling noise during towing.
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Processing may be required due to misalignment of hole positions caused by individual differences.

【Precautions when ordering】
*Please provide your "car model" so that we can engrave the class.
*Cancellations, changes, and returns will not be accepted if the model confirmation result is not a mismatch.

【Information】
Solex ball mounts are available in matte (SRX-123), mirror finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

Steel Ball Mount
■Shaft Diameter: φ19mm
■For SOREX Square Type (SX3002) Hitch Members Only

※Hitch ball and quick-release pin are not included.
※Processing may be required due to misalignment of hole positions caused by individual differences.

【Notes on Ordering】
※Please provide your "vehicle model" for grade stamping.
※Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
Sorex ball mounts are available in matte finish (SRX-123), polished finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

■Lineup
SRX-016-B1 45x75 for Side Frame
SRX-016-B2 75x75 for Tongs
SRX-016-B3 for Wide

*10-inch wide tires
are mounted vertically to the side frame using the wide bracket (SRX-016-B3).

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

【Compatible models】KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035W-GR Green
SE-101035W-RD Red

・NEW-WIDE (The base is 8mm wider than conventional models, improving running stability!)
・The angle of the side fins can be adjusted steplessly from 0 to -12 degrees relative to the lower edge of the sponson plate.
・The protrusion amount of the side fins is 25mm from the sponson plate surface.
・The sponson plate with side fins has its rear end cut, reducing the protrusion amount.
・The mounting position of the sponson plate can be selected from 4 positions: up to 24mm in the front-back direction and up to 11mm in the up-down direction, similar to conventional models.
・The flap at the rear end of the base plate can also be adjusted steplessly from 0 to -14 degrees, similar to conventional models.
Guide lines are engraved, making it easy to align the angles on both sides.

【Compatible models】 YAMAHA FZR / FZS

【1】SE-027020 For STD standard handlebars (STD bar Φ22.4)
【2】SE-027020F For FAT fat handlebars (FAT bar Φ28.6)

● Developed in collaboration with Krismackle Gauge!
● The handlebar position is set as low as possible to suit racing conditions.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRT1008: Outer diameter 8 x 10 x 10mm / Inner diameter 5 x 7 x 7mm
NHRT1210: Outer diameter 10 x 12 x 12mm / Inner diameter 7 x 8 x 8mm
NHRT1412: Outer diameter 12 x 14 x 14mm / Inner diameter 8 x 10 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRE0806: Outer diameter 6 x 8mm / Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm / Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm / Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14mm / Inner diameter 8 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Select a size
NHRC0806: Outer diameter 6x8mm / Inner diameter 4x5mm
NHRC1008: Outer diameter 8x10mm / Inner diameter 5x7mm
NHRC1210: Outer diameter 10x12mm / Inner diameter 7x8mm
NHRC1412: Outer diameter 12x14mm / Inner diameter 8x10mm

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

●This kit converts a 2-wheel launcher to a 4-wheel type.

*However, it cannot be attached to the "J-130SX Single Compact".
*Processing work such as cutting to length is required.

*Please note that the type differs depending on the model.
★JL222: J-130/J-1300/J-1300X *Cannot be attached to J-130SX
★JL223: J-1480/J1480X

【Product Information】
●To prevent scratches and damage, this product is shipped individually and cannot be combined with other items.
●Due to direct manufacturer shipping, "cash on delivery" and "combined packaging" are not possible.

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

[1: 97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2: 97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3: 97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4: 97-4339] 3/8×1/2×1/2 Outer diameter 11mm・14mm Inner diameter 6mm・8.5mm.

Shape: T-shape
Used when changing the routing by installing it between cooling hoses, or when establishing a bypass line.

Parts PWC personal watercraft engine parts jetski jet ski

Colored Plug Cap
●Quantity: 1 piece

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

●Teardrop-shaped air fender.
●Thick-walled with reinforced ribbed holes for rope attachment, making it durable and suitable for use as a course buoy when inverted.
●Easily inflatable with an air compressor or air gun.

【Product Specifications】
■Size: Diameter / Overall Length / Eye Diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm / 590mm / 25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【Please Note】
Air inflation nozzle is not included.
※If you require an air inflation nozzle, please purchase the separately sold item [Part No.: 97561].
※Products are delivered deflated.

・Material: Steel
・Plate thickness: 2.0mm
・Product details: Plate only (screws etc. not included)

Size: Please check A/B/C/D along with the image.
●L-shaped / Manufacturer: 0103-01 ■A: 60 /B: 95/C: 50/D: 35mm
●L-shaped long / Manufacturer: 0103-04 ■A: 60 /B: 95/C: 50/D: 90mm
●Straight* / Manufacturer: 0103-03 ■A: 115/B: 95/C: 50/D: 0mm
*Straight is a flat plate without bends

■Please use compatible main jets and slow jets for CV and CDCV carburetors.
■WSM products
*Some products may not have the number stamped on them.
*Due to the material, some discoloration that does not affect use may be observed.

006-7080

006-7110　110
006-7115　115
006-7120　120
006-7125　125
006-7128　128
006-7130　130
006-7132　132
006-7135　135
006-7138　138
006-7140　140
006-7142　142
006-7145　145
006-7148　148
006-7150　150
006-7152　152
006-7155　155
006-7158　158
006-7160　160
006-7162　162
006-7165　165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fittings used when removing the carburetor choke shaft.

[For KEIHIN]
006-538 Primer Inlet
006-539 Blind Cap

This is a cap to be installed when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

【Compatibility】 MIKUNI SBN Carburetor
006-438 for SBN38mm
006-444 for SBN44mm
006-446 for SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetors.
●Kit includes: shaft, butterfly, E-clip, seal, bushing, nylon washer

Better value than genuine parts!!

Sea-Doo Driveshaft Carbon Ring
【003-110-01】For 22mm driveshaft
●Genuine part number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., S.C., Wake

-------------
【003-110-02】For 27mm driveshaft
●Genuine part number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC

■ No preliminary inspection model
■ An inflatable boat that does not require a license or boat inspection if equipped with a 2-horsepower outboard motor.
■ The transom is 50mm higher than usual, allowing for greater speed with the same horsepower.
■ Includes one bench mat that can be used to decorate the aluminum bench.
* The color of the bucket in the product image is for illustrative purposes only and cannot be specified.

【Boat Specifications】
■ Material: PVC
■ Capacity: 4 people
■ Load capacity: 500kg
■ Overall length x Overall width x Tube diameter: 300 x 150 x 42cm
■ Internal length: 215cm
■ Internal width: 73cm
■ Total weight: 34kg
■ Bottom type: High-pressure air floor
■ Maximum horsepower: 10HP
■ Number of air chambers: 3
■ 1-year warranty

【Standard Accessories】7-piece set
Aluminum oars x 2 (one pair),
Carry case,
Foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

■Heat foam plastic frame
■100% UV protection mirror lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With hard case
■Frame size 16.0x5.0cm

【Note】
This design does not float on water.
The design of the back strap may vary depending on when it arrives.

■Lens color: Gray smoke lens

■Heat press foam plastic frame
■100% UV protection polycarbon lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With mesh soft case
■Even if you drop it, it will float on water, so you don't have to worry about it.
■Frame size 16.0x5.0cm

The material used blocks over 99% of harmful UV rays, and the slightly thin fabric is soft, stretchy, and fits snugly to the body, making it extremely comfortable to wear.
Rash guards are an essential item that not only protects children's skin from harmful UV rays, but also protects them from abrasions, jellyfish, etc.
You can also coordinate the entire outfit with the hats, rash guards, and shoes sold in the same series.

■ Rush pants
The stretchy body-fitting material is not stiff and provides excellent athletic performance.
Recommended for water play such as swimming in pools, sea bathing, and baby swimming.
The fabric is a little thicker (80 oz) than regular rash guards, making it more durable. The inside front and crotch area are made of soft, fine inner mesh to prevent chafing. The longer length helps prevent injuries and sunburn on your thighs.

[Material] 88% nylon, 12% polyurethane

[Size] 100cm.120cm.140cm.150cm

*Accessories worn by the child models for image photos are not included.
*As this is a special offer item, returns and exchanges are not accepted.

In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

■ Suitable height size S: 110-130cm
M:120-140cm
L:130-150cm

*Accessories worn by models for image shoots are not included.

[Caution] Not applicable to legal equipment for small boats. This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Girls Elementary School Swimming

Since it's a folding and opening/closing type, you can insert the hanger into the wetsuit through the neck opening while it's folded, then set it.
The thickness of the hanger creates space inside the wetsuit, allowing for better ventilation and faster drying.
It also has a structure that accelerates wetsuit drying without leaving hanger marks.
Smooth attachment and detachment with simple operation, and one-touch maneuverability focused on "ease of use"
allows for smooth attachment and detachment even with neck-entry wetsuits.

■Made in Japan

■Materials: Main body: PP / Hook: Aluminum

The hook, which bears a heavy load, is made of highly durable and corrosion-resistant aluminum.
The extra-thick 6mm aluminum hook firmly holds wetsuits in various environments such as beaches and home balconies, and is highly resistant to corrosion from seawater.
Furthermore, it is a "strong" hanger with a wider base at the arms.
The double effect of concave grooves (to drain water) and air vents (holes) enhances quick-drying!

【Please note】
※When removing, be careful not to pinch your fingers.
※This product is exclusively for wetsuits. Do not use it for other purposes.

【How to store your wetsuit】
To slow down the deterioration of your wetsuit as much as possible, proper storage is important.
"Salt" and "direct sunlight" are the causes of rubber deterioration, so avoid these two when storing.
If you rinse the salt thoroughly and dry it in a cool, shaded place, the deterioration speed should be suppressed.
Also, when storing a wetsuit, if you fold it, the creases will flatten and won't return. Store it by hanging it on a hanger without folding.

Surfing Bodyboarding Wakeboarding Wakesurfing KiteboardingFlyboarding Diving SUP Windsurfing KayakingCanoeing Marine Sports

The main body and waist elastic are integrated, and the smooth texture will make you addicted to wearing it.
There is an outdoor logo on the front part of the waist.
It is highly elastic and fits gently to the contours of your body.
It's easy to cut corners when it comes to underwear, but with a glimpse of logos and printed designs,
Perfectly stylish! This is a recommended item that is perfect as a gift!

It has excellent elasticity and water repellency, so it can also be used as innerwear for wetsuits and board shorts.

■What are seamless boxer shorts?

These boxer shorts have no seams in the fabric, minimizing unevenness and providing an ultimate fit to the body.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
The underwear has been recognized for its diverse and high-quality designs that are on par with daypacks.
It has become a popular item of the brand.
The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*For hygiene reasons, we do not accept returns or exchanges of clothing that is worn directly on the skin.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

【Compatible models】 KAWASAKI

Very convenient, as it floats even if dropped in water.
Please use according to your wrist size.

【Float Color】×【Lanyard Color】
A2126 Black × Silver
A2148 Red × Black
A2151 Blue × Silver
A2149 Green × Black