Collection: All items

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

[Adaptation]
UL15012 KEIHIN Carburetor [Photo: Right]
UL15013 MIKUNI carburetor (*) [Photo: left]
(*) Cannot be used with genuine SBN40.

●The throttle becomes lighter and reduces fatigue.

[Compatible models] KAWASAKI SXT series ULTRA series
ULTRA310X/310LX/310R/310SE
ULTRA300X / 300LX /
ULTRA260X/260LX
ULTRA250X
ULTRA LX
STX12F / STX15F / STX 160X / 160LX

*For the SX-R series and X-2 series, the following products are compatible.
*Product number: UL010 / UL14020

3-piece construction: base plate, spacer, and face disc.
Anodized exhaust cover. Creates a stylish rear view.
Machined aluminum specification with excellent strength and corrosion resistance.
A dress-up item with a wide variety of colors.

[Kit contents]
Base plate x 1,
Spacer x 1,
Face disk x 1,
Mounting bolts: M6-10 (button) x 3,
M6-28 (cap) x 3

●Machined aluminum
●Cord length: 3m

It can be installed anywhere within reach from the handle grip.
When used in conjunction with UNLIMITED light tension lever (product number: UL001, UL039, UL33001), ON/OFF operation can be performed while operating the throttle.

[Disclaimer] Please note that the color of the switch may vary depending on the shipping date.

UL015SL Silver
UL015BK Black
UL015GR Green
UL015BL Blue

[Compatible models] KAWASAKI
New 1500SX-R
800SX-R
800X-2
STX900

*For the ULTRA series and STX series, the following products are compatible.
*Product number: UL14010, UL011, UL14001

Made of aluminum A6061 with excellent strength and corrosion resistance, this cover is chemically polished anodized and has an excellent design.
■JJSF certified parts

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

[Applicable] Hose outer diameter Φ15.8mm

[Application] To prevent the hose from coming off [Material] Clamp: All stainless steel, Body: Aluminum

We will make your hose look stylish.

JL80052BL Blue
JL80052RD Red
JL80052BK Black
JL80052PU Purple
JL80052SL Silver

【Compatible Models】SEA-DOO GTX/RXT Series (2010-2017) *Models without suspension
GTX 155/215／Limited
GTX Limited
RXT 260
RXT-X260 / RXT-X300RS
*For iS-equipped GTX series (2017), GTX-S, please refer to part number: 295100718
*For iS-equipped GTX series (2009-2016), please refer to part number: 280000460
*For RXT-Xas (with suspension), please refer to part number: 280000586

●Genuine SEA-DOO PWC cover.
●Designed for a perfect fit and made with UV-resistant fabric.

【Information Regarding Genuine Products】
*This is an取り寄せ (order-on-demand) product.*
*As this is a genuine product, cancellations and returns are not accepted after your order has been placed.*
--------------------------------------------------------------------------
●Please ensure you check the following points before selecting a product and placing an order.
1. Please confirm the manufacturer, 2. model name (common name), and 3. model year before purchasing.
●About Displayed Prices
Prices and specifications are subject to change without notice. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price.
In such cases, we will contact you before shipping. Thank you for your understanding.

【Please Read Before Ordering】
This product is a **manufacturer order-on-demand item (genuine part)**.
As we promptly place orders with the manufacturer upon confirmation of your order, cancellations or changes to your order content due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these points in advance.

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IW-24 / BR7ES/8ES
[2] Compatible with IW-27 / BR9ES
[3] Compatible with IW-31 / BR9ES~10ES

【Compatible Models】
★YAMAHA SJ(96～) only
★KAWASAKI 550SXi/650SX/750SX/750SXi

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the hull's fiber parts.
This is a high-quality cover, from fabric to stitching, all made in Japan.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Reinforcement】Non-woven fabric is used as reinforcement on the mirror parts to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Please Note】
※The color of the stitching, tape, and bands may vary depending on the time of arrival.
※As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Applicable models】YAMAHA
VX Series (~2014)
VX / 110DX / CRUISER / VXR* / VXS
*For the new VXR, part numbers [Y-5S-1: Silver, Y-5B-1: Black] are compatible.

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to sewing.

1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as backing in the mirror area to prevent chafing.
3. 【Handle】The handle area is double-layered for reinforcement.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*Due to made-to-order production, returns, exchanges, and cancellations are not possible after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Y-5B (Y-1) Black

【Compatible Models】SEA-DOO
GTR230(2017-2020)
GTI 130(2011-17)
GTI SE 130(2020-24)
GTI SE 155(2011-13)
GTI SE 170(2026)
GTR215(2012-16)
GTR-X 230(2017-19)
WAKE 155(2011-16)

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and safeguard the fiber parts.
From fabric to stitching, all made in Japan for high quality.

Features
1. 【Tape】Colored tape is used to make it easier to identify the front when putting on the cover.
2. 【Lining】Non-woven fabric is used as a lining for the mirror part to prevent chafing.
3. 【Handle】The handle part is reinforced with a double layer of fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Disclaimer】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*Since this is a build-to-order product, returns, exchanges, and cancellations are not possible after placing an order.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-17B Black

【Compatible Models】SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-24)

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to stitching.

Special Features
1. 【Tape】 Colored tape is used to easily identify the front when covering.
2. 【Backing】 Non-woven fabric is used as backing for the mirror part to prevent rubbing.
3. 【Handle】 The handle part is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and band may vary depending on the production lot.
* As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

S-13B Black

1. High Strength and Corrosion Resistance
   Made of stainless steel, it offers excellent strength and corrosion resistance.

2. 2-Way Ratchet Lock
   Provides high safety and secure fastening.

3. Deluxe Grip for Easy Leverage
   Designed with a thicker lever for easier operation.

4. Double Gear Mechanism
   Ensures stable operation without gear slippage.

5. All Stainless Steel Construction
   The body and lever are all made of stainless steel for superior durability.

Specifications

• Gear Ratio: 4:1
• Material: Stainless Steel
• Max Pulling Load: 920kg / 2000LBS
• Handle Length: 210mm

Notes

• Only the main unit and handle are for sale.
• Winch straps are not included; please purchase them separately.

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller [for YB/YD-SC]
144 pump diameter drive shaft 18mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

This is a repair kit for PVC fabric tow tubes and banana boats.
■Set includes: PVC (30G) fabric 20x20cm and PVC adhesive

＜Application Instructions＞
1. Clean the area to be repaired.
2. Cut the patch into a round shape, larger than the damaged area.
(*Cutting it into a square may make it peel off easily)
3. Place the patch over the damaged area and mark its size with an oil-based marker.
4. Apply adhesive to the main body.
5. Once the surface is slightly dry, apply the patch.
6. Finally, tap the applied area with your hand to remove air and ensure a firm bond, then you are done.

【Note】Not suitable for repairing fabric seams or pressure-bonded areas.
Also, the package may change depending on the incoming lot.

●The backrest has been raised to prevent falling into the water.
●The handle position has been changed to be easier to grip.
●A new boarding handle has been added, making for a safer ride.

This is the same shape as the AURHEAD Marble series, and can be pulled from either the front or back, doubling the fun!
The backrest also makes it easy for women and children with less arm strength to maintain their posture.
[This series is available in 2-person, 3-person, and 4-person models]

■Size: 220 x 203 x 124 cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover
*Main unit only; pump and rope are not included.

●Higher backrest prevents falling into the water.
●The handle position has been changed to make it easier to grip.
●Additionally, a new boarding handle has been installed to allow for safe riding.

It's the same shape as AIRHEAD's marble series, and can be pulled from either the front or the back, making it twice as fun!
Also, the backrest makes it easy for women and children with limited physical strength to maintain their body shape.

■Size: 190×185×114cm
■Maximum capacity: 3 people
■PVC tube
■Nylon full cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

With safety nut washer

■Size (A×B×C): 90×88×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

■Size: 24cm (10")

This is a standard logo sticker from UNLIMITED that is instantly recognizable.
It's a sticker that we hope you'll not only put on your jet ski, but also on your car and daily goods.

This cap features a large "LOOK FAST and GO FAST" logo.

The front panel of the cap has a custom embroidered logo.
The thick embroidery gives it a luxurious feel. The back features a gold brand embroidery.

The wide, flat brim, popular in street style, offers excellent fashionability.
While a curved brim blocks more sunlight from hitting your face, it also narrows your field of vision.
The UNLIMITED cap has a wide brim that blocks sunlight while maintaining a clear field of vision.

The red color on the inside of the brim emphasizes the design.
Add the cap to your casual everyday wear of sweats, printed T-shirts, and board shorts for a street-style look...it's a popular casual style.

It also looks great worn backward with a collared shirt or polo shirt.
The UNLIMITED cap has a logo on the back, leaving no detail overlooked.

■One size fits all...features a snapback closure (adjuster) at the back.

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

【Compatible Models】SEA-DOO ST3 Hull
※RXT-X 325/300 , GTX-L 325/300 , GTX 230/170 , Wake Pro 170 ’18 and later

【Quantity】1 set of 10 parts
【Material】Stainless steel
【Thickness】1.5mm

Washers used for the seat base engine cover of the SEA-DOO ST3 Hull series.
Perfect for preventing biting when tightening the genuine engine cover and as an accent part!

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

■Compatible models: KAWASAKI 750/800

Digital CDI-R power unit.

Supports a wide range of users, from Sunday riders to race and freestyle users.

Uses a high-performance 8-bit microcomputer to digitally control ignition timing.
Allows switching between MAP 1-4 with different ignition timings via a built-in switch.
Designed for racing, so the rev limiter is cut.
Enhanced input lines to support higher RPMs. Also, torque characteristics are optimized for higher RPMs.
Compact design that fits neatly into the electrical box.
Achieved unprecedented durability.

■CDI: Made in Japan

[Information]
By using the separately sold lightweight duralumin flywheel (Part No.: JL-K8P-F), further improvements in response and high-RPM range can be expected.
(Set Part No.: UL21001-KF Total Loss Digital System Kit)

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

【Manufacturer】SUZUKI
【Model】Jimny
【Compatible Vehicle Model】3BA-JB64W 3BA-JB74W (Sierra)
【Model Year】H30.7~
【Compatible Grade】3BA-JB64W: XC, XL, XG 3BA-JB74W: JC, JL 【Notes】Includes vehicles equipped with optional Suzuki Safety Support. Compatible with both AT/MT.

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing Capacity】A
【Shape】F-1
【Processing】D-3
【Drilling】-
【Installation Time】2 hours

【Regarding the product】
● All hitch members are made-to-order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on model and material.
● Due to the material and type, some products are made-to-order only, so please note that cancellations and changes after ordering are not possible.
● For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. Please refrain from confirming compatibility after ordering.
・The photos are examples, and the installation method and shape vary depending on the car model. In some cases, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup.
※Delivery to corporations/companies, and limited delivery to some private residences.
Delivery is not possible in the following cases:
1. A room in an apartment building
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be identified as a corporate office building
4. Cases where the intrusion of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed problematic.

【About Delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

[Manufacturer] HONDA
[Model] S-MX
[Compatible vehicle model] RH1/2
[Model year] H8.11 to H14.1
[Compatible grade] All grades compatible

[Type] LTDII
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Towing capacity] A
[Shape] LTDII
[Processing] T-2
[Drilling] 3
[Installation time] 3 hours

[Regarding products]
● All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
● Depending on the material and type, some products are made to order and cannot be cancelled or changed after placing an order. Please be aware of this.
● For some vehicle models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・ Please confirm compatibility before placing an order. Please refrain from confirming compatibility after placing an order.
・ Photos are examples, and the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・ Returns and exchanges are not possible for made-to-order products.

[Shipping information]
・ Due to the shape of the product, it cannot be combined with other products.
・ Basically, payment by cash on delivery is not possible for direct shipments from the manufacturer.

*Cannot be shipped to a freight company's service center
*For corporations/companies and some limited home deliveries
We cannot accept delivery in the following cases:
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where the building cannot be determined to be a corporate office
4. Cases where it is determined that there is a risk of a delivery truck intruding
5. Other special circumstances that are deemed to hinder delivery

[About delivery]
Shipping costs to Okinawa Prefecture will be estimated separately each time.

Manufacturer: NISSAN
Car model: X-TRAIL
Compatible car model: TNT31/NT31
Model year: H19.8 - H27.2
Compatible grade: 25S/25X/20X [Note] Unconfirmed: DBA-NT31 (20S), DBA-T31 (20S/20X)

Type: LTD II
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

Towing capacity: B
Shape: LTD II
Processing: D-1, 3 / K-1
Drilling: -
Installation time: 3.5 hours

About the product:
All hitch receivers are ordered products. (Estimated delivery time: approximately 10 days to 2 weeks*) *Varies depending on car model and material.
Please note that some materials and types are made-to-order products, so cancellations and changes after ordering are not possible.
For some car models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

Disclaimer:
Please confirm compatibility before ordering. We cannot confirm compatibility after your order has been placed.
The photos are examples, and the installation method and shape may vary depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
As this is a build-to-order product, returns and exchanges are not possible.

Shipping information:
Due to the shape of the product, it cannot be combined with other products.
Basically, it is a direct shipment from the manufacturer, so cash on delivery is not possible.

*Cannot be shipped to a freight company's sales office.
*Delivery is limited to corporations/companies and some private residences.
Delivery is not possible in the following cases:
1. A room in a multi-unit dwelling.
2. Religious corporations, Shinto shrines, Buddhist temples.
3. Cases where it cannot be identified as a corporate building.
4. Cases where the entry of a delivery truck is deemed dangerous.
5. Other special circumstances where delivery is deemed to be obstructed.

About delivery:
Shipping costs to Okinawa Prefecture will be estimated separately each time.

● Can be attached to a tank frame up to 75 x 75 mm.
● Galvanized finish.
● Internal dimensions: 520 (L) x 300 (W) x 71 (H) mm

※ Please inquire about the delivery time for this made-to-order product.

【Product Specifications】
■ Hitch Ball Diameter: 2 inches
■ Mounting Frame Width: Compatible with 75mm
■ Mounting Hole Spacing: Approx. 77mm
■ Maximum Towing Weight: 1,588kg
■ Material: Plated Steel

【Note】Please be aware that plating may peel or scratches may occur during international shipping.
Please purchase with this understanding.

Information: A stainless steel type is also available. (Product Number TC-03SUSP)

granvia

[Compatible models] KCH/VCH10/16W/RCH11W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Spare tire cannot be removed
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

●Sold in units of 1 piece

●Inner diameter: 49.5mm
●Outer diameter: 50.8mm
●From the entrance tip to the brim: 7mm

For SOREX trailer with tire lock only

[Requests and Precautions for Ordering]
*Please provide the following trailer information when ordering: (model, year, and chassis number)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests when ordering."

●Sold in units of 1 piece.
●Oval type (for disc brakes)

■Set contents: stay, license lamp, rivet

[Please note] Riveters are required for installation.

There are two holes for attaching parts for Solex PWC trailers from 2013 onwards, vertically on the reflector.

■For trailer installation. With bolt ■Size: 160mm on one side
■Mounting bolt spacing: 65mm

●SOREX license lamp.

This is a relay kit for both 12V and 24V that can respond to problems with the towing vehicle's lights when connecting a trailer.

*We may not be able to respond depending on the type of towed vehicle or the condition.

【please note】
・This product does not come with connection terminals or extension wiring. Please prepare connection terminals, wiring, etc. separately.
- When extending the wiring, be sure to use a wire that is 0.75 square millimeters or larger.

●Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.

*Dimensions of part A in the image are 60mm type.
(A type with dimension A of 20 mm (product number SRX-121-01) is also available.)

●Quantity: Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.
*Dimensions of part A in the image are 20mm type. (A type with dimension A of 60mm (product number SRX-121-02) is also available.)

●O-ring for SOREX ball mount (SRX-082, SRX-123)●This is an O-ring to prevent the ball mount from wobbling.
[Quantity] 2 pieces per set

●Series: CONCORD
●Pitch size: 11/19
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Stock engine of SEA-DOO WAKE155 (2008-2018) (normal boat)
SEA-DOO GTX155 (2002-2009) stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.