When transporting a jet ski or boat on a trailer, ratchet straps are essential for securing the load. Failure to select and use them correctly can lead to serious accidents, such as the jet ski shifting or coming loose during transit. Whether you are using a trailer for the first time or have used one before, take this opportunity to review how to choose and use these straps properly.
What Are Ratchet Straps? Their Role in Securing a Trailer
Ratchet straps (also known as tie-down straps or lashing straps) are fastening straps designed to securely secure cargo using ratchet or cam buckles. When transporting a jet ski or boat on a trailer, multiple ratchet straps are used to keep the load from moving during vibrations, sudden braking, or cornering.
Improperly secured cargo can shift, throwing the trailer out of balance or, in the worst-case scenario, causing it to fall off. The Road Transport Vehicle Act also requires cargo to be securely fastened, making proper tie-down essential for both safety and legal compliance.
Types of Ratchet Straps and How They Work
Ratchet Type
This type uses a lever that moves up and down to tighten the strap securely. It can apply strong tension, making it ideal for securing heavy loads such as jet skis and boats. Because of its strong clamping force, it may damage fabric or soft materials, so using a protector or padding is recommended.
Cam Type (Cam Buckle)
This has a simple design where the strap is slid through the buckle to tighten it. It cannot produce as much tension as a ratchet type, but it can be quickly fastened and released, making it suitable for lightweight items, surfboards, and kayaks. Ratchet straps are generally used to secure jet skis.
How to Choose Ratchet Straps | 5 Key Points to Consider
1. Check the Load Capacity (LC)
Ratchet straps are marked with their LC (Lashing Capacity) and BS (Breaking Strength). When securing a single jet ski (averaging around 350–450 kg), it is important to choose straps with sufficient load capacity, taking into account the number of straps used and the weight of the load. Specifications vary by product, so always check the label or product specifications.
2. Strap Width and Length
Straps with a width of 25–50 mm are commonly used for securing trailers. Wider straps have a larger contact area and are less likely to cause scratches. The required length varies depending on the width of the trailer and the position of the tie-down points, so choose a length that suits your trailer. If the strap is too long, the excess may flap during transit, so choose an appropriate length or bundle the excess.
3. Hook Shape and Trailer Compatibility
Hooks come in several shapes, including J-hooks, flat hooks, and double J-hooks. Choosing a hook that matches the shape of the trailer's tie-down rail or eye bolt will ensure a secure connection. An incompatible hook can make the tie-down unstable, so check the shape of the trailer before purchasing.
4. Material and Weather Resistance
Because marine environments expose straps to saltwater, UV rays, and rain, polyester straps with high weather resistance are ideal. Nylon straps tend to stretch, which may reduce their effectiveness in securing a load. Choose metal components that are rust-resistant, and always rinse them with water and store them properly after use.
5. Number of Straps and Tie-Down Points
It is generally recommended to use at least four straps in total—two at the front and two at the rear to secure a jet ski. The recommended number may vary depending on the model and trailer design, so also refer to the manufacturer's instructions for the trailer and boat. More tie-down points provide greater stability, but it is also important to check that each strap is applying tension evenly.
Proper Installation and Tie-Down Tips
- Position the boat correctly in the center of the trailer: Check that it is resting evenly on both sides.
- Secure the hooks firmly: Attach the hooks to the boat's tie-down points, handle pole, or dedicated fastening hardware. Pay attention to the orientation of the hook to prevent it from coming loose.
- Tighten the straps without slack: For ratchet straps, move the lever repeatedly until the strap is securely tightened. Check by hand to ensure the strap is under appropriate tension.
- Bundle the excess strap: To prevent the excess strap from flapping during transit, bundle it together with tape or a rubber band.
- Recheck before departure: Make it a habit to stop in a safe place a few minutes after you start driving to recheck that the straps have not loosened.
Post-Use Maintenance and Storage
After use in a marine environment, always rinse the straps with fresh water to thoroughly remove salt from the metal parts. Allow the straps to dry before storing them in a place away from direct sunlight. If you notice fraying, cuts, rust, or deformation of the metal parts, the strap's strength may be compromised, so stop using it immediately and replace it with a new one. The lifespan of a ratchet strap varies greatly depending on the environment in which it is used. Regularly checking its condition is important.
Frequently Asked Questions (FAQ)
Q1. How many ratchet straps do I need?
For a jet ski, it is generally recommended to use at least four straps—two at the front and two at the rear. However, the required number may vary depending on the specifications of the trailer and boat, so check the manufacturer's recommendations.
Q2. Will overtightening damage the boat?
Overtightening may damage FRP materials or painted surfaces. Place a protector or towel where the hook makes contact, or use a dedicated soft loop.
Q3. Which is better: a ratchet strap or a cam strap?
For moderately heavy loads such as jet skis and boats, ratchet straps are recommended because they provide a secure, reliable hold. Cam straps are suitable for lightweight items or as secondary tie-downs.
Q4. Is it safe to continue using a degraded strap?
The strength of a strap that shows fraying, discoloration, or deformed metal parts cannot be guaranteed. For your safety, replace it immediately if you find any abnormalities.
Q5. Is the same tie-down method suitable for driving on highways?
Vibrations and crosswinds have a greater impact at highway speeds. We strongly recommend checking the tie-downs more thoroughly before departure and inspecting them again at a highway service area.
Summary | Do Not Compromise on Choosing Ratchet Straps for Safe Transport
Ratchet straps are essential safety components for securely transporting jet skis and boats on a trailer. By considering these five key points—load capacity, width, hook shape, material, and number of straps—you can significantly reduce the risks associated with transport. Because they are consumable items, do not forget to inspect them regularly and replace them when necessary.
JSP TOKAI offers a wide range of marine and water sports products, including ratchet straps for transporting jet skis and boats on trailers. If you are unsure which product to choose, be sure to check the JSP TOKAI online store. You will find a selection of genuine marine products carefully chosen based on hands-on experience.