Collection: Hitch member parts (vehicle side)

●Tight Japan MAX TRAILER 7-pole harness connector.
●The wiring is in a call shape, making it very easy to use.
■Material: Aluminum

SOREX hitch sticker
■Size: 157×33mm
■Sold in units of 1 piece

STKS01-BKHA

●This is a connector holder made by Tight Japan.
●Holder with optimal angle for quick storage of connectors
A convenient holder with a hook for hanging a safety wire.

■Material: Stainless steel

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

SOREX ZERO trailer sticker
■Size: 1000x50mm
■Sold in units of 1 piece

STKS15-ZERO17-B Black 1 piece
STKS15-ZERO17-W White 1 piece

SOREX trailer sticker
■Size: 510×51mm
■Color selection, sold in units of one piece

STK001-BLA
STK001-REA

Hitch ball cover ■ Suitable for ball sizes 1-7/8 inch / 2 inch

Red Yellow Blue Black

Product name: Wiring kit
Product number: SRX-006

This is a wiring kit for lights on the tow vehicle side.

[Kit contents]
■Wiring socket ■Wiring ■Connection tap x 6 pieces

■Towing vehicle side 7-pin type wiring connector kit for lights

■The wiring is a little longer than the conventional kit, and a wiring cover is included.

[Kit contents]
Wiring socket, 2m wiring, 7 connection taps, wiring cover

■It is attached to the mount socket of the hitch member, and the ball mount can be attached with the cap attached.

■Openable cover cap.

■Compatible with: Class III (50×50mm square type)

■Material: Made of ABS

●Tight Japan MAX TRAILER 7-pole harness connector (for EX).
●The wiring is in a call shape, making it very easy to use.
●The wiring is made longer than 0106-07.
■Material: Aluminum

●Trailer side waterproof connector

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

This is a relay kit for both 12V and 24V that can respond to problems with the towing vehicle's lights when connecting a trailer.

*We may not be able to respond depending on the type of towed vehicle or the condition.

【please note】
・This product does not come with connection terminals or extension wiring. Please prepare connection terminals, wiring, etc. separately.
- When extending the wiring, be sure to use a wire that is 0.75 square millimeters or larger.

●O-ring for SOREX ball mount (SRX-082, SRX-123)●This is an O-ring to prevent the ball mount from wobbling.
[Quantity] 2 pieces per set

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

The wiring socket can be installed at any position on the towed vehicle.

Made by SOREX

■7-pin type wiring socket for lights on the towing vehicle side

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■6-core electrical wiring
■Please use it for wiring hitch members, etc.
■Type: 6 poles
■Total length: 2m

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■As it is made of stainless steel, it is a rust-resistant item. (Brass steel inside the cylinder)

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

●Shaft diameter: 7mm, effective length: 20mm
●Steel chrome plating
●The protective rubber at the center reduces noise caused by vibrations while driving.
●It can be used not only as a trailer coupler but also as a door lock for cargo boxes, warehouses, etc. depending on your ideas.
●The key opens quickly with a 1/4 turn. The rubber cap and O-ring prevent dust and water from entering the key cylinder.
*[Product number: 30391] If used in conjunction with a trailer lock, you will have double peace of mind.

■Steel chrome plated
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX Class III
■Size: φ16mm x 85mm

Transporter Boat Trailer

■6-core electrical wiring
■Please use it for wiring hitch members, etc.
■Type: 6 poles
■Total length: 2m

■6-core electrical wiring
■Please use it for wiring hitch members, etc.
■Type: 6 poles
■Total length: 2m

It can be used by simply attaching it to the hitch ball.
The visual impact is also outstanding! !

This is a ball cover that is sure to stand out due to its large size.
*Please note that this may interfere with opening and closing the rear gate on some models of vehicles such as minivans.

Product name: Wiring for wiring kit (single item)
Product number: SRX-006-H

This is a single item for wiring and relay connector for towing vehicle side lights .
*Wiring socket is not included.

■Wiring ■Connection tap x 6 pieces

Ball mount with O-ring (SRX-071) to reduce rattling noise during towing
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Due to individual differences, processing may be required due to misalignment of hole positions.

【Notes on ordering】
*Please provide the "car model" so that the class can be stamped.
*Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
SOREX ball mounts are available in matte (SRX-123), mirror (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Types different from your existing mount may not be usable. Please be careful.

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

Stainless steel ball mount with O-ring (SRX-071) to reduce rattling noise during towing.
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Processing may be required due to misalignment of hole positions caused by individual differences.

【Precautions when ordering】
*Please provide your "car model" so that we can engrave the class.
*Cancellations, changes, and returns will not be accepted if the model confirmation result is not a mismatch.

【Information】
Solex ball mounts are available in matte (SRX-123), mirror finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

Steel Ball Mount
■Shaft Diameter: φ19mm
■For SOREX Square Type (SX3002) Hitch Members Only

※Hitch ball and quick-release pin are not included.
※Processing may be required due to misalignment of hole positions caused by individual differences.

【Notes on Ordering】
※Please provide your "vehicle model" for grade stamping.
※Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
Sorex ball mounts are available in matte finish (SRX-123), polished finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

・Material: Steel
・Plate thickness: 2.0mm
・Product details: Plate only (screws etc. not included)

Size: Please check A/B/C/D along with the image.
●L-shaped / Manufacturer: 0103-01 ■A: 60 /B: 95/C: 50/D: 35mm
●L-shaped long / Manufacturer: 0103-04 ■A: 60 /B: 95/C: 50/D: 90mm
●Straight* / Manufacturer: 0103-03 ■A: 115/B: 95/C: 50/D: 0mm
*Straight is a flat plate without bends

SOREX Genuine TM-004

For 5 tons
*Wiring kit and wiring bracket are not included.

This is a ball mount removable hitch bracket for Toyota Land Cruiser 70/80 series, Nissan Safari, Mitsubishi Pajero (excluding V78 and later), Isuzumyu, Jeep, etc. that have mounting holes in the rear frame or bumper.

■Bolt hole pitch = height: 45mm width: 85mm
■Standard ball mount (bottom) height: -123mm from the bottom of the mounting bolt

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit and wiring bracket are not included.

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm x 85mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

[Product Specifications]
■Material: Steel plating

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 6 inches

[Product Specifications]

■Material: Steel plating

■Applicability: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 4 inches

[Product Specifications]

■Material: Steel

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches *Individual differences may occur

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 3 inches

[Product Specifications]

■Material: Steel plating

■Applicability: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 2 inches

[Product Specifications]

■Material: Steel plating

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 8 inches

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each