Collection: trailer parts

Compatible with trailer slope rails, rail width 350 mm (center to center of rail)

By installing trailer slope rails, the JET can be loaded more smoothly, and the taillights, housing, etc. do not get submerged in water, so the trailer can be used for a long time.
It is possible.
Installation is easy, just attach the rail guide (included) to the trailer body.

● By installing a trailer slope rail, you can smoothly record the raising of the boat. Since the taillights, axle parts, etc. do not get submerged in water, the trailer will last longer.
● Since it is a 50x50 square pipe, there is no need to worry about the load when pulling it up with a winch.
(When pulling up, please support with 2-3 people. Forcibly pulling it up with only a winch may damage the winch.)
● When not in use, it can be easily stored inside the trailer and PWC body.
(Please note that it may not be possible to store it depending on the boat or trailer, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle part.
● The trailer side processing is simply attaching the rail guide to the rear frame of the trailer with U-bolts. )
* If the frame on the hub trailer side is low, the rear end of the slope rail will be close to the floor, which is dangerous, so please check.

Q. Can the "rail guide part" fit between the trailer's bunk rails and be attached to the rear frame? The size of the rail guide part is
420 mm wide.
In particular, if the rear end frame has a very deep R shape, the U-bolt may not fit. In such cases, if you prepare a larger U-bolt or similar, it will be possible.
* If it is attached to a frame with an R shape, the bottom of the boat may hit the rail guide part, so
please raise the bunk rail to adjust it. * If there is a license plate etc. at the attachment part, it is necessary to move the plate etc. (outside public roads)
* Depending on the compatibility between the boat and the trailer, the rail may not be able to be stored.
After installation, a space of approximately 85mm (height) x 71mm (width) is required for the rail to pass through.

[About payment and packaging]
For manufacturer-direct products
● Only handling fee (transfer bank). (Cash on delivery not accepted)
● Cannot be bundled

[About delivery]
If the recipient of this product is a private residence, an additional fee may be required for the billing amount.

●Size: Height 60 x Width 230 x Thickness 30mm
●Sales unit: 1 piece/left and right common shape
●24V compatible

*Water resistant specifications: Built to withstand water from above, such as rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■6-core electrical wiring set
■Please use it for wiring hitch members, etc.

【set content】
6-pole wiring 2m x 1
Single line 2m x 1
Interrupt terminal x 6

■6-core electrical wiring
■Please use it for trailer wiring, etc.
■Type: 6 poles
■Total length: 10m

■7-pin type wiring socket for lights on the towing vehicle side

■Material: Aluminum die-cast

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

-Size: 125 x 238 x 50mm (length x width x thickness)
●24V compatible
●Sold as one unit per side (common shape for left and right)

The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
Set includes raise lamp, smoothing cover, bumper base, and number bracket.
"RAYS Tail Lamp Kit" is also available. Product number 1216-61, 1216-62, 1216-63

●Size: 120 x 120 x 30mm (thickness)
●Symmetrical design (sold individually)

★Water-resistant specifications★
Designed to withstand water from above, such as rain or car washes.
Please note that the light should not be submerged in water, such as when launching a trailer into the water.
Water entering the lamp may cause damage.

back lamp
Size: Height 105 x Width 30 x Thickness 30mm

●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■This stay is for attaching the 7-pole connector of the hitch member.

■Material: Steel

■Plate thickness: 1.2mm
*Plate only (screws etc. are not included)

■Size details are listed in the image

It lights up in conjunction with the small light, improving the visibility of following vehicles.

●Sold in units of 1 piece.
●Size: 1 side 160mm

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■MAX TRAILER triangle reflector

■Size: 160mm on one side (with bolts)

■Upper and lower mounting holes

■Quantity: 1 piece

■M10 75x45 square long bolt for pipe

■Bolt size AxBxC: 150x63xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■1 piece
■Nut only

12×1.25p
Socket size: 21mm

■M10 75x45 square pipe horizontal bolt

■Bolt size AxBxC: 70x97xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x88xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 110x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x83xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 97x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 97x100xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x60xφ12

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 63x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 63x100xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

[Ordered products]

■Roller width: 220mm
■Bracket dimensions: 195x120x168mm (width x height x depth)
■Material: Steel

●For adjustable tower (75x45) ●When moving the trailer, use the carry handle for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when in a low position!

■Material: Steel ■Includes: Reinforcement stay, chain wire & electrode connector holder included.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

●For adjustable tower (75x45)
●When moving the trailer, the carry handle allows for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when sitting in a low position!

■Material: Stainless steel
■Includes: Reinforcement stay, chain wire & electrode connector holder included.

●When moving a trailer, it eliminates the inconvenience of not having a place to hold it or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Stainless steel

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

For W-MAX

●Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Steel
■Can be installed in two directions: front and back

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

■Material: Stainless steel ■Attachments: Chain & electrode connector holder included [Usage location] Attached to the triangular gathering part or coupler part, mainly used for 2-boat installations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

This is a [hard type] grip exclusively for the company's carry handles (product numbers: 0719-00, 0719-01).
●1 set of 2 pieces

[Conventional types have the following part numbers]
0719-02 Black
0719-03 Red
0719-04 Green

For 2-inch coupler, total length 2m

Extension coupler for situations where you cannot enter the water's edge.
*Cannot be driven with the coupler extend installed.
*Max Trailer exclusive

[Shipping Information]
・Due to the shape of the product, it cannot be combined with other products.
・Payment by cash on delivery is not possible as it is a direct shipment from the manufacturer.
・Shipping costs are per item.
・Shipping costs to Okinawa Prefecture will be quoted separately for each order.

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

Ideal for securing items in tight spaces or where there is no fastening allowance.
Its hookless design makes it very convenient for wrapping around objects.

■Belt length: 1,455mm
■Belt width: 25mm
■Working load limit: 400kg
■Breaking strength: 800kg

■Material: Stainless steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items".

■Material: Steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items"

● Loading the beach stand onto the trailer reduces dirt and damage inside the vehicle.

● Optional side storage boxes (part numbers: 0704-21, 0704-22) can also be installed (see image below).

〈Set contents〉
Main unit, U-bolts (50x50mm x 4, 75x50mm x 2), transom tie-downs, universal hooks

■ Size: H760 x W360 x D315mm

【Delivery information】
Shipping costs to Okinawa Prefecture will be quoted separately.

■Material: Stainless steel
■Sales unit: 1 piece

[For small cars with wire brake only]

●Size A:490 B:750 C:985 D:50-150 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●Size A:490 B:680 C:830 D:125 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●A retractable stand bar to prevent falls and damage to the license plate when washing the car without connecting the trailer to the car or maintaining the jet.

●Equipped with rubber that prevents rattling and chattering noises when running, making it extremely quiet.

■Material: Steel plating
■Mounting plate and bolt set included
*Maximum 50cm