Collection: PWC Parts & Supplies

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

Spare bolt for aluminum lock ring (UL32003) included with UNLIMITED lock grip
*Cannot be used with grips from other manufacturers such as ODI grips.

[Size] M4 x 12mm
[Material] Stainless steel (SUS)

【please note】
*Cannot be used with grips from other manufacturers such as ODI grips.
*Please be careful not to overtorque when tightening.

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible models]
For KAWASAKI 1200/1100 KEIHIN CDCV carburetor *We apologize, but we cannot accept inquiries regarding compatibility other than those listed above.

By changing the spring rate, it is possible to change the opening and closing timing of the vacuum valve of the CV carburetor.
●3 types x 1 each ●Spring rate 55, 60, 65

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

Compatible with: 8 holes for MIKUNI

●1 piece
●Weight: 15g
●Adjustable with 8 holes.
●Wire can be drawn from any position.
●The wide adjustment range of the carburetor wire provides uniform acceleration over the entire opening range.

【Compatible Models】Yamaha GP1800/VXR/VXS models 2011 and newer ■Material (Pipe): Aluminum Replaces the restrictive sound suppression system located between the water box and hull exit on watercraft. Reduces back pressure and harmful detonation, improving engine performance. Includes mandrel-bent, powder-coated aluminum tubing for corrosion resistance, and high-temperature silicone replacement couplers.

【Compatible Models】Yamaha FX models 2012 and newer
■Material (Pipe): Aluminum

Replaces the restrictive sound suppression system between the water box and the hull exit on watercraft.
Reduces back pressure and harmful detonation, improving engine performance.
Features mandrel-bent aluminum tubing powder-coated for corrosion protection,
and comes with high-temperature silicone replacement couplers.

【Compatible Models】
Sea Doo GTI 130 / GTX 170 / GTX 230 / RXT・GTX 300 ALL ('20-)
*For 2023 and later models, a siphon break delete kit (RS10123-SBD) is required separately.
■Material (pipe): Aluminum

Replaces the restrictive sound suppression system between the water box and the hull exit on watercraft.
Reduces backpressure and harmful detonation, improving engine performance.
Features mandrel-bent aluminum tubing powder-coated for corrosion resistance,
and includes high-temperature silicone replacement couplers.

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

●Inner diameter Φ60 ⇔ Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.
Can be used as a joint between 60mm and 70mm diameter pipes.

●Inner diameter Φ50⇔Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

-Inner diameter Ф147 x total length 85mm

Exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

【Compatible models】KAWASAKI
Exhaust port diameter Φ50mm
ULTRA310LX / ULTRA310LX-S /ULTRA160 /ULTRA300 /15F('09-) /ULTRA250X('08) /ULTRA260X /ULTRA LX('09-)

★For the following models with an exhaust port diameter of Φ60mm, please use part number: JL14001.
STX series ('00-'07) *excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Stylishly enhances the rear exhaust.
●Made from machined aluminum (A6061) for excellent strength and corrosion resistance.
●A cover flange with chemical polished anodizing and superior design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

■Pattern: Border ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

[Note] Adhesive is required for attachment.

【Compatible Models】
SEA-DOO RXT-X 300 (2016~) - Recommended for limited engines and modified engines
SEA-DOO RXP-X 300 (2016~) - Recommended for limited engines and modified engines
SEA-DOO GTX-L 300 (2016~) - Recommended for limited engines and modified engines
SEA-DOO RXT-X 325 (2024~) - Recommended for limited engines
SEA-DOO GTX-L 325 (2025~) - Recommended for limited engines

*Limited: For watercraft with modified parts other than engine components, such as intake/exhaust and intake gate.
*Modified: For race watercraft with modified engine components.

●Series: CONCORD
●Pitch Size: 14/19
●3-Blade
●Material: Stainless Steel
●Product Contents: Impeller, Impeller Seal

【Features of Concord Impellers】
This impeller combines both unique acceleration and maneuverability, featuring a leading edge with an innovative blade design.

*To select the optimal pitch, please consider the engine condition and other factors.

【Compatible models】
Recommended for stock engines of SEA-DOO RXT-X 300 (2016~) (normal craft)
Recommended for stock engines of SEA-DOO RXP-X 300 (2016~) (normal craft)
Recommended for stock engines of SEA-DOO GTX-L 300 (2016~) (normal craft)

●Series: CONCORD
●Pitch size: 13/18
●3-blade
●Material: Stainless steel
●Product contents: Impeller, impeller seal

【Features of Concord Impeller】
This impeller features a unique leading-edge blade design that delivers both exceptional acceleration and maneuverability.

※To select the best pitch, please consider the engine condition and other factors.

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO RXT-X 300 (2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO RXP-X 300 (2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX-L 300 (2016)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●Series: CONCORD
●Pitch size: 13/16
●3 blades
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Although you cannot expect to increase the maximum speed by installing it,
In the low and medium speed range, you can get explosive power that is incomparable to the genuine impeller.

[Compatible models]
Stock engine recommended for SEA-DOO RXT-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO RXP-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO GTX-L 300 (2016-) (normal boat)

■Leading peller: 4 blades
■Main propeller: 4 blades

*Please use the genuine impeller tool (529035956) for the impeller wrench.

●Series: CONCORD
●Pitch size: 13/16
●4 blades
●Material: Stainless steel
●Product contents: impeller, impeller seal

You can experience the acceleration power at medium and low speeds, which is different from 3 blades.

[Compatible models]
Stock engine recommended for SEA-DOO RXT-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO RXP-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO GTX-L 300 (2016-) (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

【Compatible Models】SEA-DOO
WAKE PRO215 (2008-09)

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to sewing.

Special Features
1. 【Tape】 Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Reinforcement】 Non-woven fabric is used as reinforcement on the mirror parts to prevent rubbing.
3. 【Handle】 The handle area is reinforced with double-layered fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the time of arrival.
* As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.