Collection: Parts for Kawasaki

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

【Made-to-order product】Please note that it may take approximately one month to deliver the product after your order.
※Cancellations are not accepted after an order has been placed for made-to-order items. Thank you for your understanding.

【Compatible models】KAWASAKI
STX160LX / STX160X / STX15F / STX12F

Billet Sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

[Made-to-order product] Please note that it may take about one month from the time of order.
※Cancellations are not possible after ordering due to this being a made-to-order product. Thank you for your understanding.

[Applicable models] KAWASAKI SX-R 1500 4-stroke

Billet Sponson Type 2

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

Exhaust nozzle for SE ULTRA310/300/260/250
This part adds a stylish touch to your exhaust outlet.

Exhaust nozzle for SE ULTRA310/300/260/250
This part is designed to give your exhaust outlet a stylish look.

Applicable models: KAWASAKI
SX-R1500

The exquisite length and unique shape provide mature performance in all aspects, including straight-line stability, top speed, and cornering.

【Compatible models】KAWASAKI
15F / 15S / 12F / STX-R

This revolutionary gate attaches wings to the intake port to further increase pump pressure.

【Compatible Models】 KAWASAKI 1500SX-R 4-stroke

● Race-proven design delivers significant handling improvement over stock 1500SXR sponsons.

● Backing plate is precision machined from high-strength billet aluminum and anodized to prevent corrosion.

● Features a bulletproof fin mounting system, including three anchor points with billet inserts. ● Sponson depth and fore/aft position are adjustable. ● Easy installation requires no drilling.

●Compatible models: KAWASAKI
ULTRA310X/310LX/310R/310SE
ULTRA300X/300LX
ULTRA260X/260LX
ULTRA250X
ULTRA LX
PRO Series Sponsons.
Achieves agile cornering.
Excellent grip stability in corners.

[Compatible models] KAWASAKI ULTRA250/LX/15F

Exhaust port only

●Made of aluminum with taper processing.
●The tail side becomes stylish.

■Size: Hull IN side 60φ

【Compatible with】KAWASAKI
ULTRA300/260/250 (2008)

※For use with genuine water boxes of ULTRA300 (2011-), ULTRA250/260 (2008-2010),
please also use "Part Number: RK16090-08-ERC Conversion Coupler."

●Improves exhaust efficiency and reduces back pressure.

●ULTRA models from '08 onwards include a large-diameter exhaust outlet.

【Compatible Models】
KAWASAKI NEW SX-R

●Provides a steady supply of cool air to the engine, significantly improving acceleration and RPM.

●This system draws cool air from the front of the engine compartment near the hull vents.

●Replaces the restrictive stock airbox with a high-volume, precision-molded intake tube.

●Cool air enters the system through an oversized K&N filter element.

【Compatible Models】KAWASAKI ULTRA 310/300

The extra-large filter and large 4-inch diameter pipe deliver air to the supercharger without being affected by the heat in the engine compartment, improving both acceleration and top speed.
Includes a water-repellent pre-filter.

■Filter mounting diameter: 4 inches (approx. 100mm)

Applicable models:
KAWASAKI
ULTRA 260/250

By increasing the air intake and sending a large amount of air to the engine,
low-to-mid-range acceleration is improved, and top speed is also increased.

●Series: CONCORD
●Pitch size: 16/24
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

KX-CD-1624 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 16/21
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/23
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

KX-CD-1523 Stock engine recommended (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 10/16
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA LX stock engine, limited engine recommended

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/22
●3 blades
●Applicable pump diameter: 160mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009, rubber SL009)

[Compatible models]
KAWASAKI ULTRA 310X/310LX/310R/310X SE/300X/300LX

KR-CD-1522 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/21
●3 blades
●Applicable pump diameter: 160mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009, rubber SL009)

[Compatible models]
KAWASAKI ULTRA 310X/310LX/310R/310X SE/300X/300LX
KR-CD-1421 Stock engine recommended (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/20
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
SX-R 4-stroke stock engine recommended (normal boat)

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/16
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
1500SX-R 4-stroke limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 16/22
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/21
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
1200STX-R stock engine recommended (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/21
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F/15S Stock engine recommended (normal boat) / Limited engine recommended
STX-12F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/20
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
STX-12F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended
900STX 01-06 Limited engine recommended/Modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

■Series: CONCORD
■Pitch size: 13/19
■3 blades
■Applicable pump diameter: 148mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
STX-12F stock engine recommended (normal boat)
1100STX DI stock engine recommended (normal boat)
1100STX stock engine recommended (normal boat)
1100ZXI stock engine recommended (normal boat)
900STX 01-06 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.