Collection: engine parts

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Please use compatible main jets and slow jets for CV and CDCV carburetors.
■WSM products
*Some products may not have the number stamped on them.
*Due to the material, some discoloration that does not affect use may be observed.

006-7080

006-7110　110
006-7115　115
006-7120　120
006-7125　125
006-7128　128
006-7130　130
006-7132　132
006-7135　135
006-7138　138
006-7140　140
006-7142　142
006-7145　145
006-7148　148
006-7150　150
006-7152　152
006-7155　155
006-7158　158
006-7160　160
006-7162　162
006-7165　165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fittings used when removing the carburetor choke shaft.

[For KEIHIN]
006-538 Primer Inlet
006-539 Blind Cap

This is a cap to be installed when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

【Compatibility】 MIKUNI SBN Carburetor
006-438 for SBN38mm
006-444 for SBN44mm
006-446 for SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetors.
●Kit includes: shaft, butterfly, E-clip, seal, bushing, nylon washer

●Main jet for CV cab and CDCV cab.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).

[Compatible models]
KAWASAKI Kawasaki
YAMAHA
SEADOO
*Processing to the hull is required for all models of all manufacturers.
*For models with a vent function (fuel tank pressure punishment valve) on the fuel cap, a separate tank pressure release is required.

Durable billet aluminum finish.

By installing this fuel filler on SEADOO boats and YAMAHA boats,
UNLIMITED billet fuel cap [Product number: UL030, UL036] etc.
Fuel cap for KAWASAKI can now be used.

General purpose
*If used on a model with a vent function (fuel tank pressure relief valve) on the fuel cap, a separate pressure relief must be provided.

Set of machined aluminum fuel cap and filler.
It has a built-in fuel hose that prevents fuel from blowing back.
Double line hose structure.

[Compatible models]
SEA-DOO 4-stroke ALL model (*excluding SPARK)

*Please use the genuine O-ring when using.

The oil cap can be removed without special tools when changing the oil.
It's very stylish and makes the engine room stand out.

UL53001SL Silver
UL53001OR Orange
UL53001RD Red
UL53001YL Yellow

[Compatible models] KAWASAKI
1500SX-R New SX-R
800SX-R
800X-2
STX900

Aluminum billet exhaust cover
Not only the 1500SX-R but also Kawasaki's stand-up 800 series can be installed.
Contrast cuts with a wide variety of colors,
This contributes to weight reduction while creating a luxurious rear view.

UL14020BK Black
UL14020SL Silver
UL14020GR Green
UL14020GM Gunmetal

[Applicable models] All KAWASAKI 4-stroke models

Performance dress-up parts with high quality strength and precision!
Weight reduction has also been achieved by simplifying the air suction valve.

*In order to install this part to Kawasaki's SC model, it is necessary to remove and install the head pipe.

[Compatible models] KAWASAKI Kawasaki
650/750/800/900/1100 engine

The inside of the engine room stands out.
*Please use the genuine O-ring when installing.

UL044SL Silver
UL044BK Black
UL044GR Green
UL044RD Red
UL044BL Blue

[Applicable models] KAWASAKI 4-stroke

*When installing, please use the genuine O-ring (92055-1295).

Make your personal watercraft's genuine cam cover stylish! Dress up your engine room.

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible models]
For KAWASAKI 1200/1100 KEIHIN CDCV carburetor *We apologize, but we cannot accept inquiries regarding compatibility other than those listed above.

By changing the spring rate, it is possible to change the opening and closing timing of the vacuum valve of the CV carburetor.
●3 types x 1 each ●Spring rate 55, 60, 65

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

Compatible with: 8 holes for MIKUNI

●1 piece
●Weight: 15g
●Adjustable with 8 holes.
●Wire can be drawn from any position.
●The wide adjustment range of the carburetor wire provides uniform acceleration over the entire opening range.

【Compatible Models】Yamaha GP1800/VXR/VXS models 2011 and newer ■Material (Pipe): Aluminum Replaces the restrictive sound suppression system located between the water box and hull exit on watercraft. Reduces back pressure and harmful detonation, improving engine performance. Includes mandrel-bent, powder-coated aluminum tubing for corrosion resistance, and high-temperature silicone replacement couplers.

【Compatible Models】Yamaha FX models 2012 and newer
■Material (Pipe): Aluminum

Replaces the restrictive sound suppression system between the water box and the hull exit on watercraft.
Reduces back pressure and harmful detonation, improving engine performance.
Features mandrel-bent aluminum tubing powder-coated for corrosion protection,
and comes with high-temperature silicone replacement couplers.

【Compatible Models】
Sea Doo GTI 130 / GTX 170 / GTX 230 / RXT・GTX 300 ALL ('20-)
*For 2023 and later models, a siphon break delete kit (RS10123-SBD) is required separately.
■Material (pipe): Aluminum

Replaces the restrictive sound suppression system between the water box and the hull exit on watercraft.
Reduces backpressure and harmful detonation, improving engine performance.
Features mandrel-bent aluminum tubing powder-coated for corrosion resistance,
and includes high-temperature silicone replacement couplers.

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

●Inner diameter Φ60 ⇔ Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.
Can be used as a joint between 60mm and 70mm diameter pipes.

●Inner diameter Φ50⇔Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

-Inner diameter Ф147 x total length 85mm

Exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

【Compatible models】KAWASAKI
Exhaust port diameter Φ50mm
ULTRA310LX / ULTRA310LX-S /ULTRA160 /ULTRA300 /15F('09-) /ULTRA250X('08) /ULTRA260X /ULTRA LX('09-)

★For the following models with an exhaust port diameter of Φ60mm, please use part number: JL14001.
STX series ('00-'07) *excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Stylishly enhances the rear exhaust.
●Made from machined aluminum (A6061) for excellent strength and corrosion resistance.
●A cover flange with chemical polished anodizing and superior design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

#275500996 (core filament only)

●SGS Gasoline Pump Core Filament Set ●This is an inexpensive aftermarket part for repair with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 engine
●Genuine part number (OEM): 420892735

●SGS piston ASSY (piston & piston ring)
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

Valve Guide

Performance equivalent to SEA-DOO genuine part number (OEM): 420253929 etc.

●Valve guide for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 19 in the third photo.

Exhaust Valve
SEA-DOO genuine part number (OEM): 420254682 etc.

●SGS Exhaust Valve●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is #6 in the 3rd photo.

Intake Valve
SEA-DOO genuine part number (OEM): 420253163 etc.

●SGS Intake Valve●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is number 7 in the 3rd photo.

Valve Spring

Performance equivalent to SEA-DOO genuine part number (OEM): 420838280 etc.

●Valve spring inside for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 10 in the third photo.

Valve Spring

Performance equivalent to SEA-DOO genuine part number (OEM): 420238180 etc.

●Valve spring outside for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 9 in the third photo.

Valve Spring Retainer

Performance equivalent to SEA-DOO genuine part number (OEM): 420254283 etc.

●Valve spring tensioner for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 11 in the third photo.

Exhaust nozzle for SE ULTRA310/300/260/250
This part adds a stylish touch to your exhaust outlet.

Exhaust nozzle for SE ULTRA310/300/260/250
This part is designed to give your exhaust outlet a stylish look.