Collection: Consumables/Maintenance

[Contents] 2L
[How to use] For removing red rust, blue rust on the hull, removing stains from the wood of the deck, and cleaning light oily substances.

It does not cause corrosion damage to painted surfaces or metal surfaces of the hull, and the luster of the hull does not disappear.

▼How to use▼
Wet the area to be cleaned with water before use.
For normal use, dilute it 3 times and adjust the concentration depending on the degree of dirt.
Using rubber gloves, thoroughly soak a brush, sponge, or cloth in detergent and scrub depending on the degree of dirt.
Be sure to rinse thoroughly with plenty of tap water within 2 minutes to ensure that no Hytrail ingredients remain.
Wipe off moisture with a dry cloth.

*Please try it in an inconspicuous place before use.
*Do not leave it on for more than 2 minutes as it may change color.

Notes
・Never use a spray bottle.
・Do not use on glass surfaces such as automobiles or aluminum parts of vehicles.
・Please do not use the product under the blazing sun or when the product is hot, as stains and uneven color may occur and will be difficult to wipe off.
・Please do not use coatings (mirror finishing, etc.) or painted areas as they will peel off.

This is a coating agent formulated with fluorine-modified silicone.
It protects and polishes the gelcoat surfaces of boats and PWC!
It restores and polishes the black color of resin moldings and gunwales!

■Application Guide:
Aerosol 420ml, Coverage Area: Approx. 3-5.24 feet. Two cans for boats, one can for PWC.

■Application Method
1. Clean and dry the application area to remove dirt, dust, etc., using a cleaning agent.
2. Apply Marine Glass Coat and spread it evenly with a microfiber cloth or similar material.
3. Allow it to dry for approximately 3-8 hours at room temperature.

●Marine Glass Coat is a hull coating agent formulated with fluorine-modified silicone.
●By forming a glass-like film on gelcoat and painted surfaces, it provides a glossy finish,
and its water-repellent effect reduces the adhesion of dirt and rust, making subsequent cleaning easier◎
●It hardens easily at room temperature, allowing customers to easily apply the coating themselves.
Since it can be used on FRP, it can be applied not only to boat hulls but also to camper shells, etc.♪

【Disclaimer】
*Due to container characteristics, shipment to Okinawa Prefecture and remote islands of each prefecture is not possible.
*Due to product characteristics, some products cannot be bundled.

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

[Application] For stubborn stains such as black spots on exhaust ports.
[Applications] FRP, metal, painted surfaces
[How to use] Wait for a while after spraying, then rinse with a hose.

Removes especially stubborn dirt that floats to the waterline during navigation.
Can be used on FRP, metal, and painted surfaces. It is also effective for removing black stains from exhaust ports.
●Capacity: 650ml

[Outlet reason] Special price for stock replacement

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.

●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

POWERBUILT Ratchet Box Handle 12mm

[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.

POWERBUILT Ratchet Box Handle 10mm

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

[Size] Total length 15cm
[Application] Stops leaks by clamping the hose [Compatible] Hose diameter up to 13 mm

The lock ring in the middle of the clamp moves freely and locks the hose in the crushed position.
To release it, simply squeeze it again and return the lock ring to the lever's raised position.