Collection: Body Parts

[Compatible models]
SEA-DOO SRX/SRZ

■Material: Aluminum

[Compatible models]
SEA-DOO SR 24mm shaft

■Material: Aluminum

[Compatible models]
YAMAHA YD (Concorde)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
KAWASAKI KA/KF/KG
YAMAHA YF/YG/YH (※)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA
YD (excluding Concorde) 18mm shaft
*For 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA Yamaha 15mm shaft
YB/YD (excluding Concorde)
*Part number "SL009" is compatible with 760RZ/760VN and XL800.

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

[Compatible models]
KAWASAKI Kawasaki :KH
SEA-DOO: ALL (excluding SR/SRX/SRZ)
YAMAHA Yamaha: YQ(※)

(*) YAMAHA 760RZ/760VN, XL800 is compatible with product number "SL009".

[Reason for outlet]
Special price for stock replacement.
★There is rust on the included impeller wrench (see image)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Applicable model] YAMAHA 700XL (99-04 model) for stock engine

■Accessories: Impeller wrench only (shaft holder not included)

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/14
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Drain Plug

●OEM Part Number: 292002022

●This is an aftermarket replacement part that offers performance equivalent to OEM parts at a lower cost.

Equivalent to genuine part (OEM part number: #293200087)

●This is an inexpensive aftermarket repair part with performance equivalent to that of a genuine part.

[Applicable] For SEA-DOO pump diameter 159mm pump (for 260/255/215 horsepower)

BRP OEM part number: 267000372

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

[Compatible models] SEADOO Spark
●Genuine part number (OEM): 267000925, etc.

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

【Made-to-order product】Please note that it may take approximately one month to deliver the product after your order.
※Cancellations are not accepted after an order has been placed for made-to-order items. Thank you for your understanding.

【Compatible models】KAWASAKI
STX160LX / STX160X / STX15F / STX12F

Billet Sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

【Made-to-order product】Please note that it may take approximately one month from the time of order.
※Cancellations are not possible after ordering made-to-order items. Thank you for your understanding.

【Compatible models】SEA-DOO RXT-X300 (2018-2020) / GTX-L300 (2018-2020)

Adjustable sponsons.
The base plate is made from machined aluminum.

[Made-to-order product] Please note that it may take about one month from the time of order.
※Cancellations are not possible after ordering due to this being a made-to-order product. Thank you for your understanding.

[Applicable models] KAWASAKI SX-R 1500 4-stroke

Billet Sponson Type 2

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order product] Please note that it may take approximately one month from the time of order.
*Orders cannot be canceled as they are made-to-order. Thank you for your understanding.

[Compatible models] SEADOO SPARK
[Color] Silver (*Photo shows pink; actual product will have the pink part in silver)

Billet Sponsons
Strong and cool finish with a machined aluminum base

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

Applicable models: KAWASAKI
SX-R1500

The exquisite length and unique shape provide mature performance in all aspects, including straight-line stability, top speed, and cornering.

[Compatible Models]
KAWASAKI 440/550

Significantly improves straight-line stability at high speeds.

[Compatible models]
KAWASAKI 650X2

Straight-line stability at high speeds is significantly improved.

【Compatible models】KAWASAKI
15F / 15S / 12F / STX-R

This revolutionary gate attaches wings to the intake port to further increase pump pressure.

【Compatible Models】
YAMAHA FZR FZS

●Mirrorless design creates a stylish and racy look.

【Compatible models】YAMAHA SJ (2021 and later models)
Yamaha SuperJet (TR-1)

PRO Series sponsons.
Position can be changed to suit your riding style.
Achieves agile cornering.
Excellent stability and grip in corners.

【Please note】
・If marked "取り寄せ" (backorder) or out of stock, please allow extra time for delivery.
・As this is an overseas order product, cancellations, returns, and exchanges are not accepted after an order has been placed.

【Compatible Models】YAMAHA
EX (2017-)
EXR

PRO Series Sponsons.
Allows for position changes to suit your riding style.
Achieves agile cornering.
Provides excellent grip stability in corners.
Fins are 4-way adjustable

【Compatible models】YAMAHA SHO ('12-) / SVHO / FZS ('14-)
2012-2018 FX CRUISER HO (1.8L)
2012-2016 FX SHO (1.8L)
2012-2016 FX CRUISER SHO (1.8L)
2012-2018 FX HO (1.8L)
2014-2018 FX CRUISER SVHO
2014-2018 FX SVHO
2014-2016 FZR
2014-2016 FZS

●These are PRO series sponsons.
●You can adjust the position to suit your riding style.
●They allow for agile cornering.

[Compatible model] YAMAHA SJ (2021 model)

The intake gate is the part that serves as the inlet for the water flow that sends water to the pump case,
and it improves contact with the water surface.

【Applicable Models】YAMAHA FZS SVHO (14-16)

This part serves as the water inlet, feeding water to the pump,
and has the effect of improving grip on the water surface.

Applicable Models: YAMAHA SJ (2021 Model)

Enhances top speed and improves handling.

[Compatible models]
YAMAHA FZS/FZR (up to 2013 model)

●Improves top speed and handling performance.

Applicable models: YAMAHA SJ (08-20)
Increases top speed and improves handling.

【Compatible Models】
SEA-DOO GTX SC 185 / GTX215 / RXP 215 / RXT 215 / RXP-X 255 / RXT-X 255

●Blocks off the OPAS and improves handling.

【Compatible Models】SEADOO SPARK

【Compatible Models】SEADOO
RXT-X (2012-2017)
RXP-X (2012-2020)

Faceplate only

Applicable models: SEADOO
Model years: 2005-2011
GTX / RXT / RXP / RXT-X / RXP-X

PRO Series Sponsons

2003-2004 SEA-DOO GTX SUPERCHARGED 185
2005-2008 SEA-DOO GTX LIMITED 215
2005-2009 SEA-DOO GTX 155
2005-2007 SEA-DOO RXP 215
2005-2009 SEA-DOO RXT 215
2005-2008 SEA-DOO WAKE 155
2006 SEA-DOO GTI PRO 130
2006-2010 SEA-DOO GTI SE 130
2007-2010 SEA-DOO GTI SE 155
2007-2009 SEA-DOO WAKE 215
2008-2010 SEA-DOO RXP-X 255
2008-2009 SEA-DOO RXT-X 255
2009 SEA-DOO GTX LIMITED IS 255
2009 SEA-DOO RXT IS 255
2010-2017 SEA-DOO GTX 155 (IC)
2010 SEA-DOO GTX IS 215
2010-2011 SEA-DOO RXT IS 260
2010-2016 SEA-DOO GTX LTD IS 260
2010-2011 SEA-DOO RXT-X 260 (IC)
2010-2012 SEA-DOO WAKE PRO 215 (IC)
2011-2016 SEA-DOO WAKE 155 (IC)
2011-2017 SEA-DOO GTI 130 (IC)
2011-2013 SEA-DOO GTI SE 155 (IC)
2011 SEA-DOO GTX 215 (IC)
2011-2013 SEA-DOO RXT 260 (IC)
2012 SEA-DOO GTX S 155 (IC)
2012-2016 SEA-DOO GTR 215
2016 SEA-DOO GTX LIMITED 300
2017-2019 SEA-DOO GTR 230
2017-2019 SEA-DOO GTR-X 230
2017 SEA-DOO GTX LIMITED S 260

Applicable models: SEA-DOO SPARK

This part serves as the inlet for the water flow that feeds the pump, and it has the effect of improving the grip on the water surface.

Intake Gate

【Compatible Models】SEA-DOO
RXP-X300 (2016-2020)
RXP-X260 (2012-15)

This part serves as the inlet for the water flow that feeds into the pump,
and it has the effect of improving the grip on the water's surface.

Intake Gate

【Compatible Models】 KAWASAKI 1500SX-R 4-stroke

● Race-proven design delivers significant handling improvement over stock 1500SXR sponsons.

● Backing plate is precision machined from high-strength billet aluminum and anodized to prevent corrosion.

● Features a bulletproof fin mounting system, including three anchor points with billet inserts. ● Sponson depth and fore/aft position are adjustable. ● Easy installation requires no drilling.