Collection: Best Selling Products

This neoprene life jacket is comfortable and gentle on the skin.
The front zipper and two straps provide an excellent fit and are suitable for intense movement.
■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)
■ Lifesaving whistle equipped

■ Suitable chest size
S: 84- 94cm
M: 94-104cm
L:104-114cm
XL:114-124cm

■ Actual outer dimensions when laid flat (chest circumference (inner dimensions)/total length/body length cm)
M: 106(100)cm / 58cm / 21cm
L: 112(108)cm / 60cm / 22cm
XL: 126(120)cm/ 60cm/ 22cm
*Please note that there may be some errors due to measurements taken by our staff.

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

Convenient for moving trailers.

Product name: Coupler handle Product number: SRX-030

One M12 bolt included

*For installation on trailers with inertia brakes,
A separate handle mounting bracket is required.

Bow stop extension kit compatible with SOREX ZERO series.
( 500B / 500BEE / 500BXE / 500B BUE / 500B BAE / 500S / 500SXE / 500ZA / 550B / 550S )

If you feel that the center of gravity of the trailer and hull is too far forward for Kawasaki ULTRA series, STX series, YAMAHA FX-HO series, FX-SHO series, or FX-SVHO series,
this kit allows you to shift the hull's center of gravity backward.

■Compatible with: SOREX ZERO trailers
■Contents: Main unit, mounting parts (see images for details)
*This product does not include a winch, strap, bow roller, or mounting bolts.

This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

iBR Boot/Bellow for SEA-DOO
・Equivalent to SEA-DOO genuine part numbers (OEM): 268000186, 268000338
・Location of use: Refer to number 50 in the third image.

■Additional Information
When replacing, parts 60 and 70 (clamps) in the diagram must also be replaced at the same time.
These are included with this product, but if you wish to purchase only the clamps, only genuine parts are available.
【60】509000529
【70】293650099

- Leg length 20 inches
- DuraStretch polyester body 8% spandex
- Adjustable closure
Zipper fly
- Hidden zippered side pockets with key loops
- Full body self-fabric panels and piping
- Sublimation and embroidery logo syo-tu
Self-fabric waistband
- Triple stitched crotch panels on all sides
- Custom Trim

■Material: 92% polyester, 8% spandex
■Specifications: Zippered pockets on both sides and right leg

■Jetpilot recommended waist size: 30 inches (78-82 cm)
32 inches (82-86 cm)
34 inches (84-88 cm)
36 inches (86-90cm)

*Applicable waist size varies depending on the design.

Board shorts, surf shorts, swimming trunks, beach, pool, resort, jet ski, water bike, wakeboard, surfing, flyboard, kite surfing, famous brand, popular, JET-PILOT, America, Australia, outdoor, marine activities, SURF WAKEBOARD, SUP, paddle board, kayak, canoe, trekking, river play, jet ski

【Manufacturer】MAZDA
【Model】MPV
【Compatible Vehicle Model】LY3P
【Model Year】H18.2～H20.1
【Compatible Grades】23C-Sporty Package, 23T, 23C 【Notes】2WD/4WD compatible

【Type】STD
STD:Steel, LTD:Stainless Steel, LTD II:Stainless Steel

【Towing Capacity】C
【Shape】F-1
【Processing】D-1・3
【Drilling】2
【Installation Time】 2 hours

【Regarding the product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made to order and cannot be canceled or changed after ordering. Thank you for your understanding.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing an order. Please refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup
※Delivery limited to corporations/companies or some private residences
In the following cases, delivery cannot be accepted.
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed problematic

【About Delivery】
Shipping costs for delivery to Okinawa Prefecture will be estimated separately.

7-Pin Wiring Socket for Trailer Lights

■ Material: Die-cast aluminum
■ Compatible with: TIGHTJAPAN, SOREX, SUNTREX
※Wiring sold separately

●SEA-DOO Genuine Relay 30Amp

278002822 → 278003828

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once an order is confirmed, we promptly place the order with the manufacturer. Therefore, cancellations or changes to the order are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after understanding these conditions.

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

This is an authentic supercharger overhaul kit for SEA-DOO 255/215 HP (16-tooth).

OEM #: 420881102

【Compatible Models】
MakeModelCC / HPYear
Sea-DooGTR 21515032012-2016
Sea-DooGTX LTD Super Charged 21515032006-2016
Sea-DooGTX LTD Super Charged 25515032009
Sea-DooGTX LTD Super Charged 26015032010-2016
Sea-DooGTX Super Charged 21515032008-2013
Sea-DooGTX Wake Pro 21515032009-2016
Sea-DooGTX Wake Super Charged 21515032007-2008
Sea-DooRXP Super Charged 21515032006-2009
Sea-DooRXP X 25515032008-2011
Sea-DooRXP X 26015032012-2015
Sea-DooRXT is 25515032009
Sea-DooRXT is 26015032010-2012
Sea-DooRXT Super Charged 21515032006-2010
Sea-DooRXT X 25515032008-2009
Sea-DooRXT X 26015032010-2016

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
As we will promptly place an order with the manufacturer once your order is confirmed, cancellations or changes to your order initiated by the customer will not be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We ask for your understanding and request that you place your order accordingly.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.

■Application: Winch strap
■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-60S large hook 6.0m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

Same product as jet launcher standard equipment.

■10Ф
■Made of stainless steel
jet launcher repair parts

■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63

Neoprene boots with excellent heat retention and elasticity. Easy to remove.
It is an outer zipper.
The fit can be adjusted using the belt on the instep.
The thick outsole provides a firm grip and cushions the impact.

Personal Watercraft (PWC) Jet Ski Kawasaki
JETSKI Jet Ski YAMAHA Marinejet Marine Jet BRP SEADD High Cut Zipper Neoprene

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

This is a genuine Yamaha hose adapter.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer's convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Thank you for your understanding and cooperation.

■It is attached to the mount socket of the hitch member, and the ball mount can be attached with the cap attached.

■Openable cover cap.

■Compatible with: Class III (50×50mm square type)

■Material: Made of ABS

[Contents] 1.9L
【how to use】
1. Remove dirt such as mud with plenty of water.
2. Mix boat soap and water to remove large stains such as oil soot.
*Although it is used diluted with water, please use the undiluted solution on heavily soiled areas.

[Application] For FRP parts of boats and campers.

Meguiar's Boat Soap has a rich and fine lather.
It removes bubbles easily and does not leave a white residue.
Because it is a gel-like liquid, it does not drip easily and has good work efficiency, and can be cleaned with fine foam.

●Includes importer's Japanese instruction manual

[Product specifications]
■Material: Plastic
■Size: 76φ×127mm
■Hole diameter: 12mm

●Small and lightweight type makes it convenient to move!
●You can also set up a course or float ropes, etc.

■1 point
■Please choose the size you need from 4 different heights.
ST-026-05: 190mm
ST-026-01: 230mm
ST-026-07: 245mm
ST-026-03: 270mm

[Ordered products]

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

■Quantity: 2 pieces 1 set
■Support: Common for regular cars and light cars

[Compatible models] YAMAHA Superjet (2021)

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

■Compatible with: JL81400 Beach tote tires only
(We do not know whether it is compatible with other products or products from other manufacturers.)

■Sales unit: 1 piece
■Material: Nylon
*Nylon pin bearing only. Other parts are not included.

■Material: Steel plating

[Caution] The plating may peel off or be scratched during transportation from overseas.
Please understand this before purchasing.

■Details
[Product number: Ball diameter / Housing / Maximum towing weight / Mounting hole spacing]
TC-01: 2 inches / 50.0mm compatible / 1,588kg / approx. 77mm

Estima (50/55 series)

[Compatible vehicle model] DBA-ACR50W/55W Grade: Aeras *Hybrid not available
[First registration] H18~
Towing capacity: C (750kg or less)
Estimated installation time: 4

★Instruction manual: https://docs.wixstatic.com/ugd/892e4f_652d4c6aba8e4a12b428897ec9784375.pdf

[Steel (steel type)]
Tight Hitch's basic type.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wire tap / High-tension bolts for hitch installation

[Regarding the product]
●All hitch members are ordered. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Since all products are made-to-order, cancellations and changes after an order has been placed are not possible.
●For some vehicle models, we may request a FAX of your vehicle inspection certificate for fitment confirmation.

[Disclaimer]
・Please confirm compatibility before placing an order. We cannot confirm compatibility after an order has been placed.
・The photos are examples, and the installation method and shape vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・Returns and exchanges are not possible for made-to-order products.

[About delivery]
Shipping costs to Okinawa Prefecture will be quoted separately each time.

【 KAWASAKI 】
ULTRA310(-'21)/300/260/250/LX 

●Deck mat for Kawasaki ULTRA310/300/260/250/LX, newly released from UNLIMITED.

●In addition to excellent cushioning provided by its two-layer mat structure,
it is designed with the latest laser processing technology,
which eliminates the surface tension of water to ensure smooth drainage from the deck,
and creates a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
but PSA2, newly developed based on 3M 9786, which offers superior wrinkle resistance, durability, and adhesiveness.

●Comes with double-sided tape

【Disclaimer】
Due to the nature of the product's materials and colors, certain colors (green, orange, red, pink, yellow) may
fade over time and with use.
Please note that fading or discoloration is not covered by warranty.

【Regarding products with "Backorder" or "Pre-order" status】
These products will be custom-made by the manufacturer.
Please note that changes or cancellations after ordering are not possible for custom-made products.
Please allow approximately 2 to 2.5 months for backordered items.

【Manufacturer】SUBARU
【Car model】Forester
【Compatible model】5BA-SK9, 5AA-SKE 4BA-SK5
【Year】H30.7～R3.7
【Compatible grades】5BA-SK9: Touring, Premium, X-BREAK 5AA-SKE: Advance 4BA-SK5: SPORT 【Notes】Detachment of tow hook, heat shield (requires modification)

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】C
【Shape】F-1
【Processing】D-3
【Drilling】-
【Installation time】 2.5 hours

【Regarding the product】
●All hitch members are made-to-order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Please be aware of this.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Regarding shipping】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipping from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup
※Delivery to corporations/companies, and some private residences only
The following cases cannot be accepted:
1. A room in an apartment building
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk of a delivery truck intruding
5. Other special circumstances where delivery is deemed to be hindered

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

The buckle and ratchet parts have been made even more durable.

● Belt width: Approximately 25mm
● Belt length: Approximately 4.5m
● Ratchet to S-hook: Approximately 29cm
*Please excuse any errors as these are measurements taken by our staff.

This new stainless steel ratchet tie-down prevents the hook from falling off when securing items by adding a "stop" function to the "hanging" function of the hook, making it easier and more secure to tie down.

■Material (hook part): Stainless steel (resin coated)
■Fixed side belt length: 300mm
■Retracting side belt length: 3,200mm
■Belt width: 25mm
■Working load: 400kg
■Breaking strength: 800kg

■Foldable type
■Material: Steel
■Maximum load: 360kg
■Stroke: 280mm
■Tire diameter: 140mm

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Steel black
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts
*The color has been changed from Viper color to black.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■Material: Rust-resistant stainless steel

[Product specifications]
■Size/Quantity
JL50-120140: 120-140mm / 2 pieces
JL50-140160: 140-160mm / 2 pieces
JL50-1625: 16-25mm / 10 pieces
JL50-4060: 40-60mm / 10 pieces
JL50-6080: 60-80mm / 5 pieces
JL50-816: 8~16mm / 10 pieces

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■The handle is thick and easy to grip.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 900kg/ 2000LBS

*Body/handle only.

*Winch strap is not included.

■M10 75x45 square pipe vertical bolt

■Bolt size AxBxC: 100x60xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

【Compatible models】Exclusive for KAWASAKI 800SXR
*Part number "K-12" is compatible with 1500SX-R

【Material】Polyester material
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to sewing

Commitment to Quality
1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Handle】The handle area is reinforced with double-layered fabric.
3. 【Buckle】Securely fastens the hull with a single touch

【Disclaimer】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*Returns, exchanges, and cancellations are not accepted for made-to-order products after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so please inquire in advance if you are in a hurry.

K-SXR-BK Black

Boxer shorts based on the legendary classic model!

These seamless pants have no seams and fit perfectly to the body.
Recommended as an inner layer for wetsuits and board shorts.
Since it is a boxer type, it can also be worn as regular underwear.

Material: 70% polyester
20% nylon
Polyurethane 10%

■ Recommended waist size: Men's free size (73-87cm)

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin. Please be aware of this before placing your order.

●This is a single trailer winch handle.

●Can be used as a repair replacement for rusted or deteriorated handles.

●Suitable for most boat trailer winches.

●Material: Stainless steel

●Size: Approx. 19cm x 0.5cm・Handle part: Approx. 11.3cm

●Handle mounting hole: approx. 9.4mm x 12.7mm

*The included nut may not be usable depending on the winch you have.

This is a jacket from the JJETPILOT RX "VAULT" series.

Uses stress-free material ``embossed neoprene'' to achieve comfortable PWC riding.

●100% 360 stretch neoprene for maximum mobility
●Durable YKK back zip for easy on and off
●Jet-lock seam construction increases strength
●Oil slick logo

Can be set up with long johns (product number JA22155) sold separately.

■Applicable image size (height, weight, chest measurement, waist)
M: 170-175cm, 65-72kg, 95-100cm, 76-81cm
L: 175-180cm, 70-77kg, 100-105cm, 81-86cm
XL: 180-185cm, 77-85kg, 105-110cm, 84-88cm