Collection: Best Selling Products

[PWC Compatible Models]

◆ For Yamaha Marine Jet
FX140 FX140 Cruiser (2002-2006)
FX160 FX160 Cruiser (2002-2006)
FXHO (2006-2008)
VX (2005-2015)
VX110SP, VX110DX (2005-2015)
VX Cruiser (2005-2015)
EX (2017-)

● [10 pieces] Case sales

● Yamaha genuine part number: 94709-00409

* The image is for illustration purposes only.

【PWC Compatible Models】For SEA-DOO SPARK

(For other models, see below)
*4-stroke models other than 300 and SPARK: DCPR8E
*300 models (RXT-X/RXP-X/GTX-LTD300): 296000407
●SEADOO Genuine Part Number: 415129403

*Image is for illustration purposes only

BR10ES-NS
●Sold individually
●This product is a separate terminal type (non-solid type)
Terminal Type:Non Solid

※If you want a solid-type terminal, please purchase "BR10ES".

【Please note】
【1】The outer box may have dents or marks from management stickers.
【2】Products with different box designs may be mixed in.
This product is a new, unused outlet item, so please understand this before purchasing. *Please also refer to the photos.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

●A simple sea anchor for small boats and trolling.
●Compared to conventional Japanese-made products, it is extremely easy to load, retrieve, and store, making it ideal for small ships.
-Stainless steel wire is sewn into the edge of the water inlet (opening), so it opens automatically without being put into the water, and the wire acts as a weight.
The anchor effect is immediately apparent, and collection and storage are very easy.
●A chuck is attached to the drainage part (pointed part of the cone), and the effectiveness of the sea anchor can be adjusted by opening or closing this part.

【Product Specifications】
■Material:
Parachute part: 840 denier nylon,
Inside: PVC coat
■Compatible with: For fishing boats up to 28FT (FB boats not available)
■Size: Diameter 90 x total length 140cm
■Weight: Approximately 1.8kg

【please note】
*Cannot be used in stormy weather.
*The rope that connects the sea anchor and the boat (towing rope) is not included.
Please prepare a rope with a diameter of 10 to 12 mm x 1.5 times the total length of the boat.

●A simple sea anchor for small boats and trolling.
●Compared to conventional Japanese-made products, it is extremely easy to load, retrieve, and store, making it ideal for small ships.
-Stainless steel wire is sewn into the edge of the water inlet (opening), so it opens automatically without being put into the water, and the wire acts as a weight.
The anchor effect is immediately apparent, and collection and storage are very easy.
●A chuck is attached to the drainage part (pointed part of the cone), and the effectiveness of the sea anchor can be adjusted by opening or closing this part.

【Product Specifications】
■Material:
Parachute part: 840 denier nylon,
Inside: PVC coat
■Support: Japanese boats up to 25FT, center console boats
■Size: Diameter 60 x total length 120cm
■Weight: Approximately 1.3kg

【please note】
*Cannot be used in stormy weather.
*The rope that connects the sea anchor and the boat (towing rope) is not included.
Please prepare a rope that is 8 to 10 mm in diameter x 1.5 times the total length of the boat.

A handle and line package set for intermediate and above users.
The REACTOR line is a high-performance Spectra rope processed with polypropylene for even greater durability and buoyancy. A rope that allows you to feel the transmission of power.
The EVA grip has a propeller-like anti-slip finish, so even if it gets wet, it will not lose its grip.

The length can be adjusted to 4 types: 60 inches, 65 inches, 70 inches, and 75 inches.
(Including handle)

■Handle width: 15 inches (38cm)
■Line length: 75ft (60+5+5+5)

The long-awaited NEW trailer! [ADEL REVO]

ADEL STEEL BODY
ADEL Series2023 Renewal

Making the trailer look stylish,
it comes standard with 15-inch aluminum wheels with a fin design.

Frame material: Steel, Zinc + Powder coating
Length x Width x Height: 4,005 x 1,690 x 850 mm
Vehicle weight: 190 kg
Load capacity: 1 PWC
Maximum load capacity: 500 kg
Tire/wheel size: 195/45R15 7J ET+35
Trailer standard:Compact8-number

Compact vehicle / First inspection 2 years, subsequent inspections 1 year

[Standard equipment]
15-inch aluminum wheels, stopper jack, tail lights, handbrake, bent axle

*This product is to be picked up at the store.
*Payment is by cash or bank transfer.
*For details, please call us at (059-365-1010).

[Compatible model]: KAWASAKI 550SX (91-94 model)

Top end gasket kit Head gasket required during engine overhaul,
■Base gasket,
■Intake gasket (2 pieces on cylinder side)
■This is an exhaust gasket KIT.

This is the Moby's brand's top-of-the-line model, fully equipped with features such as a front zipper that allows you to put it on and take it off by yourself, an integrated sock design that is a great ally in keeping you warm, and a small zipper for men's genitals.

■ Color: Black/Gray

■ Suitable height: M (165-168cm) L (170-175cm) XL (175-180cm)

■Material: High-performance breathable waterproof material "VAPOR PRO" & abrasion-resistant material "600D"

■Features
TIZIP waterproof zipper with waterproof seal
CR neck and wrist stickers,
2 pockets TPR patch Adjustable cuffs Dynamic panel design

■Specifications
Neck: Chloroprene Wrist: Chloroprene Socks: Latex

Features
1. Chest zipper for easy on and off by yourself
2. The fabric is made of breathable and waterproof material, VAPOR PRO.
3. Waterproof sealing keeps it from getting wet
4. "ACT" motion pattern technology makes it easy to move
5. The knees are made of urethane knee pads, and the hips are made of wear-resistant material.
6. Pockets on sleeves and chest (pockets are not waterproof)
7. Small zipper for easy access to men's restroom

[Notes on dry suits]
The material itself does not have any heat retention properties, so you will need to adjust your innerwear according to the outside air and water temperature.
If you don't need warmth, we recommend wearing a water-absorbent inner layer to protect against sweat. The nylon lining is specially coated, so if the inner fabric is scratched by hard fabrics like denim or metal fittings like key chains, the waterproofing may be reduced, so please be careful when putting on the inner layer. Also, since the material is nylon, it is vulnerable to heat, so please avoid bonfires, etc.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

Primer fittings used when removing the carburetor choke shaft.

[For KEIHIN]
006-538 Primer Inlet
006-539 Blind Cap

This is a cap to be installed when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

●Main jet for CV cab and CDCV cab.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

■Size: 95 x 45 x 10 mm
■Mounting hole pitch: 39 mm
■Sales unit: 1 piece

■Water-resistant
Designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the lighting part underwater, such as by putting the trailer in water. Water may penetrate inside the lamp and cause damage.

Genuine SOREX Combination Lamp

■Product Size: Φ118 x 50mm
■Mounting Pitch: 70mm
■Units for Sale: 1 (2 required for left/right replacement) Universal left/right shape

■Water-resistant specifications
Designed to withstand water from above, such as rain and car washing.
Please do not immerse the light in water, such as by backing a trailer into the water, as water may enter the lamp and cause damage.

●Size: 170×50×45mm
●Mounting pitch: 225 x 52mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Quantity] 1L x 12 pieces set
[Adaptation] 4 stroke
[Quality] 10W-40

●A high-performance oil containing additives based on mineral oil.
●Recommended for all 4-stroke machines.

[Quantity] 1L x 12 pieces set
[Adaptation] 4 stroke
[Quality] 10W-40

●Reduced engine friction and wear and tear.
●It lasts longer and has more stable adhesion than conventional oils.
●It is a 4-cycle engine oil that is fuel efficient and has a cleaning effect inside the engine.

[Quantity] 1L x 12 pieces set
[Adaptation] 4 stroke
[Quality] 15W-50

●Reduced engine friction and wear and tear.
●It lasts longer and has more stable adhesion than conventional oils.
●It is a 4-cycle engine oil that is fuel efficient and has a cleaning effect inside the engine.

[Quantity] 1L x 12 pieces set
[Adaptation] 4 stroke
[Quality] 0W-30

●Developed for drag racing with high-performance 4-cycle racing engine.
●Super multi-grade racing oil.
●Advanced additive technology prevents engine friction and temperature rise and improves maximum output.

[Quantity] 3748ml x 4 bottles set
[Applicable] 2-stroke mixing/separation
[Quality] TC-W3

Excellent rust and corrosion resistance against freshwater and saltwater,
Prevents plug dirt, ring adhesion, and carbon buildup.
High-temperature oil film strength and stability in high-temperature ranges protect high-speed rotation under harsh conditions.

■Size: Outer diameter 15mm, inner diameter 7mm

Takenoko elbow socket for waterline one-touch coupler

[Adaptation] 46mm to 48mm MIKUNI
[Quantity] 1 piece

This gasket has higher performance than the genuine product.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the gasket uses a metal material, so there is no tearing during maintenance!
Manufactured using a special manufacturing method, it has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

■Material: Stainless steel

[Product specifications]
■Size/Quantity
JL51-110133: 11.0~13.3mm / 10 pieces
JL51-155185: 15.5-18.5mm / 10 pieces
JL51-194226: 19.4~22.6mm / 10 pieces
JL51-224256: 22.4~25.6mm / 10 pieces
JL51-256320: 25.6-32.0mm / 10 pieces
JL51-436500: 43.6~50.0mm / 10 pieces
JL51-700780: 70.0~78.0mm / 10 pieces

Clamp using a special tool (product number: CH-207).
The clamping capacity is much greater than that of normal tightening clamps.
Used in SEADOO superchargers and important parts that must not come loose.

This hose has a special coating applied to its surface.

[Product specifications]
■For water (*no oil allowed)
■Size: Inner diameter/thickness/length
JL40SHL19RD: 19mm /4mm /1m
JL41SHL13RD: 13mm /4mm /1m
JL40SHL8RD: 8mm/4mm/1m

■Maximum pressure resistance for regular use 5kg/cm
■Regular heat-resistant temperature ~180℃

■Volume: 420ml spray can

Excellent metal rust prevention

For loosening rusted bolts and nuts.
With excellent water displacement, it can be used for maintenance of motocross bikes and general vehicles after riding in the rain,
and for lubrication and rust prevention of various moving parts when delivering new vehicles.
It can also be used as a moisture repellent for battery terminals, spark plugs, starter motors, etc.

【Please note】
*Due to the nature of the container, we cannot ship to Okinawa Prefecture or remote islands in any prefecture.
*Due to the nature of the product, some items cannot be shipped together.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
After your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take some time. We will notify you of the delivery date as soon as it is confirmed.
Please place your order after understanding these points.

■Volume: 420ml spray can

Cleaner and polish wax.
Contains ultra-fine compounds.
Removes dirt and repairs minor scratches without adversely affecting dark-colored painted surfaces.
Also maintains a strong luster with high-quality silicone wax.

[Notice]
*Due to the nature of the container, shipping to Okinawa Prefecture and remote islands of other prefectures is not possible.
*Due to the nature of the product, some items cannot be shipped together.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
After your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Volume】1L Steel can x 1 bottle

This base oil boasts excellent lubricity even in high-revolution engines,
and places particular emphasis on thermal stability and oxidation stability.
The blend of high-temperature detergent additives keeps the engine interior clean.

KAWASAKI 4-stroke engine oil
4-stroke

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience will not be accepted in principle.
Additionally, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery time as soon as it is confirmed.
We kindly ask for your understanding and to place your order accordingly.

[Applicable models] KAWASAKI 800SX-R (03-09 model) / 800X-2
[Quantity] 1 piece

Fiber 1.2mm

[Compatible PWC Models]

For KAWASAKI 4-stroke
12F / 15F (-2015) / 15S / ULTRA LX(-2015)

★For 2016 and later 15F/LX, use [Part No.: CR9EKB]

●Threaded tip plug type

[Set of 4]

*Corresponds to KAWASAKI genuine part number: 92070-1264
*Image is for illustration purposes only.

[PWC compatible models]

◆For YAMAHA watercraft
FX140 FX140 Cruiser (2002-2006)
FX160 FX160 Cruiser (2002-2006)
FXHO (2006-2008)
VX (2005-2015)
VX110SP, VX110DX (2005-2015)
VX Cruiser (2005-2015)
EX (2017-)

●[Sold as a set of 4]
●YAMAHA genuine product number: 94709-00409 compatible

BR8HS-10
●Sold in boxes of 10.
●Terminal Type: Solid (non-separated)
Terminal Type:Solid(non separated)

【Information】
※Also available for individual sale.
※Image is for illustration purposes only.

BR10ES
●Sold individually. Please purchase the quantity you need.
●This product has an integrated terminal (solid type).
Terminal Type:Solid(non separated)
※If you require a separated terminal (non-solid type), please purchase "BR10ES-NS".

【Disclaimer】
Although this product is new and unused, please note the following points.
We kindly request that only customers who understand and agree to these points make a purchase.
※Please also refer to the photos provided.
【1】The outer box may have sun fading or dirt, management/price stickers attached, or writing.
【2】Products with different print information or designs on the box may be delivered together.

●This is a genuine Kawasaki hose adapter.

【Important: Please read before ordering】
This product is a **manufacturer-order item (genuine part)**.
Once an order is confirmed, it is promptly placed with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience are generally not accepted.
Furthermore, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging and agreeing to these terms.

[Compatible with] MIKUNI carburetor
[Size] Throttle cable mounting hole 9mm

●Used to secure the throttle cable when replacing with an aftermarket carburetor.