Collection: Best Selling Products

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

Total length 180mm x width 75mm x shaft length 100mm.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm

■Material: Stainless steel

■Size: A total length 254 x B stop hole ~ stop hole 93 x C height 68 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 203 x B stop hole ~ stop hole 71 x C height 53 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 152 x B stop hole ~ stop hole 75 x C height 45 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 126 x B stop hole ~ stop hole 54 x C height 39 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

[Product specifications]
■Size: Length 860 x Width 270mm
■Dial diameter: 350mm
■Terminal installation inner diameter: 19mm

■Applicable: For small batteries
■Can be used up to 800 amperes.

This is an ON/OFF switch attached to the battery terminal (negative side).
You can turn the power on/off by tightening or loosening the green knob that comes with the terminal.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

●Material: Stainless steel

-Mounting hole size: 12.8-14.3cm x 12.8-14.3cm

Please note that this product is a showroom display item, so please purchase with that understanding.

This is a long john from JETPILOT's top-of-the-line RX-VAULT series.

The airflow material provides excellent breathability and 100% 360-degree stretch for outstanding mobility.
The removable back protector is a carefully designed feature that reduces impact.

■ 100% 360-degree stretch neoprene for exceptional mobility
■ Durable YKK front zip for easy on and off
■ Jet-Lock Seam Construction for increased strength
■ Seamless underarm panels reduce stress
■ Airflow panels for enhanced breathability and comfort

■ Approximate size guide (Height, Weight, Chest, Waist)
M ：170-175cm・65-72kg・ 95-100cm・76-81cm
L   ：175-180cm・70-77kg・100-105cm・81-86cm
XL ：180-185cm・77-85kg・105-110cm・84-88cm

A simple and natural design cap
The brim is arched.

■Free size

The body is made of comfortable wet material, and the seals on the neck, hands, and feet are made of neoprene that doesn't feel tight, so it eliminates the constricted feeling of conventional dry suits.
This winter wear is suitable for runabout models with minimal water ingress.
Typically, wetsuits are custom-made to fit tightly to the body,
and use 3-5mm neoprene fabric to enhance warmth.
Wet-dry suits, while enhancing warmth, maintain a full-body loose fit, preserving the style of fabric dry suits.
Of course, adjustments can be made with innerwear, and the synergistic effect with the inherent thermal insulation of neoprene provides both warmth and mobility.

(See Notes)
■Suitable Height :
M size 160-170cm
ML size 170-175cm
L size 175-180cm
XL size 180-185cm

■MATERIAL: Chloroprene
*Due to the nature of the product, returns and exchanges are not accepted.

Half-Finger Gloves

These gloves feature PVC molded protectors on the top of the fingers and back of the hand to reduce impact, and Lycra fabric on the joints and sides of the fingers for smoother movement.
The palm is made entirely of Clarino (durable synthetic leather), with double-stitched Clarino reinforcement in areas that rub against the grip, making these gloves both functional and highly durable.

■ Size Chart (Hand Width / Total Length)
(M) 21.5cm / 21.5cm
(L) 22.0cm / 22.0cm
(XL) 23.0cm / 23.0cm

*Please note that these are our flat measurements, so a slight error may occur. (US Standard Sizes)

【Applicable Models】YAMAHA
FX (up to 2011 models), FZS (up to 2012 models)
FX140 / FX160 / HO (06-11) / SHO (08-11) / Cruiser / FZS (-16)
*For FX 2012 models and later, part number Y-12 is compatible.

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover produced domestically, from fabric to sewing.

1.【Tape】Colored tape is used to make it easier to identify the front when putting on the cover.
2.【Reinforcement】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3.【Handle】The handle area is also reinforced with double-layered fabric.
4.【Buckle】Securely fastens to the hull with a single touch.

【Disclaimer】
*The colors of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】YAMAHA EX Series

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. 【Tape】Colored tape is used to easily identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after an order has been placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
1 [S-2B(S-3B)]: RX/RX D.I/HX
2 [S-XPB(S-6B)]: XP (97-)/XP-L
3 [S-RXP-B(S-2B)]: RXP/RXP-X 255 (*)
*RXP-X 260 RS 2012 models and later are not compatible.

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts.
From fabric to sewing, domestically produced in Japan, high quality.

Special Features
1. 【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as reinforcement in the mirror area to prevent rubbing.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after your order has been placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible models】SEA-DOO
1【S-2B(S-3B)】 ：RX/RX D.I/HX
2【S-XPB(S-6B)】 ：XP（97-）/XP-L
3【S-RXP-B(S-2B)】：RXP/RXP-X 255(※)
*RXP-X 260 RS from 2012 onwards is not compatible

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
From fabric to sewing, all made in Japan, high quality

Features
1. 【Tape】The front is marked with a colored tape to make it easy to identify when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as a reinforcement on the mirror parts to prevent chafing.
3. 【Handle】The handle part is also reinforced with double fabric.
4. 【Buckle】Securely fastens the hull with one-touch buckle

【Please note】
*The color of stitches, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies depending on the season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
1 [S-2B (S-3B)]: RX/RX D.I/HX
2 [S-XPB (S-6B)]: XP (97-)/XP-L
3 [S-RXP-B (S-2B)]: RXP/RXP-X 255 (*)
* Not compatible with RXP-X 260 RS 2012 and later

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High-quality, domestically produced fabric and stitching.

Features
1. [Tape] The tape is colored to make it easy to identify the front when putting on the cover.
2. [Backing] Non-woven fabric is used as backing in the mirror area to prevent chafing.
3. [Handle] The handle area is reinforced with a double layer of fabric.
4. [Buckle] Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the production lot.
* As this is a made-to-order product, returns, exchanges, and cancellations are not accepted after the order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
RXP-X 300 (2016-2019)
RXP-X 260 (2012-2015)

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
Fabric and sewing are made in Japan, high quality

Features
1. 【Tape】 Colored tape is used to easily identify the front when putting on the cover.
2. 【Reinforcement】 Non-woven fabric is used as reinforcement for the mirror area to prevent chafing.
3. 【Handle】 The fabric on the handle area is doubled for reinforcement.
4. 【Buckle】 Securely fastens the hull with a single touch

【Please Note】
* The color of stitches, tape, and bands may vary depending on the time of arrival.
* Due to made-to-order production, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so please inquire in advance if you are in a hurry.

S-11B Black

【Compatible Models】KAWASAKI STX
1200STX-R
STX12F / STX15F
STX1100DI / 900STX
STX-160 (2020)

【Material】Polyester material
The interior is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. 【Tape】 Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Backing】 Non-woven fabric is used as backing on the mirror parts to prevent chafing.
3. 【Handle】 The handle area is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the time of arrival.
* As this is a made-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible models】KAWASAKI
For 4-stroke 1500SX-R (2017~) models only

【Material】Polyester material
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, with domestic production from fabric to sewing.

1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as backing for the mirror part to prevent chafing.
3. 【Handle】The handle part is also reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please note】
*The colors of the stitching, tape, and bands may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

K-12B Black

【Compatible Models】YAMAHA FZR

【Material】Polyester fabric
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Backing Pad】Non-woven fabric is used as a backing pad on the mirror area to prevent chafing.
3.【Handle】The handle area is reinforced with double-layered fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

Applicable Models: YAMAHA
XL700 / XL800 / XL1200 / XLT800 / 1200 / VN

Material: Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiberglass parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. [Tape] Colored tape is used to make it easy to identify the front when putting on the cover.
2. [Lining] Non-woven fabric is used as a lining for the mirror sections to prevent chafing.
3. [Handle] The handle area is reinforced with double-layered fabric.
4. [Buckle] Securely fastens the hull with a single touch.

Please Note:
* The color of the stitching, tape, and bands may vary depending on the production lot.
* As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】YAMAHA
GPR800 / 1200 / 1300 / ALL-GP (excluding FZS)
【!】If you are looking for GP800/1200, please choose "Y-13B"

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiberglass parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Backing】Non-woven fabric is used as backing in the mirror area to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single touch.

【Disclaimer】
*The color of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Applicable models】YAMAHA GP800/1200
*For "GPR", item number: Y-2B is suitable.

【Material】Polyester material
The inside is made of long-fiber non-woven fabric to protect the body, and it protects the fiber parts of the hull.
This is a high-quality cover made in Japan from fabric to sewing.

1. [Tape] The tape is colored to make it easy to identify the front when putting on the cover.
2. [Back padding] Non-woven fabric is used as back padding for the mirror part to prevent chafing.
3. [Handle] The handle part is also reinforced with double fabric.
4. [Buckle] Securely fastens the hull with a single touch

【Disclaimer】
*The color of the stitching, tape, and band may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. Please inquire in advance if you are in a hurry, as it varies depending on the season.

【Compatible Models】SEA-DOO
WAKE PRO215 (2008-09)

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to sewing.

Special Features
1. 【Tape】 Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Reinforcement】 Non-woven fabric is used as reinforcement on the mirror parts to prevent rubbing.
3. 【Handle】 The handle area is reinforced with double-layered fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the time of arrival.
* As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 200m Black x Green

●Material: Polypropylene (PP)

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 100m Black x Green

●Material: Polypropylene (PP)

We also have a good value 200m roll.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 50m Black x Green

●Material: Polypropylene (PP)

There are also 100m and 200m rolls available.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 20m Black x Green

●Material: Polypropylene (PP)

■BOX size: 463×252×385mm (approx. 37L)
■FRP
■Included: Mounting bolts (stainless steel), key

【Requests and Notes for Ordering】
※Please provide the following trailer information when ordering: (model, year, chassis number)
※This information will be used to confirm compatibility with the manufacturer when arranging the product.
※For more details, please refer to the image "Requests When Ordering."

This is a made-to-order product.

● One left and right set
● By reducing shocks and vibrations, it improves the running stability of the trailer and reduces impact on the cargo.

--- [Request when ordering] --------------------------------------- ----------
The following information is required for product arrangement.
Please fill in the following information in the request/remarks column when ordering.
● Trailer model name
● Trailer model year
● Stamped number (The number stamped on the front of the trailer.)
Example: For SOREX, notation like [Okayama] - [Okayama]
* As this is a made-to-order product, cancellations and changes will not be accepted after order confirmation (scheduled guidance).
Please note that returns will not be accepted.

*May not be installable depending on the vehicle model.

For SEA-DOO 4-stroke 1503 engine
●Genuine product number (OEM): 420950771

●SGS cylinder head gasket
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

【Applicable Models】SEA-DOO
RXT-X 255 (2008-09)
RXT 215 (2008-09)
RXT (2005-07)
GTX-LTD (2005-08)
GTX155 (2008-09)
GTI SE 130 (2007-10) / GTI SE 155 (2007-10)
WAKE 215 (2007-08) / WAKE 155 (2007-10) / WAKE (2005-06)
*WAKE can be used with the pole removed.

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to sewing.

Attention to Detail
1. 【Tape】 Colored tape is used to easily identify the front when covering.
2. 【Reinforcement】 Non-woven fabric is used as reinforcement on the mirror parts to prevent chafing.
3. 【Handle】 The handle part is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Disclaimer】
*The colors of the stitching, tape, and band may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Applicable Models】SEA-DOO 3D

【Material】Polyester material
The interior uses long-fiber non-woven fabric to protect the body and the fiber parts.
High quality, domestically produced from fabric to sewing

Commitment to Quality
1. 【Tape】 Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Reinforced lining】 Non-woven fabric is used as a reinforced lining on the mirror parts to prevent rubbing.
3. 【Handle】 The handle parts are also reinforced with a double layer of fabric.
4. 【Buckle】 One-touch buckles securely fasten the hull.

【Disclaimer】
*The colors of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after an order has been placed.
Production lead time is 2 weeks to 1 month. As it varies by season, please inquire in advance if you are in a hurry.

【Compatible models】SEA-DOO FISH PRO155 (2019)

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High-quality, domestically produced fabric and stitching.

Key Features:
1. 【Tape】Colored tape is used to easily identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3. 【Handle】The handle area is reinforced with a double layer of fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please note】
*The color of the stitches, tape, and bands may vary depending on the production batch.
*As this is a build-to-order product, returns, exchanges, or cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies depending on the season, so please inquire in advance if you are in a hurry.

【Compatible Models】SEA-DOO
SPARK 2-up (2014-19)
SPARK 2-up TRIXX (2017-19)

【Material】Polyester
The inner side uses long-fiber non-woven fabric to protect the body and fiber parts.
High quality, domestically produced from fabric to sewing

Features
1. 【Tape】 Colored tape is used to make it easy to identify the front when covering.
2. 【Backing】 Non-woven fabric is used as backing for the mirror parts to prevent chafing.
3. 【Handle】 The handle part is reinforced with double-layered fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please note】
* The color of the stitching, tape, and bands may vary depending on the production batch.
* As this is a made-to-order product, returns, exchanges, or cancellations are not accepted after placing an order.
Production lead time is 2 weeks to 1 month. As it varies by season, please inquire in advance if you are in a hurry.

S-14B Black

【Compatible Models】KAWASAKI
ULTRA130 / ULTRA150

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiberglass parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1.【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2.【Backing】Non-woven fabric is used as a backing on the mirror area to prevent chafing.
3.【Handle】The handle area is reinforced with a double layer of fabric.
4.【Buckle】Securely fastens the hull with a single click.

【Disclaimer】
*The colors of the stitching, tape, and bands may vary depending on the production lot.
*Since this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

●Towing speed: 5km/h or less (suitable for towing buggies, etc.)
●Attachments: Bolts and special spacers

【please note】
Powered towing using this coupler is not a trailer, so it cannot be towed on public roads.
Towing speed: Please strictly observe the use at 5km/h or less. (Cannot be used on uneven roads even if it is less than the value on the left)
When bouncing, the instantaneous load is 2 to 3 times the weight, which can damage parts such as the axle shaft.

We also have the "JB104SUS reinforced axle shaft kit" for heavy boats.
If you are towing with power, we recommend replacing it.

Astro

[Compatible model] CL14G

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Astro

[Compatible model] CL14G

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Astro

[Compatible model] CL14G

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

【Compatible models】KAWASAKI 12F/15F
●Allows crankshaft rotation with the engine mounted in the hull.
●Use when replacing the camshaft, etc.

【Regarding genuine parts】
---------------------------------------------------------------------
*As this product is genuine, cancellations and returns after order placement are not accepted.*
Please confirm the following items before placing your order.
1. Manufacturer
2. Model name (common name): Please confirm from the Vessel Inspection Certificate (the "Subject" on the inside back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate affixed to the side or rear of the hull, or in the Vessel Inspection Certificate (the "Subject" on the inside back cover).
---------------------------------------------------------------------
●Regarding displayed prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please understand the above in advance.

【Please confirm before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to order content due to customer convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

[Product number: 31552] For jet sling harness

4 pieces are required when replacing 1 unit.

[Disclaimer]
*Please note that the belt color may change without notice.