Collection: All items

【Compatible models】
■KAWASAKI KAWASAKI ALL models (excluding 450/550)
■SEA-DOO 2-stroke model

[Application] A special tool required for installing and removing the impeller.

The angled tip reduces resistance at the start, allowing for smooth towing.
The backrest also prevents lateral sliding.

■Size: 190×160×62cm
■Max. capacity: 2 people
■2 towing points
■PVC tube
■Nylon full cover
■Easy-to-connector attached to main unit (non-removable)
*Main unit only; pump and rope are not included.

[Comes with a free JSPTOKAI original bag, convenient for storing gear!]
A 56L large-capacity bag that can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The bottom is made of mesh material for good drainage.
This bag solves all your problems with carrying and storing gear!
Size: 50x45x25cm, Fabric: Clear PVC black mesh

This classic deck tube, with its simple design, offers a top-class thrilling experience as you tow close to the water's surface.

【Front Towing Specifications】
■Size: 187.5×155cm
■Maximum Capacity: 3 people
■Nylon Full Cover
*Tube only; pump and rope are not included.

【Comes with a JSPTOKAI Original Bag, convenient for storing gear!】
This 56L large-capacity bag can store up to four life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The mesh bottom allows for water drainage.
This bag provides an instant solution for carrying and storing all those items you used to struggle with!
(Size: 50x45x25cm / Fabric: Clear PVC with Black Mesh)

●Higher backrest prevents falling into the water.
●Handle position has been changed to be easier to grip.
●New boarding handles allow for a more secure ride.

This is the same shape as AIRHEAD's Marble series,
and can be pulled from either the front or back for double the fun.
The backrest also makes it easy for women and children with less arm strength to maintain their posture.

■Size: 167×152×101cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover
*Main unit only, pump and rope are not included.

[Comes with a JSPTOKAI original bag for convenient storage of gear]

This 56L large-capacity bag can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The bottom is made of mesh material for good drainage. With this bag,
you'll have all the goods you always needed (size
: 50x45x25cm /fabric: clear PVC black mesh)

A new sensation featuring a flexible fabric "Flex Foam Seat" in the seat area. Like a deck tube, you can lie down, kneel, or sit on the seat, allowing both adults and children to enjoy it in their preferred riding style.
[This series is available in 2-person and 3-person models.]

■ Size: 183×152cm
■ Max capacity: 2 people
■ PVC tube
■ Nylon full cover type
*Main unit only; pump and rope are not included.

[Comes with a JSPTOKAI original bag, convenient for storing gear!]
This 56L large-capacity bag can store up to four life jackets. The U-shaped zipper allows the top to open wide for easy storage of marine gear.
The mesh bottom allows water to drain out. This bag is perfect for all the gear you always needed.
(Size: 50x45x25cm / Fabric: Clear PVC with black mesh)

By making the classic donut-shaped tube into an arrow shape, stability and controllability are improved, making it a standard model that can be enjoyed by both adults and children!

■Size: 127×122cm
■Maximum capacity: 1 person ■PVC tube ■Nylon half cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

The basic shape is similar to the Bubba series,
but the Bingo can reduce the amount of air pumped in and out due to its lower backrest.
With a backrest that fully supports your bottom, it can be considered a series designed for energy conservation.
Towing is possible from two points (front and back).
[This series is available in 2-person, 3-person, and 4-person models.]

■ Size: 175 x 172 cm
■ Max Capacity: 2 people
■ PVC Tube
■ Nylon Full Cover
■ Easy-to-Connect included

※ Main unit only; pump and rope are not included.
[140] (Yu-Pack)

The flex wing gives you complete control over the tube.
For those who are tired of just being pulled along!
Experiment with various maneuvers such as jumps, slaloms, and barrel rolls by shifting your center of gravity through weight transfer and changing your sitting position.
Find the playstyle that suits you best.
It also requires less air, making inflation a little easier.

■ Size: 188 x 178 cm
■ Max Capacity: 4 people
■ PVC Tube
■ Nylon Full Cover
■ Easy-to-Connect main unit included (non-removable)

[Comes with a FREE JSPTOKAI Original Bag, convenient for storing gear]

A 56L large-capacity bag that can store up to 4 life jackets.
The U-shaped zipper allows the top to open wide for storing marine gear.
The mesh bottom allows water to drain.
This bag will solve all your problems with carrying and storing your gear!
(Size: 50x45x25cm / Fabric: Clear PVC Black Mesh)

Inflatable design

●Stable buoyancy allows up to 6 people to ride.
●Zippers on the sides allow connecting water walkways.
●Can also be connected to the separately sold slider [Part No. W19-2210].
●Recommended for use as a connecting passage between moored boats or as a pontoon.

■Product size: 183×305cm
■Maximum capacity: 6 people
■PVC specification
*This product cannot be towed.

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your precious boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates even large, reinforced ratchets.
Made from the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt has been set to the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1 piece
■Material (main body): Chloroprene
■Attachment method: Velcro

【Please note】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
We cannot accept exchanges or returns other than for product defects.

Trailer parts Boat trailer Lashing belt Wetsuit fabric

【Size】
■When rolled: 90×290mm
■When unrolled: 250ｘ290mm

Protects your boat's hull from scratches caused by ratchets and belts.
This large type easily accommodates large, reinforced ratchets.
Made of the same material as wetsuits, it's soft, stretchy, and fits snugly to cover the hull.
It's convenient because you can attach it after setting the belt to the cargo.
Compared to types that need to be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: 1
■Material (main body): Chloroprene
■Attachment method: Velcro closure

*Standard size 【ULT131-M】 has a white logo
*Large size 【ULT131-L】 has a red logo

Trailer Parts Boat Trailer Lashing Belt

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

【Compatible models】All SEA DOO models
【Material】Polished stainless steel

【Size】
・Mounting hole pitch: Approx. 44mm
・Screw part: M8 x 24mm
・Hook part: 136 x 87 x 40mm (width x height x depth)
・Weight: Approx. 345g

Luxurious mirror-finished stainless steel!
Replacing the cheap genuine hook with this one will definitely enhance the visual appeal!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

【Compatible models】KAWASAKI ULTRA310LX (-'21) (※For use with UNLIMITED adjustable handle mounts [UL35003], [UL35003-ULD], and UL35007 head plate)

A plate for relocating the jet sound amplifier unit equipped on the ULTRA310LX (-'21).
This allows for the replacement of the handle mount.

■Quantity: 1
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For the company's UL35300 shockless handle mount

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For UNLIMITED UL35003-DAJS, AJS adjustable handle mount series

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Applicable models] KAWASAKI ULTRA300, 310 (-'21) series
*For UNLIMITED shockless mount (UL35300) only

Installed in the throttle case of ULTRA300, 310 (-'21) series
Plate for relocating the cruise control switch. (For UL35300 only)

By using it when replacing the stock throttle lever with an aftermarket part,
There is no need to remove the cruise control function.
■Material: Stainless steel

[Compatible models] KAWASAKI Kawasaki
For ULTRA310R genuine mount only

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.

■Material: Stainless steel (mirror finish)

[Compatible models] KAWASAKI
STX160 series
STX series
800X-2
ULTRA series (※)
*2022 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

■Handlebar clamp: Compatible with standard handlebars (diameter 22+-0.2mm, 7/8")

An innovative steering mount kit with a built-in spring in the steering mount.
The moderate spring repulsive force absorbs shock during riding and reduces rider fatigue.

The stroke amount is a 7mm stroke that has a movable range that does not easily affect riding.
To achieve smooth movement, lubrication is possible from the grease nipple on the top of the steering mount.
The internal components are made of stainless steel, and the steering mount body is made of aluminum billet using a precision machining center.

[Information] There are optional items sold separately.
[UL061] Fat bar clamp
[UL062] Offset clamp

【please note】
2022 ULTRA 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

[Applicable model] KAWASAKI KAWASAKI 800X-2
■Bar clamp: Compatible with 7/8" bar (standard type φ22.2)

Evolution steering system!
Bearing type steering system kit for Kawasaki 800X-2.
By changing the steering stem from the original bush type to a bearing, smooth steering without rattling is possible.
The steering shaft is made of aluminum for maximum strength and rigidity.
In addition, the steering feel using sealed bearings is characterized by smoothness that far exceeds that of the OEM steering mount.

The billet aluminum steering arm has a high-strength aluminum construction with excellent strength and rigidity, and the ball joy attachment position can be adjusted.

Includes lower bearing unit and [UL35003] standard 80mm handle mount kit.
All aluminum parts are anodized for excellent corrosion resistance.

[Information] The following can be used as optional parts.
[UL061] Fat bar clamp
[UL062] Offset clamp

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image