Collection: All items

For SEA-DOO 4-stroke 155mm pump (for 185/155/130 horsepower)
[Compatible] SEA-DOO pump diameter 155mm
[Representative models] GTX155('04-) / GTX SC 185 / WAKE155 / GTI155 / GTI130

●Genuine part number (OEM): 267000419 (old part number: 267000104)

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

SENSOR PRESSURE AND TEMPERATURE AIR
●Genuine parts (OEM: 515178563)

●SGS Pressure and Temp Sensor ●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 4-Stroke Temperature Sensor
LIQUID SENSOR

●Genuine Part Number (OEM): 278002895, etc.

●SGS Temp Sensor LIQUID SENSOR
●This is an affordable aftermarket replacement part with performance equivalent to genuine parts.

SEA-DOO 4-stroke 1503 / 1630 ACE
OEM Part Number: 420851754

SGS Spark Plug Pipe
●For 1 cylinder
●An affordable aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 4-stroke 1503 (excluding 2018 and later models, 300 and SPARK)
●Genuine part number (OEM): 296000307

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Compatible models] SEADOO
●Genuine parts (OEM: 420950820)

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

【Made-to-order product】Please note that it may take approximately one month from the time of order.
※Cancellations are not accepted after an order has been placed for a made-to-order item. Thank you for your understanding.

【Compatible models】KAWASAKI SX-R 1500 4-stroke model

Billet Sponson TYPE2 Fishtail

Applicable models: KAWASAKI ULTRA Series (250 / 260)
ULTRA250X
ULTRA260X / ULTRA260LX

This is a genuine post replacement handle mount for Kawasaki ULTRA250/260.
We remade it with a taper from the bottom to the center. It's easy to install, simply by replacing the standard post.
It improves maneuverability and gives your handlebars a cool look.

SE-027013 (Fits standard diameter handlebars)
SE-027013F (Fits fat bars)
SE-027013BK (Fits standard diameter handlebars)
SE-027013BK-F (Fits fat bars)

[Compatibility] KAWASAKI ULTRA310/300/260/250/LX/STX-15F/12F/SX-R
SEA-DOO 2010 and later models ALL (RXT as 260 RS 2012 and later models excluded)

●3784ml of stock solution + mixer + hose adapter

[Application]
Preventing salt damage such as corrosion and rust due to the influence of salt
For flushing marine engines, cleaning hulls, drives, cars, and trailer undercarriages.

●Acts directly on salt to remove salt buildup, corrosion, dirt, etc., protecting tools from salt damage.
●Contains no harmful substances and is 100% biodegradable, making it environmentally friendly and safe to use.

●Not only marine products but also various items used in coastal areas,
They suffer from problems such as corrosion and rust due to the effects of salt.
Salt Away is a strong ally for those who have problems with salt damage!

●Salt Away (salt corrosion inhibitor) that can be effectively washed with water.

[Compatible Models]
YAMAHA GP1800 (2017-2018) / GP1800R SVHO (2019-)

The intake grate is the part that acts as the inlet for the water flow that sends water to the pump case, and it has the effect of improving contact with the water surface.

【Compatible Models】YAMAHA
FX SVHO (2014-2022)
FX SHO/HO (2012-2022)

This part serves as the water inlet that feeds water to the pump,
and it has the effect of improving grip on the water's surface.

Intake Gate

【Compatible models】YAMAHA FX('19-)
FX SVHO (2019-20)
FX LTD SVHO (2019-20)
FX HO (2019-20)
FX CRUISER SVHO (2019-20)
FX CRUISER HO (2019-20)

Improves top speed and handling performance.

●Prevents damage to the supercharger unit and intake tube when the throttle is off.

●Performance type: Installed between the throttle body and the intercooler joint pipe.

●Made by HKS

Yamaha FX Cruiser SVHO    2014-2024
Yamaha FX Limited SVHO    2017-2024
Yamaha FX SVHO    2014-2024
Yamaha GP SVHO (1.8L)    2024
Yamaha GP1800R SVHO    2020-2023
Yamaha GP1800R    2019
Yamaha GP1800    2017-2018
Yamaha FZR    2009-2016
Yamaha FZS    2009-2016
Yamaha FX Cruiser SHO (1.8L)    2008-2014
Yamaha FX SHO (1.8L)    2008-2014

Applicable models: YAMAHA
GP1800
VXR (2011~)
VXS (2011~)

Improved exhaust flow enhances performance.

【Compatible Models】YAMAHA
FX CRUISER SHO (2012-14)
FX CRUISER HO (2012-18)
FX HO (2012-18)
FX SHO (2012-15)
FX CRUISER SVHO(2014-18)
FX SVHO(2014-18)
FX LTD SVHO(2017-18)

Bypassing the resonator improves exhaust flow and enhances performance.

【Compatible Models】SEA-DOO
GTR230(-2019)
GTR-X 230(-2019)
*For 2020 GTR230 models, please refer to part number: RS16121.

This product bypasses the resonator located between the muffler and water box to improve exhaust efficiency.

【Compatibility】KAWASAKI ULTRA310 series

*When installing on a RIVA waterbox, "RK15-238-325" is required.

●By removing the stock resonator, exhaust flow becomes smoother, which leads to improved acceleration and top speed.

●You can also enjoy the change in exhaust sound.

Applicable models: YAMAHA
YAMAHA 4-stroke FX (excluding FX-SHO/FZR/FZS)/VX
(*) Cannot be used with FX-SHO/FXR/FXS

Guidance regarding genuine parts
---------------------------------------------------------------------
*As this product is a genuine part, cancellations or returns after order placement are not accepted.*
Please confirm the following items before placing your order.
1. Manufacturer
2. Model Name (Common name): Please check your ship inspection logbook (under "Subject" on the inside back cover) or the decal on the hull.
3. Year: The year can be determined from the last two digits of the Hull Identification Number (HIN).
(Example) Hull Identification Number: KAW12345A607 → 2007 model year
The Hull Identification Number (HIN) is stated on a plate attached to the side or rear of the hull or in the ship inspection logbook (under "Subject" on the inside back cover).
---------------------------------------------------------------------
● About the displayed prices
1. Prices and specifications are subject to change without notice.
2. Due to changes in manufacturer part numbers, prices, etc., the listed price may differ from the actual selling price. In such cases, we will contact you.
Please be aware of the above in advance.

Please read before ordering.
This product is a **manufacturer-ordered product (genuine part)**.
As we will promptly place an order with the manufacturer after your order is confirmed, cancellations or changes to order details due to customer convenience are not accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order with prior understanding.

[PWC compatible models]
KAWASAKI For Kawasaki 4 stroke

For ULTRA series
250X
260X/260LX
300X/300LX
310X/310LX/310SE/310R

●KAWASAKI genuine product number: 92070-3707

●Hard type
●With 3/4 flange
-Size: Total length 120 (grip part 95) x 29mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

Fine granular protrusions provide high grip strength.
A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

Elgrand *“Rider specification” & “Highway Star” NG

[Compatible models] AVWE/ALWE/ALWE/50, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling * "Rider specification" & "Highway Star" NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

NISSAN STAGEA
【Compatible model】WGC/WGNC34

This hitch member set combines a stylish oval-shaped steel hitch member manufactured by the lost-wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and removable pin are made of stainless steel, while the member and mounting stays are baked-painted.
The ball mount also features an O-ring to reduce rattling noise.

******************************
【Towing Capacity】B
【Ball Mount】B-9
【Installation Difficulty】☆☆☆
Requires drilling and welding
******************************

【Half Stainless/Combination Hitch (CHC)】
*Main bar is steel, with accessories (ball mount, hitch ball, removable pin) made of stainless steel*

【Set Contents】
Stainless steel ball mount / Stainless steel hitch ball / Stainless steel removable pin / Steel mounting stay/bolts / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approx. 2-3 weeks.
●For some car models, we may ask for a fax of your vehicle inspection certificate for fitment confirmation.

【Important Notice】
・Please confirm compatibility before placing your order.
・Photos are examples; installation method and shape may vary depending on the car model.
・Processing may be required on the towing vehicle side; please inquire for details.
・As this is a build-to-order product, returns and exchanges are not accepted.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・Payment by cash on delivery is not accepted as it is a direct shipment from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping by sea.

NGK spark plugs for outboard motors

[LKR6E compatible model] DF200A/200AP

● Sold in single units
*The image is an illustrative image.

【Compatible Models】KAWASAKI 800X-2

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to sewing.

Key Features
1. 【Tape】The tape is colored to make it easier to identify the front when putting on the cover.
2. 【Handle】The handle area is reinforced with double-layered fabric.
3. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
Red is a limescale remover. Cleans stubborn water stains caused by hard water from seawater, lakes, and rivers that have accumulated on the surface.

[Application] Water scale removal
[Contents] 473ml
[How to use] First, rinse the surface with water to remove any rough dirt.
Spray a generous amount onto the surface and rub in a circular motion for 20-60 seconds.
Then rinse with water. We recommend using it twice for stubborn water stains.
*Never use on aluminum or alumite processed products. It will damage the paint.
*Do not leave it unattended with it applied to the surface.
*Please be sure to test on an inconspicuous area before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.Avoid using in a closed room and use in a well-ventilated place.
4. If swallowed, drink a glass of water and seek medical attention immediately.
5. If it gets into your eyes, immediately rinse with plenty of water.
6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.

Green is an all-purpose cleaner that removes built-up dirt and exhaust residue from painted surfaces on a variety of surfaces and materials, including boat hulls, bikes, vinyl seats, upholstery, carpets, tires, and more.

[Contents] 473ml
[How to use] Spray directly, wash with a sponge or soft brush, then wipe with a damp soft cloth.
*Do not use on aluminum products or anodized products. It will damage the paint.
*Please try it in an inconspicuous place before use.
*Do not leave the product unattended. It will damage the paint.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

●JL399 holder set bag only.
●Convenient for storing gasoline cans in your car or on the steps of a standing jet without getting dirty.
*Gasoline cans are not included.

[Set contents]: 1 holder bag (made of neoprene), 1 lashing belt (metal part made of stainless steel), 2 gunwale hooks (aluminum poly coated). *Gasoline cans are not included in the product.
●By installing it, you can load horizontal 20L gasoline cans on the rear deck.
●Space is required approximately 300mm before and after the deck surface.
*Cannot be used or installed on boats with an R-shaped gunwale. *

Due to the durable sling belt type belt with a long plate and a width of 50 mm,
Runabout boats can also be lifted stably.

The plates are poly-coated to prevent scratches on the boat.

[Product specifications]
■Plate (length x width): 830 x 50mm
■Plate part: Aluminum poly coating processing
■Maximum load: 500kg
■With anti-slip pad

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

■ Kit Contents
・EVA mat × 1
・Gunnel hook × 2
・Lashing belt with ratchet × 2

*Gasoline cans are not included in this kit.*

● A lashing kit for securing stainless steel jerry cans to the rear deck of a PWC.
● Includes a high-grade EVA mat and lashing belts to prevent scratches to the hull when securing the jerry can.
● The EVA mat is CNC processed, designed to prevent the tank from shifting.
● Both the ratchet and gunnel hook parts are made of rust-resistant stainless steel.
● By installing this kit, you can carry vertical gasoline cans (e.g., JL15006-20/25) on the rear deck.

*Gasoline cans are not included with the product.
*Approximately 300mm of space is required at the front and back of the deck surface.
*Cannot be used on boats with R-shaped gunwales.

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models] =============================================
●KAWASAKI 4 stroke (※)
*Cannot be used with ULTRA300/310, genuine NO.16097-0007 is best.
*External oil filter (*equivalent to genuine part number 16097-0008)
-------------------------
●YAMAHA Yamaha 4 stroke (*)
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)
================================================== ========

This is an aftermarket oil filter. It is a great value at a lower price than the genuine product.
Regarding the oil filter... Inside the engine, sludge is generated from impurities contained in fuel and oil, and metal powder is generated due to friction between the cylinder and piston rings. The engine oil can wash away the generated substances, allowing the engine to continue working normally.
However, if the engine oil is used repeatedly over a long period of time, dirt and deterioration will occur in the engine oil, so it is cleaned through a filter to prevent dirt from re-adhering and deterioration.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

Applicable Models: Kawasaki ULTRA310LX/310LX-S

By using the tie-down kit,
large items such as cooler boxes and fuel cans can be easily secured.

■Approx. 40kg load capacity (88lbs load capacity)

【Note】
*Securing items such as lashing straps are not included.
*This product is not intended for towing, so please do not use it for that purpose.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these conditions.

KAWASAKI Genuine (Black)
■Net volume: 100g

This is a silicone-based liquid gasket.
It offers excellent cold, heat, water, and oil resistance, and cures at room temperature to form a rubber-like elastic body.

【Please Read Before Ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging these points in advance.

[Compatibility] Kawasaki 1500SX-R (2017~) / SEADOO Spark, etc.
[Product number] J-150S / Jet Launcher 4-wheel

■Size (total length x total width x rail width): 2050 x 820 x 300 mm
■Total weight: 31 kg
■Frame weight: 13 kg
■Material: Aluminum

●1.4 times stronger than conventional frames
●Each bracket part is securely fastened with M8 bolts and nuts without wobbling. ●The frame is lengthened to improve balance according to the length of the boat, and the axle part is reinforced to withstand the weight of 4-cycle engines.
The axle shaft is a single piece (left and right through pipe) like the runabout jet launcher, and the axle square frame and shaft collar are made of glass fiber reinforced plastic molding, ensuring a tight and secure fit without wobbling.
●The handle part has a bar grip type shape for easy carrying by two people on both sides.
.

*Shafts and plastic collars should be replaced periodically.
*2-3 people are required for loading at the waterfront and transporting on sandy beaches.
*For rearward movement, it is recommended to have the boat's rear facing the handle side, but when carrying in the opposite direction, please be careful of fatigue and damage to the handle side due to load, and if the ride plate at the rear of the boat touches the ground.
.

[About payment and packaging]
For manufacturer-direct products
●Payment only. (Cash on delivery not accepted)
●Cannot be combined with other items

[About delivery]
If the recipient of this product is a private residence, a separate handling fee may be required for the billing amount.

【】Product number J-1480-4X / Jet Launcher 4-Wheel
【Compatibility】All models (suitable for tandem/runabout) *With center reinforcement frame

【Product Specifications】
■Overall length x Overall width x Rail width: 2,160 x 1,070 x 480mm
■Total weight: 37kg
■Frame weight: 12kg
■Sliding rail, hook standard equipment

【Double Hook Specifications】
Even 300kg class models can be moved easily and smoothly.
Direction changes are now even more convenient with a handle for angling in 2-wheel mode. It is more balanced than a 2-wheel type, and even large, heavy boats nearby can be moved just by pushing.

【Payment and Packaging】
This is a direct shipment product from the manufacturer.
●Payment only. (Cash on delivery not available)
●Cannot be bundled with other items

【Delivery】
If the recipient of this product is an individual, a separate fee may be required in addition to the billed amount.